Active steering control strategy for articulated vehicles<FootNote> Project supported by the Program for Changjiang Scholars and Innovative Research Team in University, China (No. IRT0626) </FootNote>

Abstract

To improve maneuverability and stability of articulated vehicles, we design an active steering controller, including tractor and trailer controllers, based on linear quadratic regulator (LQR) theory. First, a three-degree-of-freedom (3-DOF) model of the tractor-trailer with steered trailer axles is built. The simulated annealing particle swarm optimization (SAPSO) algorithm is applied to identify the key parameters of the model under specified vehicle speed and steering wheel angle. Thus, the key parameters of the simplified model can be obtained according to the vehicle conditions using an online look-up table and interpolation. Simulation results show that vehicle parameter outputs of the simplified model and TruckSim agree well, thus providing the ideal reference yaw rate for the controller. Then the active steering controller of the tractor and trailer based on LQR is designed to follow the desired yaw rate and minimize their side-slip angle of the center of gravity (CG) at the same time. Finally, simulation tests at both low speed and high speed are conducted based on the TruckSim-Simulink program. The results show significant effects on the active steering controller on improving maneuverability at low speed and lateral stability at high speed for the articulated vehicle. The control strategy is applicable for steering not only along gentle curves but also along sharp curves.

Keywords

Articulated vehicle / Sharp curve / Lateral stability / Linear quadratic regulator (LQR)

References

[1] Cheng, C.Z., 2009. Enhancing Safety of Actively-Steered Articulated Vehicles. PhD Thesis, University of Cambridge, Cambridge, UK.

[2] Cheng, C.Z., Cebon, D., 2008. Improving roll stability of articulated heavy vehicles using active semi-trailer steering. Int. J. Veh. Mech. Mob., 46(S1):373–388. http://dx.doi.org/10.1080/00423110801958576

[3] El-Gindy, M., Mrad, N., Tong, X., 2001. Sensitivity of rearward amplification control of a truck/full trailer to tyre cornering stiffness variations. Proc. Inst. Mech. Eng. Part D, 215(5):579–588. http://dx.doi.org/10.1243/0954407011528176

[4] Gao, Y., Xie, S.L., 2004. Particle swarm optimization algorithms based on simulated annealing. Comput. Eng. Appl., 1:47–50 (in Chinese).

[5] Gong, C., Wang, Z.L., 2014. MATLAB Optimization Calculation (3rd Ed.). Publishing House of Electronics Industry, Beijing, China, p.270–312 (in Chinese).

[6] Hac, A., Fulk, D., Chen, H., 2008. Stability and control considerations of vehicle-trailer combination, . SAE Int. J. Passeng Cars Mech. Syst., 1(1):925–937. http://dx.doi.org/10.4271/2008-01-1228

[7] Hata, N., Hasegawa, S., Takahashi, S., , 1989. A Control Method for 4WS Truck to Suppress Excursion of a Body Rear Overhang. SAE Technical Paper 892521, p.754–760. http://dx.doi.org/10.4271/892521

[8] He, Y., Islam, M., Webster, T., 2010. An integrated design method for articulated heavy vehicles with active trailer steering systems. SAE Int. J. Passeng. Cars Mech. Syst., 3(1):158–174. http://dx.doi.org/10.4271/2010-01-0092

[9] Islam, M., He, Y., 2011. An Optimal Preview Controller for Active Trailer Steering Systems of Articulated Heavy Vehicles. SAE Technical Paper<Date>2011-01-0983</Date>. http://dx.doi.org/10.4271/2011-01-0983

[10] Jujnovich, B., Cebon, D., 2002. Comparative performance of semi-trailer steering systems. Proc. 7th Int. Symp. on Heavy Vehicle Weights & Dimensions, p.1–20.

[11] Jujnovich, B., Cebon, D., 2013. Path-following steering control for articulated vehicles. J. Dyn. Syst. Meas. Contr., 135(3):031006. http://dx.doi.org/10.1115/1.4023396

[12] Kamnik, R., Boettiger, F., Hunt, K., 2003. Roll dynamics and lateral load transfer estimation in articulated heavy freight vehicles. Proc. Inst. Mech. Eng. Part D, 217(11):985–997. http://dx.doi.org/10.1243/095440703770383884

[13] Kusters, L.J.J., 1995. Increasing rollover safety of commercial vehicles by application of electronic systems. In: Pauwelussen, J.P., Pacejka, H.B. (Eds.), Smart Vehicles. Swets & Zeitlinger, the Netherlands, p.362–378.

[14] LeBlanc, P., El-Gindy, M., Woodrooffe, J., 1989. Self-Steering Axles: Theory and Practice. SAE Technical Paper 891633, p.156–170. http://dx.doi.org/10.4271/891633

[15] Notsuet, I., Takahashi, S., Watanabe, Y., 1991. Investigation into Turning Behaviour of Semi-trailer with Additional Trailer-Wheel Steering – A Control Method for Trailer-Wheel Steering to Minimize Trailer Rear – Overhang Swing in Short Turns. SAE Technical Paper 912570, p.1007–1013.

[16] Palkovics, L., El-Gindy, M., 1996. Examination of different control strategies of heavy-vehicle performance. J. Dyn. Syst. Meas. Contr., 118(3):489–498. http://dx.doi.org/10.1115/1.2801172

[17] Rangavajhula, K., Tsao, H.S.J., 2007. Active trailer steering control of an articulated system with a tractor and three full trailers for tractor-track following. Int. J. Heavy Veh. Syst., 14(3):271–293. http://dx.doi.org/10.1504/IJHVS.2007.015604

[18] Rangavajhula, K., Tsao, H.S.J., 2008. Command steering of trailers and command-steering-based optimal control of an articulated system for tractor-track following. Proc. Inst. Mech. Eng. Part D, 222(6):935–954. http://dx.doi.org/10.1243/09544070JAUTO501

[19] Roebuck, R., Odhams, A., Tagesson, K., , 2013. Implementation of trailer steering control on a multi-unit vehicle at high speeds. J. Dyn. Syst. Meas. Contr., 136(2): 021016. http://dx.doi.org/10.1115/1.4025815

[20] Truck and Bus Powertrain Steering Committee, 1993. A Test for Evaluating the Rearward Amplification of Multiarticulated Vehicles. SAE Standard J2179.

RIGHTS & PERMISSIONS

2016 Zhejiang University and Springer-Verlag Berlin Heidelberg