Lignin-based polymer with high phenolic hydroxyl group content prepared by the alkyl chain bridging method and applied as a dopant of PEDOT

Abstract

Inspired by the importance of the phenolic group to the electron transporting property of hole transport materials, phenolic hydroxyl groups were introduced in lignosulfonate (LS) via the alkyl chain bridging method to prepare phenolated-lignosulfonate (PLS). The results showed that the phenolic group was boosted from 0.81 mmol∙g^–1 of LS to 1.19 mmol∙g^–1 of PLS. The electrochemical property results showed two oxidation peaks in the cyclic voltammogram (CV) curve of PLS, and the oxidation potential of the PLS-modified electrode decreased by 0.5 eV compared with that of LS. This result indicates that PLS is more easily oxidized than LS. Based on the excellent electron transporting property of PLS, PLS was applied as a dopant in poly(3,4-ethylenedioxythiophene) (PEDOT, called PEDOT:PLSs). PLS showed excellent dispersion properties for PEDOT. Moreover, the transmittance measurement results showed that the transmittance of PEDOT:PLSs exceeded 85% in the range of 300–800 nm. The CV results showed that the energy levels of PEDOT:PLSs could be flexibly adjusted by PLS amounts. The results indicate that the phenolic hydroxyl group of lignin can be easily boosted by the alkyl chain bridging method, and phenolated lignin-based polymers may have promising potential as dopants of PEDOT to produce hole transporting materials for different organic photovoltaic devices.

Keywords

lignosulfonate / phenolic group / PEDOT:PLS / hole extract layer / energy level

参考文献

[1] Bauri J, Choudhary R B, Mandal G. Recent advances in efficient emissive materials-based OLED applications: a review. Journal of Materials Science, 2021, 56(34): 18837–18866

[2] Li S, Cao Y L, Li W H, Bo Z S. A brief review of hole transporting materials commonly used in perovskite solar cells. Rare Metals, 2021, 40(10): 2712–2729

[3] Anrango-Camacho C, Pavón-Ipiales K, Frontana-Uribe B A, Palma-Cando A. Recent advances in hole-transporting layers for organic solar cells. Nanomaterials, 2022, 12(3): 443

[4] Sun C, Zhu C, Meng L, Li Y. Quinoxaline-based D-A copolymers for the applications as polymer donor and hole transport material in polymer/perovskite solar cells. Advanced Materials, 2022, 34(22): 2104161

[5] Cameron J, Skabara P J. The damaging effects of the acidity in PEDOT:PSS on semiconductor device performance and solutions based on non-acidic alternatives. Materials Horizons, 2020, 7(7): 1759–1772

[6] Lian H, Jun N, Bolag A, Hexig A, Gerile N, Tegus O, Lin S. Optimization of PEDOT:PSS hole transport layer toward the organic solar cells with high fill factor. Diffusion and Defect Data, Solid State Data, Part B: Solid State Phenomena, 2019, 288: 113–118

[7] Choi J H, Choi H J, Shin J H, Kim H P, Jang J, Lee H. Enhancement of organic solar cell efficiency by patterning the PEDOT:PSS hole transport layer using nanoimprint lithography. Organic Electronics, 2013, 14(12): 3180–3185

[8] Zhao Z, Yuan L, Huang J, Shi J, Cao Y, Zi W, Zhang W. Modified HTL-induced efficiency enhancement for inverted perovskite solar cells. Organic Electronics, 2020, 78: 105557

[9] Wang J M, Wang Z K, Li M, Hu K H, Yang Y G, Hu Y, Gao X Y, Liao L S. Small molecule-polymer composite hole-transporting layer for highly efficient and stable perovskite solar cells. ACS Applied Materials & Interfaces, 2017, 9(15): 13240–13246

[10] Tang H, Liu Z, Hu Z, Liang Y, Huang F, Cao Y. Oxoammonium enabled secondary doping of hole transporting material PEDOT:PSS for high-performance organic solar cells. Science China. Chemistry, 2020, 63(6): 802–809

[11] Chang S H, Chen W N, Chen C C, Yeh S C, Cheng H M, Tseng Z L, Chen L C, Chiu K Y, Wu W T, Chen C T, Chen S H, Wu C G. Manipulating the molecular structure of PEDOT chains through controlling the viscosity of PEDOT:PSS solutions to improve the photovoltaic performance of CH₃NH₃PbI₃ solar cells. Solar Energy Materials and Solar Cells, 2017, 161: 7–13

[12] Fu Q, Li Y, Wang X, Li Q, Wang F, Yang R. The importance of the molecular weight of PEDOT hole transporting materials for efficient organic solar cells. Journal of Materials Chemistry C: Materials for Optical and Electronic Devices, 2020, 8(48): 17185–17193

[13] Jiang X, Yu Z, Zhang Y, Lai J, Li J, Gurzadyan G G, Yang X, Sun L. High-performance regular perovskite solar cells employing low-cost poly(ethylenedioxythiophene) as a hole-transporting material. Scientific Reports, 2017, 7(1): 1–9

[14] Han S, Jiang X, Yu Z, Wan X, Zang J, Zhang C, Rui H, Yang X, Hagfeldt A, Sun L. Side-chain engineering of PEDOT derivatives as dopant-free hole-transporting materials for efficient and stable n-i-p structured perovskite solar cells. Journal of Materials Chemistry C: Materials for Optical and Electronic Devices, 2020, 8(27): 9236–9242

[15] Li Y, Zeng W. PEDOT dispersed with sulfobutylated phenol formaldehyde resin: a highly-efficient hole transport material in polymer solar cells. Macromolecular Materials and Engineering, 2016, 301(2): 133–140

[16] Li Y, Hong N. An efficient hole transport material based on PEDOT dispersed with lignosulfonate: preparation, characterization and performance in polymer solar cells. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2015, 3(43): 21537–21544

[17] Hong N, Xiao J, Li Y, Li Y, Wu Y, Yu W, Qiu X, Chen R, Yip H L, Huang W, Cao Y. Unexpected fluorescent emission of graft sulfonated-acetone-formaldehyde lignin and its application as a dopant of PEDOT for high performance photovoltaic and light-emitting devices. Journal of Materials Chemistry C: Materials for Optical and Electronic Devices, 2016, 4(23): 5297–5306

[18] Hong N, Qiu X, Deng W, He Z, Li Y. Effect of aggregation behavior and phenolic hydroxyl group content on the performance of lignosulfonate doped PEDOT as a hole extraction layer in polymer solar cells. RSC Advances, 2015, 5(110): 90913–90921

[19] Putnin T, Le H, Bui T, Jakmunee J, Ounnunkad K, Péralta S, Aubert P, Goubard F, Farcase A. Poly(3,4-ethylenedioxythiophene/permethylated β-cyclodextrin) polypseudorotaxane and polyrotaxane: synthesis, characterization and application as hole transporting materials in perovskite solar cells. European Polymer Journal, 2018, 105: 250–256

[20] Fu Y, Qian Y, Zhang A, Lou H, Ouyang X, Yang D, Qiu X. Long-acting ultraviolet-blocking mechanism of lignin: generation and transformation of semiquinone radicals. ACS Sustainable Chemistry & Engineering, 2022, 10(17): 5421–5429

[21] Deng Y, Feng X, Zhou M, Qian Y, Yu H, Qiu X. Investigation of aggregation and assembly of alkali lignin using iodine as a probe. Biomacromolecules, 2011, 12(4): 1116–1125

[22] Zhang A, Wu X, Ouyang X, Lou H, Yang D, Qian Y, Qiu X. Preparation of light-colored lignosulfonate sunscreen microcapsules with strengthened UV-blocking and adhesion performance. ACS Sustainable Chemistry & Engineering, 2022, 10(29): 9381–9388

[23] Wang J, Qian Y, Zhou Y, Yang D, Qiu X. Atomic force microscopy measurement in the lignosulfonate/inorganic silica system: from dispersion mechanism study to product design. Engineering, 2021, 7(8): 1140–1148

[24] Hong N, Qiu X. Structure-adsorption behavior-dispersion property relationship of alkyl chain cross-linked lignosulfonate with different molecular weights. ACS Omega, 2020, 5(10): 4836–4843

[25] Xu Z, Jerrams S, Zheng L, Zhang L, Liu L, Wen S. Green fabrication of high-performance, lignosulfonate-functionalized, and reduced-graphene oxide styrene-butadiene rubber composites. Industrial & Engineering Chemistry Research, 2021, 60(49): 17989–17998

[26] Li Y, Lou H, Wang F, Pang Y, Qiu X. Synergetic effect of perfluorooctanoic acid on the preparation of poly(3,4-ethylenedioxythiophene): lignosulfonate aqueous dispersions with high film conductivity. ChemistrySelect, 2019, 4(38): 11406–11412

[27] Toledano A, Serrano L, Garcia A, Mondragon I, Labidi J. Comparative study of lignin fractionation by ultrafiltration and selective precipitation. Chemical Engineering Journal, 2010, 157(1): 93–99

[28] Joffres B, Lorentz C, Vidalie M, Laurenti D, Quoineaud A A, Charon N, Daudin A, Quignard A, Geantet C. Catalytic hydroconversion of a wheat straw soda lignin: characterization of the products and the lignin residue. Applied Catalysis B: Environmental, 2014, 145(1): 167–176

[29] Ouyang J, Xu Q, Chu C W, Yang Y, Li G, Shinar J. On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) film through solvent treatment. Polymer, 2004, 45(25): 8443–8450

[30] Han D, Yang G, Song J, Niu L, Ivaska A. Morphology of electrodeposited poly(3, 4-ethylenedioxythiophene)/poly(4-styrene sulfonate) films. Journal of Electroanalytical Chemistry, 2007, 602(1): 24–28

[31] Zotti G, Zecchin S, Schiavon G, Louwet F, Groenendaal L, Crispin X, Osikowicz W, Salaneck W, Fahlman M. Electrochemical and XPS studies toward the role of monomeric and polymeric sulfonate counterions in the synthesis, composition, and properties of poly(3,4-ethylenedioxythiophene). Macromolecules, 2003, 36(9): 3337–3344

[32] Wang Z, Zhou J, Zhang Y, Zhu W, Li Y. Accessing highly efficient photothermal conversion with stable open-shell aromatic nitric acid radicals. Angewandte Chemie, 2022, 134(10): e202113653

[33] Li Y, Liu M, Li Y, Yuan K, Xu L, Yu W, Chen R, Qiu X, Yip H L. Poly(3,4-ethylenedioxythiophene):methylnaphthalene sulfonate formaldehyde condensate: the effect of work function and structural homogeneity on hole injection/extraction properties. Advanced Energy Materials, 2017, 7(6): 1601499

[34] Yu W, Xie X, Li Y, Li Y, Chen R, Qiu X, Huang W. Poly(3,4-ethylenedioxythiophene):sulfonated acetone-formaldehyde: preparation, characterization and performance as a hole injection material. Journal of Materials Chemistry C: Materials for Optical and Electronic Devices, 2016, 4(34): 8077–8085

Acknowledgements

The authors would like to acknowledge the financial support of Guangdong Basic and Applied Basic Research Foundation (Grant No. 2019A1515111167), Doctoral Research Initiation Foundation of Dongguan University of Technology (GC300501-075), Rural Science and Technology Commissioner Project of Guangdong Provincial Science and Technology Department (Grant No. KTP20200245), Innovation and Entrepreneurship Projects for College Students (Grant Nos. 202211819092 and 202211819225).

Electronic Supplementary Material

Supplementary material is available in the online version of this article at https://dx.doi.org/10.1007/s11705-022-2272-x and is accessible for authorized users.

版权

2023 Higher Education Press