2025-12-10 2025, Volume 10 Issue 4

  • Select all
  • research-article
    Marcela Bucekova, Jana Godocikova, Stefan Gal, Ludovit Morocz, Daniel Mikuska, Lubomir Svec, Juraj Majtan
    2025, 10 (4): 803-818 . https://doi.org/10.3934/agrfood.2025042

    Honey crystallization is a natural process that limits its handling and processing while reducing consumer acceptance. Conventional thermal treatments used to prevent crystallization can negatively impact honey's bioactive properties, particularly its antibacterial activity. This study investigated ultrasound (US) as a non-thermal alternative to thermal processing for liquefying crystallized honey and preventing crystallization in liquid honey samples. Two crystallized honey samples were subjected to US treatment at frequencies of 20, 25, 28, 33, and 40 kHz with 20% and 30% power to evaluate liquefaction efficiency. Five fresh liquid honey samples were treated with US at optimal frequencies (28 and 40 kHz) or conventional heat treatment (70 ℃ for 10 min) and monitored for crystallization over 20 weeks of storage at 4 ℃. Antibacterial activity against Staphylococcus aureus was assessed using minimum inhibitory concentration (MIC) assays. US treatment effectively liquefied crystallized honey, with optimal frequencies varying by botanical origin. US treatment at 40 kHz was most effective in preventing crystallization during storage, with none of the treated samples fully crystallizing after 20 weeks, compared to complete crystallization in heat-treated samples. Antibacterial activity remained stable in most US-treated samples, with multifloral honeys showing particular resistance to activity changes, likely due to protective polyphenol content. These findings demonstrate that US processing represents a promising non-thermal alternative to conventional heat treatment, effectively maintaining honey in liquid state while generally preserving its antibacterial properties. The botanical origin of honey significantly influences optimal US treatment parameters, suggesting the need for customized processing approaches.

  • research-article
    Qamar Sarfaraz, Rajesh Sharma, Gerson Laerson Drescher, Mohsin Zafar, Muhammad Izhar Shafi, Geoffrey Christie Anderson, Leandro Souza da Silva, Zakaria M. Solaiman
    2025, 10 (4): 819-838 . https://doi.org/10.3934/agrfood.2025043

    Reductions in soil organic matter (SOM) affect soil quality and fertility in tropical agricultural soils. Due to its recalcitrant nature, biochar persists longer in soils. A greenhouse experiment was conducted to assess the effect of biochar, locally produced from animal manures (poultry litter, swine, and cattle manures) and crop residues (rice, soybean, and corn straws) on soil pH, aluminum (Al) concentration, and yields of wheat, as well as its residual effects on soybean under a no-tillage planting system. Undisturbed soil was collected at a 25 cm depth in polyvinyl tubes (PVC) from a long-term no-tillage site. The experiment included six biochar types and two rates of each biochar type, with and without N fertilizer, leading to 26 treatment combinations including 2 controls. Two control treatments were used, one without biochar and N (control –N-B) and the other without biochar but with N (control +N-B). The treatments were replicated three times and laid out in a complete randomized design (CRD). Biochar was applied at rates of 10 Mg ha–1 (33.5 g column–1) and 20 Mg ha–1 (67 g column–1) and ammonium sulfate at 0 and 110 kg ha–1 (1.6 g ammonium sulfate column–1). The study showed that applying N along with biochar increased wheat and soybean growth and growth attributes. Additionally, applying biochar influenced the soil pH and exchangeable Al effectively in the topsoil. However, its impact decreased with increasing depth under the no-tillage planting system. These findings suggest that biochar, especially when applied with nitrogen fertilizer could improve plant performance and ameliorate soil acidity in no-tillage planting systems due to its recalcitrant nature.

  • research-article
    Siti Nurhidayah, Bambang Sapta Purwoko, Iswari Saraswati Dewi, Willy Bayuardi Suwarno, Iskandar Lubis, Darda Efendi
    2025, 10 (4): 839-861 . https://doi.org/10.3934/agrfood.2025044

    Rice is a staple food for Asian people. Green super rice (GSR) features improved quantity and yield quality, resistance to major pests and diseases, and adaptability to planting in less favorable conditions. This study aimed to assess the agronomic performance of doubled haploid (DH) lines in advanced yield trials, select the best lines for multi-location yield trials, and evaluate resistance to brown planthopper (BPH) using the multi-trait genotype-ideotype distance index (MGIDI). The advanced yield trials were conducted at three locations in Indonesia-Indramayu (West Java), Bogor (West Java), and Malang (East Java)-from August 2022 to January 2023. Evaluation of the DH lines to brown planthopper was conducted in the greenhouse of the Center for Standard Instruments Testing of Rice, West Java, Indonesia, from October 2023 to January 2024. The materials used were 27 DH GSR lines and 3 check varieties (Inpari IR Nutri Zinc, Inpari 42 Agritan GSR, and Inpari 18) for advanced yield trials, and 20 DH GSR lines, two check varieties (Inpari 42 Agritan GSR and Inpari 18), two resistant checks (PTB33 and IR74), and a susceptible check (TN1) for evaluation of BPH resistance. The experiment used a randomized complete block design with three replications. The results showed that the genotype × environment interaction had a significant effect on all agronomic traits. Nine DH lines (SN11, 14, 32, 40, 51, 57, 58, 59, and 60) had high yield, and among those, six (SN 40, 51, 57, 58, 59, and 60) had better resistance to BPH based on MGIDI selection. SN11 has a yield of 5.04 ton·ha−1 and is moderately resistant to BPH biotype 1. Lines SN57, 58, 59, and 60 have yields ranging from 5.29 to 5.67 ton·ha−1 and are resistant to all tested BPH. SN51 has a yield of 5.07 ton·ha−1 and is moderately resistant to all tested BPH. Those six lines are stable according to Kang’s method and can be further evaluated to determine their adaptations across multiple environments.

  • research-article
    Rimsha Anwar, Allah Rakha, Imran Pasha, Muhammad Asghar
    2025, 10 (4): 862-884 . https://doi.org/10.3934/agrfood.2025045

    Medicinal plants have long been a cornerstone of traditional and modern medicines. Their extracts are recognized for their significant safety and therapeutic potential. Caralluma fimbriata, a member of the Apocynaceae family, has a historical application in the treatment of diabetes, oxidative stress, and metabolic disorders. We focused on the nutritional and mineral analysis of C. fimbriata and assessed four extraction techniques, Maceration (MC), Soxhlet extraction (SOX), microwave-assisted extraction (MAE), and ultrasonic-assisted extraction (UAE), to evaluate their impact on extraction yield and antioxidant potential. The study revealed that the UAE exhibited a significantly higher extraction efficiency (21.99%) compared to MAE (15.29%), SOX (14.01%), and MC (11.72%). The UAE extraction method revealed the highest total phenolic content (37.72 ± 1.75 mg/g) and flavonoid content (18.47 ± 1.59 mg/g) compared to all other methods. The enhanced antioxidant activity was corroborated by the findings, as demonstrated through the 2,2-diphenyl-1-picrylhydrazyl radical scavenging assay (91.29%) and the ferric-reducing antioxidant power (788.32 μmol FeSO4/g). FTIR spectroscopy confirmed that the core chemical composition of extracts was unchanged across all extraction techniques. The findings indicated that the UAE is an effective and sustainable method for optimizing phytochemical extraction from C. fimbriata, highlighting its potential as a source of natural antioxidants for the nutraceutical sector and functional foods.

  • research-article
    Antonio Comparetti, Adriano Fagiolini, Spyros Fountas, Vincenzo Cascio
    2025, 10 (4): 885-916 . https://doi.org/10.3934/agrfood.2025046

    In this review, a widely implemented method was followed. Therefore, the literature review process was divided into three phases: Planning, execution, and result analysis. Precision agriculture is a management strategy that takes into account the temporal and spatial variability to improve sustainability of agricultural production. The precision agriculture cycle is constituted by three stages: Geo-referenced measurement of within-field parameters; analysis and interpretation of geo-referenced data for mapping within-field parameters; and spatially variable rate crop input application. The instruments and techniques needed for implementing precision agriculture are Global Navigation Satellite Systems (GNSS), proximal and/or remote sensing, spatially-based software, soil-crop simulation models, controllers for spatially variable rate crop input application, guidance systems of agricultural machines, and field robots. During the precision agriculture cycle, instead of unmanned tractors or together with them, it is possible to use field robots for seeding and planting, plant protection, fruit harvest, and other crop operations. As a consequence of intensification, mechanisation, and automation, agricultural production has significantly increased over time. In both traditional and precision agriculture, the automation of crop operations is possible through the employment of robots, as they can accomplish repetitive labour tasks by keeping high precision, as well as saving time and energy during the working day. A total of 20 case studies of implementation of robots in agriculture and forestry were counted: Optimised coverage for arable farming; weed control; high precision seeding; crop yield estimation; precision irrigation; tree fruit production; vehicle formation control; date palm tree spraying; plant probing; cucumber harvesting; cucumber leaf removal; rose harvesting; strawberry harvesting; pot handling in nurseries and greenhouses; precision forestry; semi-automation of forwarder crane; livestock breeding and nurturing; livestock exploitation; livestock harvesting, slaughtering and processing; and aerial-based precision agriculture. In this review, Unmanned Ground Vehicles (UGVs) were classified according to different parameters and some examples were described for each category of agricultural UGVs or field robots. Precision agriculture will be widely implemented if cost-effective field robots are developed. From this study, it is possible to conclude that the most researched perception solutions are based on vision and cloud point sensors, and the UAV carrying some sensors is the preferred robotic solution for monitoring a large field, while a ground-based robot shows a unique design based on its required tasks. As such, agricultural tasks are becoming increasingly automated, above all in high-profit agriculture.

  • research-article
    Huade Xie, Fanquan Zeng, Li Liang, Jingzhen Li, Xianqing Luo, Fang Xie, Chengjian Yang
    2025, 10 (4): 917-930 . https://doi.org/10.3934/agrfood.2025047

    The use of food and agricultural by-products in animal nutrition is gaining attention as a viable strategy to address livestock feed shortages, lower feed costs, and reduce environmental pollution. This study evaluated the fermentation characteristics, nutritional value, and in vitro ruminal digestibility of corn straw silage supplemented with papaya peel at 0 (control), 15, 30, and 45% on a fresh-weight basis. Crude protein content increased significantly at the higher inclusion levels of papaya peel (30% and 45%) compared to the control (p < 0.05). The organic matter and acid detergent fiber contents of papaya peel–treated silages were lower than those of the control silage (p < 0.05). Neutral detergent fiber content was higher in the control and 15% papaya peel–treated silage than in those treated with 30 or 45% papaya peel (p < 0.05). Total digestible nutrients and relative feed values were significantly improved by papaya peel addition compared to the control silage (p < 0.05). Silage with 15% papaya peel had a significantly lower pH and higher lactic and acetic acid contents than the other silages (p < 0.05). Compared with the control silage, papaya peel–treated silages showed higher in vitro ruminal dry matter digestibility, with the 15% treatment showing significantly greater digestibility than that of the control silage (p < 0.05). The control silage had significantly higher H2 production than the papaya peel–treated silage (p < 0.05). Our findings demonstrated that papaya peel addition enhanced fermentation and nutrient digestibility of corn straw silage, with 15% papaya peel inclusion achieving the highest fermentation efficacy and ruminal digestibility.

  • research-article
    Mardhua Plasse Abdillah, Toilibou Soifoini, Dario Donno, Annachiara Fioccardi, Jean Claude Randriamidosy, Julia Luisette Razanamparany, Giovanni Gamba, Gabriele Loris Beccaro
    2025, 10 (4): 931-956 . https://doi.org/10.3934/agrfood.2025048

    The Comoros Islands present a large variety of products and food items, but most of the people lack awareness about the nutritional value and quality of these local resources, contributing to food insecurity. Dioscorea comorensis, a yam species endemic to the Comoros Islands, may represent a valuable crop, meeting the health-promoting needs of the local population. This research aimed to assess the chemical composition of D. comorensis flour for potential food applications. Standardized methods were used for proximate analysis. Mineral elements were evaluated by UV-visible spectrophotometry and atomic absorption spectrometry, while dietary fiber and starch were assessed by formic acid insolubility and polarimetric assays, respectively. Phytochemical characterization involved spectrophotometric tests for total antioxidant capacity (FRAP assay) and total polyphenols (Folin–Ciocalteu method), complemented by HPLC analyses for individual phenolics, vitamin C, organic acids, and sugars. The results showed a high dry matter (86.84%) and carbohydrate (79.52%) content, with significant levels of dietary fiber (19.6%) and protein (5.42%), supporting its role as a health-promoting and energy-rich food source. Mineral analysis highlighted excellent potassium amounts (869.6 mg/100 g), together with relevant quantities of copper, magnesium, and phosphorus. Phytochemical fingerprinting identified significant levels of total polyphenols [42.01 mg GAE/100 g of dried weight (DW)], phenolic acids, flavonols, and organic acids, contributing to a significant antioxidant capacity (8.65 mmol Fe²⁺/kg). Although vitamin C content was limited, the species showed a large spectrum of health-promoting molecules. This preliminary study highlighted that D. comorensis may be considered as a culturally relevant and nutritionally rich crop with potential for integration into sustainable dietary strategies in the Comoros Islands, even if further studies are recommended to evaluate its potential as a health-promoting food application.

  • research-article
    Yari Vecchio, Margherita Masi, Marcello De Rosa
    2025, 10 (4): 957-961 . https://doi.org/10.3934/agrfood.2025049
  • research-article
    Hira Lal Gope, Ashutus Singha, Fahim Mahafuz Ruhad, Md Mahin Erpan Chowdhury, Chandra Kanta Dash, Md Masum Billah, Md Mehedi Hasan, Shohag Barman, Hidekazu Fukai
    2025, 10 (4): 962-983 . https://doi.org/10.3934/agrfood.2025050

    Coffee is the most widely traded and popular beverage globally, and its flavor and quality depend significantly on the absence of defective beans. This study aimed to automate the identification and classification of impurities in green coffee beans, enabling more uniform roasting, as peaberries roast differently due to their unique shape. The automated system enhances efficiency and precision over manual checks, using 4367 green coffee bean images from Bangladesh, divided into six categories: black, sour, fade, broken, normal, and peaberry. The main contribution of this study is providing the first Bangladesh-origin dataset for coffee bean defect detection, paired with recent YOLOv10-N advances tailored to small, subtle defects. The study took an innovative step forward for Bangladesh’s coffee sector, which has traditionally relied on labor-intensive and error-prone manual sorting methods. This approach addresses key inefficiencies and enhances quality control, boosting global market competitiveness. This study shows that Bangladesh’s coffee industry can benefit from using YOLOv10-N to detect defects in green coffee beans, providing a cost-effective and accurate quality control system. We evaluated the following models: EfficientNet, ResNet-50, Faster R-CNN, and several versions of YOLO (v3-v10). Among them, YOLOv10-N was identified as the most successful model, with the highest precision of 0.992, recall of 0.984, F1-score of 0.987, and mean average precision (mAP) of 0.995; YOLOv8 had precision of 0.959 and recall of 0.944, and ResNet-50 had precision of 0.837 and recall of 0.853. The model’s accuracy and resilience can be further improved by creating a larger and more diverse dataset, which will enable it to better detect subtle differences in defects across batches of green coffee beans under varying environmental conditions.

  • research-article
    Mohammed Gagaoua
    2025, 10 (4): 984-988 . https://doi.org/10.3934/agrfood.2025051
  • research-article
    Theodoros Markopoulos, Sotirios Papadopoulos, Stavros Kontakos, Alexandros Tsoupras
    2025, 10 (4): 989-1003 . https://doi.org/10.3934/agrfood.2025052

    The increasing expectations regarding food quality in recent years have prompted a detailed investigation into the factors that define this concept. Several of these factors are strongly shaped by the production method, while in other cases, compositional characteristics are influenced by the production region itself. This creates a distinctive relationship between the product’s basic characteristics and its place of origin, which can be leveraged to ensure consistently high discrimination with minimal variation. In this study, we examined the compositional parameters of 84,425 cow’s milk samples collected from individual farms of neighboring regions in northern Greece, aiming to assess their relationship with the geographical area of production. Four supervised Machine Learning classification methods-k-Nearest Neighbors, Decision Tree, Random Forests, and Support Vector Machines-were employed, all suitable for Big Data analysis. The findings indicate that all four methods consistently classify the milk samples meaningfully only for two of the four regions, specifically the prefectures of Serres and Xanthi. As anticipated, the Random Forest algorithm achieved the strongest classification performance among the tested techniques.

  • research-article
    Dipanwita Bhattacharya, Dhananjay Kumar, Pesingi Pavan Kumar, Arun K. Das, P. K. Nanda, Annada Das, Saurabh Karunamay, Kaushik Satyaprakash, Avanish Singh Parmar, Anshuman Kumar
    2025, 10 (4): 1004-1038 . https://doi.org/10.3934/agrfood.2025053

    This study focused on the development and characterization of a bioactive film of chitosan (1.5%, w/v) integrated with a thyme ( Thymus vulgaris) essential oil nanoemulsion (TNEO). The biopolymer was applied on raw chicken drumsticks to assess its effectiveness in preserving the quality and safety of meat under refrigeration. Gas chromatography‒mass spectrometry (GC-MS/MS) analysis of the thyme essential oil identified key bioactive components, viz. carvacrol (60.18%), m-cymene (22.93%) and thymol (3.24%). The dynamic light scattering (DLS) assay and transmission electron microscopy (TEM) ensured the successful encapsulation and stability of the nanoemulsion. The infusion of thyme nanoemulsion significantly enhanced the morphological features, UV barrier properties, moisture vapor barrier properties, and flexibility of chitosan film-critical properties, fulfilling the requirements for effective meat packaging. Further, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA) were performed to analyze the active biopolymers, which ensured the compatibility between nanoemulsion and chitosan matrix. Notably, the film with 2% TNEO exhibited significant antimicrobial activity against Staphylococcus aureus (14.67 ± 0.33 mm) and Escherichia coli (12.67 ± 0.33 mm), as measured through zones of inhibition (ZOI), and also antioxidant properties (40.05 ± 1.19% reactive scavenging activity). When applied to chicken drumsticks, the 2% TNEO film significantly delayed microbial spoilage, inhibited lipid oxidation, and preserved the color attributes of the meat over a 15-day refrigerated storage period compared to no chitosan and TNEO film. From this study, it is concluded that chitosan-thyme nanoemulsion film can be utilized as a highly promising, green active-packaging solution for extending the shelf-life of raw poultry.

  • research-article
    Aseel Abukayed, Faneela Sajjad, Taha Rababah, Muhammad Saeed, Muhammad Azam, Huda Fish, Israa Keelani, Bandar N. Hamadneh, Ali Almajwal, Vaida Bartkutė-Norkūnienė
    2025, 10 (4): 1039-1055 . https://doi.org/10.3934/agrfood.2025054

    In this study, we aimed to extract and evaluate pectin from apple ( Malus domestica), lemon ( Citrus limon), and lime ( Citrus aurantiifolia)peels using microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE) techniques with different extractants. The effects of microwave power and irradiation time on pectin yield were investigated in MAE. The impacts of temperature and sonication time were assessed for UAE. The extracted pectin was subsequently used to prepare java plum ( Syzygium cumini L.) jam. The highest pectin yield (18.25%) was obtained from lime peel using MAE at 500 W for 3 minutes, while UAE yielded 11.1% from lemon peel at 65 ℃ for 45 minutes. The extracted pectin was characterized as high-methoxy pectin, with a degree of esterification ranging from 50.13% to 61.63%. Fourier transform infrared spectroscopy confirmed its structure, showing a peak at 1700–1770 cm⁻¹ for polygalacturonic acid and characteristic fingerprints in the 1600–1750 cm⁻¹ region. Scanning electron microscopy revealed that UAE-derived apple peel pectin had a ruptured surface, whereas MAE-derived lime peel pectin exhibited a porous structure, indicating a higher degree of hydrolysis. Jams prepared with the pectin showed total soluble solids of 65.1°, 67.2°, and 68.1° Brix for apple pectin jam (APJ), lemon pectin jam (LPJ-a), and lime pectin jam (LPJ-b), respectively. The LPJ-b exhibited the highest viscosity (75.1 cP) and received the best sensory acceptability score. MAE was more effective than UAE, providing a higher yield in a shorter time. Furthermore, the jam formulated with MAE-extracted lime pectin demonstrated superior physicochemical and organoleptic properties.

Publishing model
0

{"submissionFirstDecision":"68","jcrJfStr":"1.8 (2025)"}

Downloads

Submission to first decision (median)
68 days

ISSN 2471-2086 (Online)