Experimental study on the physical and mechanical properties of carbonatite rocks under high confining pressure after thermal treatment

Abstract

Oil and gas exploration studies have been increasingly moving deeper into the earth. The rocks in deep and ultra-deep reservoirs are exposed to a complex environment of high temperatures and large geo-stresses. The Tarim oilfield in the Xinjiang Uygur Autonomous Region (Xinjiang for short), China, has achieved a breakthrough in the exploration of deep hydrocarbon reservoirs at a depth of over 9000 m. The mechanical properties of deep rocks are significantly different from those of shallow rocks. In this study, triaxial compression tests were conducted on heat-treated carbonatite rocks to explore the evolution of the mechanical properties of carbonatite rocks under high confining pressure after thermal treatment. The rocks for the tests were collected from reservoirs in the Tarim oilfield, Xinjiang, China. The experiments were performed at confining pressures ranging from atmospheric to 120 MPa and temperatures ranging from 25 to 500℃. The results show that the critical confining pressure of the brittle-ductile transition increases with increasing temperature. Young's modulus is negatively correlated with the temperature and positively correlated with the confining pressure. As the confining pressure increases, the failure mode of the specimens gradually transforms from shear fracture failure into “V”-type failure and finally into bulging failure (multiple shear fractures). With increasing temperature, the failure angle tends to decrease. In addition, an improved version of the Mohr‒Coulomb strength criterion with a temperature-dependent power function was proposed to describe the failure strength of carbonatite rocks after exposure to high temperature and high confining pressure. The surface of the strength envelope of this criterion is temperature dependent, which could reflect the strength evolution of rock under high confining pressures after thermal treatment. Compared with other strength criteria, this criterion is more capable of replicating physical processes.

Keywords

carbonatite / high confining pressure / high temperature / oil and gas reservoirs / ultra-deep rocks

References

[1] Antunes I, Ruivo LCM, Tarelho LAC, Yaremchenko AA, Frade JR. Solid state synthesis of Ca₂Fe₂O₅ by reactive firing of calcite and siderite. Ceram Int. 2022; 48(22): 34025-34032.

[2] Bai BZ, Zeng YJ, Ge HK. Key technologies for the drilling of ultra-deep horizontal well Shunbei 56X. Petrol Dril Tech. 2022; 50(6): 49-55.

[3] Cao W, Tan X, Zhang C, He M. Constitutive model to simulate full deformation and failure process for rocks considering initial compression and residual strength behaviors. Can Geotech J. 2019; 56(4): 649-661.

[4] Chen C, Zhuo YL, Han JW, Wang XJ. Transformation study on the brittle ductile properties of deep rock. Mining Res Dev. 2016; 36(4): 90-93.

[5] Chen HQ, Meng LB. Mechanical characteristics and acoustic emission characteristics of limestone triaxial unloading after high temperature effect. Safety Coal Mines. 2019; 50(4): 58-62.

[6] Chen J, Yao XF, Ma T. Petroleum exploration in China: 2022 review and 2023 outlook. Nat Gas Technol Econ. 2023; 17(2): 1-10.

[7] Chen XD, Feng L, Wang JJ, Guo SS, Xu YF. Mechanical properties and damage evolution rule of tuff at Badantoru hydropower station under triaxial compression after high temperature treatment. J Central South Univ. 2022; 53(7): 2594-2605.

[8] Chen YL, Wang SR, Ni J, Azzam R, Fernández-steeger TM. An experimental study of the mechanical properties of granite after high temperature exposure based on mineral characteristics. Eng Geol. 2017; 220: 234-242.

[9] Deng L, Li X, Wu Y, et al. Influence of cooling speed on the physical and mechanical properties of granite in geothermal-related engineering. Deep Undergr Sci Eng. 2022; 1(1): 40-57.

[10] Fairhurst CE, Hudson JA. Draft ISRM suggested method for the complete stress-strain curve for the intact rock in uniaxial compression. Int J Rock Mech Mining Sci. 1999; 36: 279-289.

[11] Ge S, Shi B, Zhang S, Zhai X, Wu C. Thermal damage and mechanical properties of high temperature sandstone with cyclic heating-cooling treatment. Bull Eng Geol Environ. 2022; 81: 284.

[12] Guo P, Wu S, Zhang G, Chu C. Effects of thermally-induced cracks on acoustic emission characteristics of granite under tensile conditions. Int J Rock Mech Mining Sci. 2021; 144:104820.

[13] Hu X, Shentu J, Xie N, et al. Predicting triaxial compressive strength of high-temperature treated rock using machine learning techniques. J Rock Mech Geotech Eng. 2023; 15(8): 2072-2082.

[14] Hu YF, Hu YQ, Zhao GK, Jin PY, Li C, Zhu XZ. Experimental study on mechanical properties of granite subjected to temperature and stress cycles. Chin J Rock Mech Eng. 2020; 39(4): 705-714.

[15] Huang Z, Zeng W, Gu Q, Wu Y, Zhong W, Zhao K. Investigations of variations in physical and mechanical properties of granite, sandstone, and marble after temperature and acid solution treatments. Constr Build Mater. 2021; 307(8):124943.

[16] Jiang H, Jiang A, Zhang F, Feng Y. Experimental investigation on the seepage characteristics and temperature-permeability (T-P) model of sandstone after different temperature treatments. J Ther Anal Calorim. 2022; 147(23): 13177-13189.

[17] Jiang Y, Zhou L, Zhu Z, Ma L, Chen J, Li Y. Research on dynamic cracking properties of cracked rock mass under the effect of thermal treatment. Theor Appl Fract Mech. 2022; 122:103580.

[18] Kou B, Zhang D, Meng T, et al. Micro and macro evaluation of tensile characteristics of anisotropic rock mass after high temperatures treatment—a case study of Lingshi Gneiss. Geothermics. 2022; 102:102409.

[19] Kumar R, Sharma KG, Varadarajan A. Post-peak response of some metamorphic rocks of India under high confining pressures. Int J Rock Mech Mining Sci. 2010; 47(8): 1357-1362.

[20] Lepakshi R, Venkatarama Reddy BV. Shear strength parameters and Mohr-Coulomb failure envelopes for cement stabilised rammed earth. Constr Build Mater. 2020; 249:118708.

[21] Li X. Finite element analysis of slope stability using a nonlinear failure criterion. Comp Geotech. 2007; 34(3): 127-136.

[22] Liu N, Chen P. A failure envelope proposal based on the analysis of the requirements of nonlinear Mohr-Coulomb criteria. Mech Res Commun. 2023; 129:104086.

[23] Liu S, Xu J. Mechanical properties of Qinling biotite granite after high temperature treatment. Int J Rock Mech Mining Sci. 2014; 71: 188-193.

[24] Liu X, Yuan S, Sieffert Y, Fityus S, Buzzi O. Changes in mineralogy, microstructure, compressive strength and intrinsic permeability of two sedimentary rocks subjected to high-temperature heating. Rock Mech Rock Eng. 2016; 49(8): 2985-2998.

[25] Liu X, Zhang C, Yuan S, Fityus S, Sloan SW, Buzzi O. Effect of high temperature on mineralogy, microstructure, shear stiffness and tensile strength of two Australian mudstones. Rock Mech Rock Eng. 2016; 49(9): 3513-3524.

[26] Luo B, Ye Y, Hu N, Wang W. Investigation of dip effect on uniaxial compressive strength of inclined rock sample by experimental and theoretical models. Rock Mech Rock Eng. 2020; 53(12): 5659-5675.

[27] Ma T, Zhu G, Peng N, Qiu Y, Liu Y, Zou J. Physical-mechanical properties and thermal-induced damage of granite after high-temperature pretreatment. Arab J Geosci. 2021; 14(15): 1449-1461.

[28] Maruvanchery V, Kim E. Effects of a high temperature (500℃) on the fracture processes in calcite-cemented sandstone along bedding-plane orientations. Rock Mech Rock Eng. 2020; 53(2): 955-966.

[29] Meng Q, Liu JF, Pu H, Yu L, Wu J, Wang C. Mechanical properties of limestone after high-temperature treatment under triaxial cyclic loading and unloading conditions. Rock Mech Rock Eng. 2021; 54(12): 6413-6437.

[30] Meng Q, Qian W, Liu J, Zhang M, Lu M, Wu Y. Analysis of triaxial compression deformation and strength characteristics of limestone after high temperature. Arab J Geosci. 2020; 13(4): 153.

[31] Mogi K. On the pressure dependence of strength of rocks and the Coulomb fracture criterion. Tectonophysics. 1974; 21(3): 273-285.

[32] Pan W, Yang DG, Yang L, Xiao YQ, Wang GG, Tang H. Spatio-temporal dynamics and optimal development scale of cotton industry in Xinjiang: spatio-temporal dynamics and optimal development scale of cotton industry in Xinjiang. Chin J Eco Agric. 2011; 19(3): 415-420.

[33] Paterson MS. Experimental deformation and faulting in Wombeyan marble. Geol Soc Am Bull. 1958; 69(4): 465-476.

[34] Peellage WH, Fatahi B, Rasekh H. Assessment of cyclic deformation and critical stress amplitude of jointed rocks via cyclic triaxial testing. J Rock Mech Geotech Eng. 2023; 15(6): 1370-1390.

[35] Peng Z, Zeng Y, Ye Y, Chen X. A statistical damage constitutive model for rock based on modified Mohr-Coulomb strength criterion. Arab J Geosci. 2021; 14(23): 2679.

[36] Qin Y, Tian H, Xu NX, Chen Y. Physical and mechanical properties of granite after high-temperature treatment. Rock Mech Rock Eng. 2020; 53(1): 305-322.

[37] Rutter EH. On the nomenclature of mode of failure transitions in rocks. Tectonophysics. 1986; 122(3-4): 381-387.

[38] Shafiq MU, Ben Mahmud HK, Wang L, Abid K, Gishkori SN. Comparative elemental, mineral and microscopic investigation of sandstone matrix acidizing at HPHT conditions. Petrol Res. 2022; 7(4): 448-458.

[39] Shi X, Jing H, Yin Q, Zhao Z, Han G, Gao Y. Investigation on physical and mechanical properties of bedded sandstone after high-temperature exposure. Bull Eng Geol Environ. 2020; 79: 2591-2606.

[40] Tian H, Kempka T, Yu S, Ziegler M. Mechanical properties of sandstones exposed to high temperature. Rock Mech Rock Eng. 2016; 49(1): 321-327.

[41] Walton G. A new perspective on the brittle-ductile transition of rocks. Rock Mech Rock Eng. 2021; 54(12): 5993-6006.

[42] Walton G, Hedayat A, Kim E, Labrie D. Post-yield strength and dilatancy evolution across the brittle-ductile transition in Indiana limestone. Rock Mech Rock Eng. 2017; 50(7): 1691-1710.

[43] Wang F, Konietzky H. Thermo-mechanical properties of granite at elevated temperatures and numerical simulation of thermal cracking. Rock Mech Rock Eng. 2019; 52(10): 3737-3755.

[44] Wang G, Yang D, Liu S, Fu M, Wang L. Experimental study on the anisotropic mechanical properties of oil shales under real-time high-temperature conditions. Rock Mech Rock Eng. 2021; 54(12): 6565-6583.

[45] Wang P, Yin T, Li X, Konietzky H. Evolution of micro-damage and degradation of macro-mechanical properties of sandstone due to thermal effects. Bull Eng Geol Environ. 2023; 82: 83.

[46] Wang X, Zhao Y, Gao Y, Sun Z, Liu B, Jiang Y. Energy evolution of anthracite considering anisotropy under high confining pressure: an experimental investigation. Rock Mech Rock Eng. 2023; 56(9): 6735-6759.

[47] Wang XL, He XP, Liu XF, Cheng TH, Li RL. Key drilling technologies for complex ultra-deep wells in the Tarim Keshen 9 gas field. Petrol Dril Tech. 2020; 48(1): 15-20.

[48] Wang Z, Zhou H, Heinz K, Li S, Wang T. Physical and mechanical properties of Beishan granite after different high temperature treatments. J Central South Univ. 2022; 29(6): 1957-1972.

[49] Wong LNY, Zhang Y, Wu Z. Rock strengthening or weakening upon heating in the mild temperature range? Eng Geol. 2020; 272:105619.

[50] Wu XH, Cai MF, Ren FH, Sun JL, Guo QF. Evolutions of P-wave velocity and thermal conductivity of granite under different thermal treatments. Chin J Rock Mech Eng. 2022; 41(3): 457-467.

[51] Xi BP, Wu CY, Wang S, et al. Evolution of mechanical properties of granite under thermal shock in water with different cooling temperatures. Rock Soil Mech. 2020; 41(S1): 83-94.

[52] Xie HP, Gao MZ, Fu CX, Lu YQ, Yang MQ. Mechanical behavior of brittle-ductile transition in rocks at different depths. J China Coal Soc. 2021; 46(3): 701-715.

[53] Xu T, Zhou G, Heap MJ, Yang S, Konietzky H, Baud P. The modeling of time-dependent deformation and fracturing of brittle rocks under varying confining and pore pressures. Rock Mech Rock Eng. 2018; 51(10): 3241-3263.

[54] Xu T, Zhou GL, Heap MJ, Zhu WC, Chen CF, Baud P. The influence of temperature on time-dependent deformation and failure in granite: a mesoscale modeling approach. Rock Mech Rock Eng. 2017; 50(9): 2345-2364.

[55] Yang SQ, Huang YH, Wen S. Experimental study of mechanical behavior of sandstone with two non-coplanar fissures after high temperature heating. Chin J Rock Mech Eng. 2015; 34(3): 440-451.

[56] Yang SQ, Tian WL, Dong JP. Experimental study on failure mechanical properties of granite with two grain sizes after thermal treatment. Chin J Rock Mech Eng. 2021; 43(2): 281-289.

[57] Yang SQ, Tian WL, Elsworth D, Wang JG, Fan LF. An experimental study of effect of high temperature on the permeability evolution and failure response of granite under triaxial compression. Rock Mech Rock Eng. 2019; 53(10): 4403-4427.

[58] Yang SQ, Tian WL, Elsworth D, Wang JG, Fan LF. An experimental study of effect of high temperature on the permeability evolution and failure response of granite under triaxial compression. Rock Mech Rock Eng. 2020; 53(10): 4403-4427.

[59] Yin W, Feng Z, Zhao Y. Effect of grain size on the mechanical behaviour of granite under high temperature and triaxial stresses. Rock Mech Rock Eng. 2021; 54(2): 745-758.

[60] Yu L, Lyu C, Wang M, Xu T. Three-dimensional upper bound limit analysis of a deep soil-tunnel subjected to pore pressure based on the nonlinear Mohr-Coulomb criterion. Comp Geotech. 2019; 112: 293-301.

[61] Zhang W, Sun Q, Hao S, Geng J, Lv C. Experimental study on the variation of physical and mechanical properties of rock after high temperature treatment. Appl Ther Eng. 2016; 98: 1297-1304.

[62] Zhao F, Shi Z, Sun Q. Fracture mechanics behavior of jointed granite exposed to high temperatures. Rock Mech Rock Eng. 2021; 54(5): 2183-2196.

[63] Zhu J, Qi T, Li J, Cheng Z, Zhang Y. The effects of high temperature on crack propagation and failure characteristics of sandstone. Rock Mech Rock Eng. 2023; 56(8): 5753-5779.

[64] Zhu Z, Tian H, Jiang G, Cheng W. Effects of high temperature on the mechanical properties of Chinese marble. Rock Mech Rock Eng. 2018; 51(6): 1937-1942.

RIGHTS & PERMISSIONS

2024 The Authors. Deep Underground Science and Engineering published by John Wiley & Sons Australia, Ltd on behalf of China University of Mining and Technology.