A case study on the stability of a big underground powerhouse cavern cut by an interlayer shear zone in the China Baihetan hydropower plant

Abstract

The big underground powerhouse cavern of the China Baihetan hydropower plant is 438 m long, 34 m wide, and 88.7 m high. It is cut by a weak interlayer shear zone and its high sidewall poses a huge stability problem. This paper reports our successful solution of this problem through numerical simulations and a replacement-tunnel scheme in the detailed design stage and close site monitoring in the excavation stage. Particularly, in the detail design stage, mechanical parameters of the shear zone were carefully determined through laboratory experiments and site tests. Then, deformation of the surrounding rocks and the shear zone under high in situ stress conditions was predicted using 3 Dimensional Distinct Element Code (3DEC). Subsequently, a replacement-tunnel scheme was proposed for the treatment on the shear zone to prevent severe unloading relaxation of surrounding rocks. In the construction period, excavation responses were closely monitored on deformations of surrounding rocks and the shear zone. The effect of local cracking in the replacement tunnels on sidewall stability was evaluated using the strength reduction method. These monitoring results were compared with the predicted numerical simulation in the detailed design stage. It is found that the shear zone greatly modified the deformation mode of the cavern surrounding rocks. Without any treatment, rock mass deformation on the downstream sidewall was larger than 125 mm and the shearing deformation of the shear zone was 60–70 mm. These preset replacement tunnels can reduce not only the unloading and relaxation of rock masses but also the maximum shearing deformation of the shear zone by 10–20 mm. The predictions by numerical simulation were in good agreement with the monitoring results. The proposed tunnel-replacement scheme can not only restrain the shear zone deformation but also enhance the safety of surrounding rocks and concrete tunnels. This design procedure offers a good reference for interaction between a big underground cavern and a weak layer zone in the future.

Keywords

3DEC / control measures / deformation / interlayer shear zone / underground powerhouse cavern

References

[1] Bakun-Mazor D, Hatzor YH, Dershowitz WS. Modeling mechanical layering effects on stability of underground openings in jointed sedimentary rocks. Int J Rock Mech Min Sci. 2009; 46(2): 262-271.

[2] Bellapu HVS, Sinha RK, Naik SR. Estimation of deformation modulus of rock mass for an underground cavern based on back analysis. In: Verma AK, Mohamad ET, Bhatawdekar AM, et al., eds. Proceedings of Geotechnical Challenges in Mining, Tunneling and Underground Infrastructures. ICGMTU; 2021: 393-403.

[3] Du S, Zhang C, Mao D, Ruan B, Lu X. A case study of the failure mechanism analysis and support design of a tailrace tunnel in a weak fracture zone containing expansive minerals. Bull Eng Geol Environ. 2022; 81: 495-522.

[4] Hatzor YH, Feng XT, Li S, Yagoda-Biran G, Jiang Q, Hu L. Tunnel reinforcement in columnar jointed basalts: the role of rock mass anisotropy. Tunnel Undergr Space Technol. 2015; 46: 1-11.

[5] Høien AH, Nilsen B, Olsson R. Main aspects of deformation and rock support in Norwegian road tunnels. Tunnel Undergr Space Technol. 2019; 86: 262-278.

[6] Itasca Consulting Group Inc. 3DEC (3 Dimensional Distinct Element Code) User's Manual Version 4.2. Itasca Consulting Group Inc.; 2010.

[7] Jeon S, Kim J, Seo Y, Hong C. Effect of a fault and weak plane on the stability of a tunnel in rock–a scaled model test and numerical analysis. Int J Rock Mech Min Sci. 2004; 41(Supp 1): 658-663.

[8] Jiang Q, Feng X, Chen J, Huang K, Jiang Y. Estimating in-situ rock stress from spalling veins: a case study. Eng Geol. 2013; 152: 38-47.

[9] Jiang Q, Feng X, Hatzor YH, Hao X, Li S. Mechanical anisotropy of columnar jointed basalts: an example from the Baihetan hydropower station, China. Eng Geol. 2014; 175: 35-45.

[10] Jiang YL, Xu JQ, Meng GT, Zhu HC, Li H, Wang YF. Numerical evaluation of cavern layout design for the Baihetan hydropower project in China. Proceeding of 44th US Rock Mechanics Symp. and 5th U.S.-Canada Rock Mechanics Symp. ARMA; 2010.

[11] Kadir Y, Haluk A, Evrim S. Displacement monitoring, displacement verification and stability assessment of the critical sections of the Konak tunnel, Lzmir, Turkey. Tunnel Undergr Space Technol. 2020; 101: 1-27.

[12] Liang Z, Gong B, Li W. Instability analysis of a deep tunnel under triaxial loads using a three dimensional numerical method with strength reduction method. Tunnel Undergr Space Technol. 2019; 86: 51-62.

[13] Mao DW, Bjørn N. Numerical analysis of effects of weakness zones on tunnel stability—2d versus 3d. In: Zhou Y, Cai J, Sterling R, eds. Proceedings of the 13th World Conference of ACUUS: Advances in Underground Space Development. ACUUS; 2013:388-398.

[14] Meng GT, Detournay C, Cundall PA. Continuum/discrete numerical simulation of columnar basalt in large-scale underground excavations. Proceedings of 50th U.S. Rock Mechanics/Geomechanics Symposium. ARMA; 2016.

[15] Meng GT, Fan YL, Jiang YL, He W, Pan YB, Li Y. Key rock mechanical problems and measures for huge caverns of Baihetan hydropower plant. Chin J Rock Mech Eng. 2016; 35(12): 2549-2560.

[16] Meng G, Detournay C, Cundall P. Formulation and application of a constitutive model for multi-jointed material to rock mass engineering. Int J Geomech. 2020; 20(6): 1-12.

[17] Rahimi B, Sharifzadeh M, Feng XT. A comprehensive underground excavation design (CUED) methodology for geotechnical engineering design of deep underground mining and tunneling. Int J Rock Mech Min Sci. 2021; 143:104684.

[18] Schubert W, Fasching A, Goricki A. Tunnelling in fault zones—state of the art. Tunnel Undergr Space Technol. 2006; 21: 376-377.

[19] Singh B, Goel RK. Engineering Rock Mass Classification. Tunneling foundations, and landslide; 2011: 7-11.

[20] Wang Y, Jing H, Su H, Xie J. Effect of a fault fracture zone on the stability of tunnel-surrounding rock. Int J Geomech. 2017; 17(6): 1-20.

[21] Whittaker BN, Frith RC. Tunneling: Design, Stability and Construction. Elsevier Science Publishers Ltd; 1990: 7-12.

RIGHTS & PERMISSIONS

2024 The Authors. Deep Underground Science and Engineering published by John Wiley & Sons Australia, Ltd on behalf of China University of Mining and Technology.