CuO foam with in-situ grown polyaniline for high sensitivity room temperature NO₂ gas sensors

Abstract

The rapid and accurate detection of NO₂ gas at ppm level is of great value in human health and environmental protection. However, the most widely used metal-oxide semiconductor (MOS)-based NO₂ sensors usually require high operating temperatures (> 200 °C) to perform sensing functions. The preparation of these sensors possessing excellent sensing performance at room temperature (RT) remains a challenge. In this paper, copper oxide (CuO)-polyaniline (PANI) composites were prepared by heat treatment of copper foam and in situ growth of PANI. These composites exhibited a response value of 7.63 to 100 ppm NO₂ at RT, which was 4.8 times higher than that of pure PANI. Moreover, the response time (3 s) was dramatically shortened compared with PANI (27 s). In addition, the prepared sensors demonstrated excellent stability and high NO₂ selectivity. The excellent NO₂ sensing properties of CuO-PANI were attributed to the p-p heterojunction between CuO and PANI and the large number of oxygen vacancies. This research contributes to a practical and cost-effective approach for the development of high-performance NO₂ sensors operating at RT and offers potential applications for air quality testing.

Keywords

CuO-PANI / NO₂ sensor / polyaniline / room temperature / p-p heterojunction

References

[1] Bai H,Feng C.A room-temperature chemiresistive NO₂ sensor based on one-step synthesized SnO₂ nanospheres functionalized with Pd nanoparticles and rGO nanosheets.Appl Surf Sci2022;575:151698

[2] Amu-Darko JNO,Gong Q.Highly sensitive In₂O₃/PANI nanosheets gas sensor for NO₂ detection.J Environ Chem Eng2023;11:109211

[3] Inaba M,Kono M.Effect of mixing ratio on NO₂ gas sensor response with SnO₂-decorated carbon nanotube channels fabricated by one-step dielectrophoretic assembly.Sensor Actuat B Chem2021;344:130257

[4] Chu SY,Yeh TH,Lee HY.Sensing mechanism and characterization of NO₂ gas sensors using gold-black NP-decorated Ga₂O₃ nanorod sensing membranes.ACS Sens2024;9:118-25

[5] Yuan Z,Duan Z.Ag₂Te nanowires for humidity-resistant trace-level NO₂ detection at room temperature.Sensor Actuat B Chem2022;363:131790

[6] Sihag S,Rani S.Low ppm NO₂ detection through advanced ultrasensitive copper oxide gas sensor.Discov Nano2024;19:107 PMCID:PMC11557803

[7] Bonyani M,Janghorban K,Kim HW.Enhanced NO₂ gas sensing properties of ZnO-PANI composite nanofibers.Ceram Int2023;49:1238-49

[8] Feng S,Li Q.Review on smart gas sensing technology.Sensors2019;19:3760 PMCID:PMC6749323

[9] Xin C,Xing Y.An in situ exsolution strategy to prepare metallic Sn modified SnO₂ with oxygen vacancies for ppb-level NO₂ detection.Sensor Actuat B Chem2024;419:136232

[10] Jiakun W.Research into normal temperature gas-sensitive characteristics of polyaniline material.Sensor Actuat B Chem1993;12:11-3

[11] Byoun Y,Choi S.Strategy for sensitive and selective NO₂ detection at low temperatures utilizing p-type TeO₂ nanowire-based sensors by formation of discrete n-type ZnO nanoclusters.Ceram Int2020;46:19365-74

[12] Li Y,Yan X.3D nanostructured Cu_xO modified copper foam as a binder-free electrode for all-solid-state supercapacitor.Ceram Int2021;47:31138-48

[13] Nakate UT,Na S,Suh E.Fabrication and enhanced carbon monoxide gas sensing performance of p-CuO/n-TiO₂ heterojunction device.Colloid Surface A2021;612:125962

[14] Hmeed AAA.NO₂ gas sensor properties of In₂O₃-CuO nanocomposite thin films prepared by chemical spray pyrolysis.IOP Conf Ser Mater Sci Eng2021;1095:012008

[15] Wang N,Gong X.Highly sensitive and selective NO₂ gas sensor fabricated from Cu₂O-CuO microflowers.Sensor Actuat B Chem2022;362:131803

[16] Ambedkar AK,Vikal S.Ocimum sanctum leaf extract-assisted green synthesis of Pd-doped CuO nanoparticles for highly sensitive and selective NO₂ gas sensors.ACS Omega2023;8:29663-73 PMCID:PMC10433468

[17] Hsueh T,Fang S.A vertical CuO-NWS/MEMS NO₂ gas sensor that is produced by sputtering.Sensor Actuat B Chem2022;355:131260

[18] Govind A,Mohan MK,Harish S.Highly sensitive near room temperature operable NO₂ gas-sensor for enhanced selectivity via nanoporous CuO@ZnO heterostructures.J Environ Chem Eng2023;11:110056

[19] Wang Z,Li J.Room-temperature NH₃ sensor based on CoFe₂O₄/PANI composite with porous structure.Mater Res Bull2024;175:112774

[20] Zhang B,Shi X.Polyaniline/CuO nanoparticle composites for use in selective H₂S sensors.ACS Appl Nano Mater2023;6:18413-25

[21] Wang Y,Han Y.Sensors based on conductive polymers and their composites: a review.Polym Int2020;69:7-17

[22] Das M.Polypyrrole and associated hybrid nanocomposites as chemiresistive gas sensors: a comprehensive review.Mat Sci Semicon Proc2021;121:105332

[23] Liu A,Jiang L.The gas sensor utilizing polyaniline/MoS₂ nanosheets/SnO₂ nanotubes for the room temperature detection of ammonia.Sensor Actuat B Chem2021;332:129444

[24] Kumawat M,Verros GD.PANI-based hydrogen sulfide gas sensors.Coatings2022;12:186

[25] Esmaeili C,Regmi C.Preparation and characterisation of NH₃ gas sensor based on PANI/Fe-doped CeO₂ nanocomposite.Heliyon2024;10:e34801 PMCID:PMC11336279

[26] Xu H,Li W.Low-working-temperature, fast-response-speed NO₂ sensor with nanoporous-SnO₂/polyaniline double-layered film.Sensor Actuat B Chem2016;224:654-60

[27] Nguyet TT,Nguyet QTM.Novel synthesis of a PANI/ZnO nanohybrid for enhanced NO₂ gas sensing performance at low temperatures.J Electron Mater2023;52:304-19

[28] Patowary B, Laskar S, Narzary R, Mondal A. Synthesis, characterization, and study of NO₂ gas sensing behavior of CSA doped PANi-Ta₂O₅ nanocomposite.IEEE Sensors J2020;20:3429-41

[29] Jian Y,Zhao Z.Gas sensors based on chemi-resistive hybrid functional nanomaterials.Nanomicro Lett2020;12:71 PMCID:PMC7770957

[30] Ghaleghafi E.Reversible room temperature ammonia sensor based on the synthesized MoS₂/PANI nanocomposites.Phys Scr2023;98:075801

[31] Han D,Wang Y.Machine-learning-assisted n-GaN-Au/PANI gas sensor array for intelligent and ultra-accurate ammonia recognition.Chem Eng J2024;495:153705

[32] Li F,Li J.Fabrication of ZnO-SnO₂ heterojunction inverse opal photonic balls for chemiresistive acetone sensing.Sensor Actuat B Chem2024;400:134887

[33] Li F,Li J.Fabrication of Pt cluster-loaded In₂O₃ inverse opal photonic crystals for fast and highly sensitive ethanol sensing.J Mater Chem C2023;11:1899-907

[34] Sui C,Li Y.Pd@Pt core-shell nanocrystal-decorated ZnO nanosheets for ppt-level NO₂ detection.ACS Sens2024;9:1967-77

[35] Li P,Feng Y,Cheng D.Synergistic sensitization effects of single-atom gold and cerium dopants on mesoporous SnO₂ nanospheres for enhanced volatile sulfur compound sensing.Mater Horiz2024;11:3038-47

[36] Liu W,Li S.Pd/In₂O₃-based bilayer H₂ sensor with high resistance to silicone toxicity and ultra-fast response.Int J Hydrogen Energy2023;48:5743-53

[37] Chen Y,Bai Y.Room-temperature NH₃-sensor: SnO₂@PANI core-shell hollow spheres.Sensor Actuat B Chem2024;412:135784

[38] Liu F,Chen C.Dual enhancement in response and anti-humidity properties of a triethylamine sensor based on trimethoxypropylsilane self-assembled functionalized In₂O₃.Sensor Actuat B Chem2024;417:136120

[39] Qiao L,Zhang J.A highly responsive, moisture resistant diabetes diagnostic gas sensor with Pt-loaded porous GO/ZnO.Sensor Actuat B Chem2024;418:136275

[40] Haldar T,Yang RX.Exploring MOF-derived CuO/rGO heterostructures for highly efficient room temperature CO₂ sensors.ACS Sens2024;9:5856-65 PMCID:PMC11590104

[41] Li S,Zhang C.Controllable synthesis of heterostructured CuO–ZnO microspheres for NO₂ gas sensors.Sensor Actuat B Chem2024;417:136179

[42] Shi Z,Chang S.Synthesis and characterization of an oxygen-controlled CuO/SnO₂ sensor for NO₂ detection.Sensor Actuat B Chem2024;421:136517

[43] Umar A,Algadi H.Enhanced NO₂ gas sensor device based on supramolecularly assembled polyaniline/silver oxide/graphene oxide composites.Ceram Int2021;47:25696-707

[44] He W,Xiong Y.Bilayer polyaniline-WO₃ thin-film sensors sensitive to NO₂.ACS Omega2020;5:9744-51 PMCID:PMC7203703

[45] Jain S,Shah A.Development of Ni doped ZnO/polyaniline nanocomposites as high response room temperature NO₂ sensor.Mater Sci Eng B2019;247:114381

[46] Zhang Y,Liu W,Zhan Z.Design of SnO₂-based CH₄ sensors with reactive anti-poisoning layers: excellent stability and high resistance to hexamethyldisiloxane.J Mater Sci2023;58:2140-55

[47] Zhang S,Xiao R.Size-dependent response of hydrothermally grown SnO₂ for a high-performance NO₂ sensor and the impact of oxygen.ACS Sens2024;9:195-205

[48] Guo F,Zhang Z.A room-temperature NO₂ sensor based on Ti₃C₂T_X MXene modified with sphere-like CuO.Sensor Actuat B Chem2023;375:132885

[49] Köglmaier M,Kronseder M.Characterization of the interaction of nitric oxide/nitrogen dioxide with the polymer surfaces in ECMO devices.J Polym Res2024;31:4109

[50] Jin Z,Zhao J.Anchoring Ni atomic clusters on yolk-shell In₂O₃ microspheres for highly sensitive, ultra-rapid responding/recovering ppb-level NO₂ detections.Chem Eng J2024;499:156531

[51] Xin Y,Gao T.Photocatalytic NO removal over defective Bi/BiOBr nanoflowers: the inhibition of toxic NO₂ intermediate via high humidity.Appl Catal B Environ2023;324:122238

[52] Hadjiivanov KI.Identification of neutral and charged N_xO_y surface species by IR spectroscopy.Catal Rev2000;42:71-144

[53] Chen Q,Chen M,Li X.In situ construction of biocompatible Z-scheme α-Bi₂O₃/CuBi₂O₄ heterojunction for NO removal under visible light.Appl Catal B Environ2020;272:119008

[54] Sivachandiran L,Rousseau A.NO₂ adsorption mechanism on TiO₂: an in-situ transmission infrared spectroscopy study.Appl Catal B Environ2016;198:411-9

[55] Suh JM,Shim YS.p-p Heterojunction of nickel oxide-decorated cobalt oxide nanorods for enhanced sensitivity and selectivity toward volatile organic compounds.ACS Appl Mater Interfaces2018;10:1050-8

[56] Li R,Wang Y.Unraveling the effect of oxygen vacancy on WO₃ surface for efficient NO₂ detection at low temperature.ACS Appl Mater Interfaces2024;16:51738-47

[57] Yan X,Yang Y.NO₂ gas sensing with polyaniline nanofibers synthesized by a facile aqueous/organic interfacial polymerization.Sensor Actuat B Chem2007;123:107-13

[58] Huang H,Chow CL.Low‐temperature growth of SnO₂ nanorod arrays and tunable n–p–n sensing response of a ZnO/SnO₂ heterojunction for exclusive hydrogen sensors.Adv Funct Materials2011;21:2680-6