This study was conducted to investigate first the bacterial contamination by Enterobacteriaceae, fecal coliforms and the prevalence of Salmonella spp. and second to identify the main associated risk factors in Algerian farms, slaughterhouses and butcheries during a two-years period. Thus, a cross-sectional study was performed using a simple random sampling method to target 20 farms, 10 slaughterhouses and 5 butcheries. A structured questionnaire was further used to assess hygienic status of the farms and slaughterhouses. A total of 265 samples were collected from wall, floor, litter, food, water and animals’ samples composed mainly of meat, neck skin and liver. Samples from walls and floors, from different sites were analyzed to evaluate the overall contamination and the hygiene of sites for Total viable bacteria, Enterobacteriaceae counts and Fecal coliforms counts . Furthermore, E.coli and salmonella spp. were identified in all samples. The overall contamination by sampling sites expressed as log10 CFU/g (mean ± SD) for Total Aerobic Microbial Count, Enterobacteriaceae count and fecal coliforms counts were around 4.71 ± 1.1, 4.73 ± 1.3 and 4.68 ± 1.2 respectively. The findings evidenced that the prevalence of E.coli and Salmonella spp. were 63.40% and 18.49% respectively. The highest rate of E.coli contamination was for poultry farms (70%), beef farms (64%) and butcheries (74.54%) followed by poultry meat slaughterhouses (60%) and sheep farms (48%) while beef slaughterhouses have the lowest rate of contamination (33.84%). For salmonella spp. the contamination was found to be mainly in poultry meat slaughterhouses (31.11%), butcheries (25.45%), followed by poultry farms (22%), beef farms (20%) and sheep farms (12%) while beef slaughterhouses have the lowest rate of contamination (4.61%). This study evidenced multifactor effects of microbial contamination in farms such as animal density, litter hygiene and scraping, manure storage, water and pest control, contact with other animals and decontamination process. Overall, this trial indicated a high rate of microbial contamination for which further studies are needed to determine all the potential risk factors in order to evaluate the corrective effects.
Packaging material plays an important role in minimizing food waste in the supply chain. This study evaluated the light-protective effects of wrapping films as a secondary packaging material on the deterioration of extra virgin olive oil after exposure to sunlight for 5 weeks. Milky white polyethylene terephthalate (MW-PET) and aluminum oxide vapor-deposited polyethylene terephthalate (AV-PET) were used on bottles of different transparency (clear or amber glass) as the primary packaging material. Wrapping the bottles with either PET film resulted in protection against fatty acid release and secondary oxidation of the oils upon exposure to sunlight, but no protection against the primary oxidation of the oils. Although sunlight exposure induced the degradation of minor components, including chlorophyll and carotenoid pigments, in oils stored in clear glass bottles with no film, in oils stored in clear and amber glass bottles with either type of PET film, these compounds were partially protected from degradation during storage. In addition, sunlight exposure induced a decrease in E2-hexenal, which has a positive olive aroma in oils stored in clear glass bottles with no film, but this decrease was not observed to the same extent in oils stored in clear and amber glass bottles with either PET film. The light-protective effects of the AV-PET film were significantly higher than those of the MW-PET film. These results showed that secondary packaging with these PET films provided more effective protection against sunlight-induced oxidative deterioration of extra virgin olive oil during storage in primary materials, such as glass bottles, compared with storage in glass bottles with no secondary packaging.
The dual layers of Nano-membranes barrier, could succeeded in regulation nutrient element and control water-borne disease by improving aerations through added dual layers of nano-membranes, this plantation model provide concept of providing hydrophilic properties and 500 nm pore size believed to be much precision tools for agricultural utilization. This rebuilding of pineapple cultivation was optimized in green-house with natural ventilation, Optimized humidity and free watering were properly practiced by implement of diffusion cage for a novel revealed boundary effect by 500 nm mold inject product. Effect indicated as indicated: Cellulose, PBT, CTA in sequence have better boundary effects over limiting the diffusion of nitrate, phosphate, and a small part of potassium in the root boundary regime through proper moisture with 0.5–0.8 L/pot button irrigation, The intensity of boundary effect were revealed in kinetic analysis follow in sequence: EC (1500 mg L−1) >> nitrate (300 mg L−1) > TPO (2.5 mg L−1), while highly fluctuate for TPO. Then indication of hydrophilic PBT was better than PP was verified in barrier model. In the growth stage, separate initial I–III for direct releasing from the fertilizer and III–VI for hydrolysis & secretion of nutrient, especially for TPO anion form, indicate highly ion charged or polar attraction exerted. While phosphate was delivered slowly, the organic practice was found promising in deliver and uptake to the final two or three stage for flowering and fruiting. The verification of deliver of nutrient by double caged box in the rhigime zone, indicated effective in lowered the damping off/nematode syndrome, which opened the extension cropping in suboptimal area for pineapples. The success of growth character improved by control disease and pest, reach complete maturation. Under 80 % of final fruiting, the balance analysis show consistence in expectation for Pya (wild) > Pyc (hybrid) > Pyb (interbreed).
Nowadays, the interest towards functional food has increased; however, several factors jeopardize their diffusion on the market. In fact, functional foods do not have either a specific regulatory framework or a statutory definition in Europe. A functional food with any nutrition and health claim related to vitamins, minerals, or other substances in their labeling have to meet only the specific requirements established by the Regulation (EC) 1924/2006. Consequently, these products are not uniquely recognizable and the perception of consumers towards them remains a confusing concept. In this scenario, this paper investigates knowledge and factors affecting consumers‟ consumption intention towards functional food in Italy. For this purpose, a survey was designed, and a logit model was used to explain motivators for the consumption of functional products. The result indicates that consumers are still confused about the concept of functional foods. An important motive for the consumption of functional food is the maintenance of good nutrition, health conditions as well as well-being. An additional factor in the success of functional products is the familiarity and the knowledge of the effects of a particular product on health conditions. The probability of the consumption of a functional product increases when the consumer associates the knows of the functional characteristic and the healthful properties with the consequences of their consumption. Results are useful to verify the opportunities for further expansion of these products on the Italian market.
The use of varieties that are able to adapt well to extreme environments is one strategy to overcome the challenges of decreasing production in sub-optimal land. Indonesian tropical rice varieties (Jatiluhur, IPB 9G, IPB 3S, Hipa 19, Mentik Wangi, Ciherang, Inpari 17, and Mekongga) have been tested and established as water-used-efficient varieties in an optimal environment. However, to date, these varieties have not been examined in the suboptimal area, in particular, drought stress conditions. Therefore, this study aimed to evaluate the adaptation response of production, morphological, and physiological character of several water-efficient rice varieties under drought stress in the field. The study was designed in a split-plot with two factors and 4 replications, where the first factor (main plot) was drought stress stages i.e. vegetative (Dv), reproductive (Dr), generative (Dg), and control (Dc). The second factor was rice varieties, consisting of eight varieties, i.e., Jatiluhur, IPB 3S, IPB 9G, Hipa 19, Mentik Wangi, Ciherang, Inpari 17, and Mekongga. The experiment was conducted from May to December 2018 in Muneng Kidul Village, Probolinggo Regency, East Java Province. The experimental variables were morphology, production, leaf scrolling score during drought stress, drought sensitivity index, water use efficiency, physiology and root anatomy. The result showed that upland rice varieties were more tolerant to drought stress and had a higher water use efficiency than lowland rice varieties. This shows that Jatiluhur and IPB 9G which are indicated to be adaptive to drought stress, and have the ability to regulate water use more efficiently when drought stress occurs. Therefore, water use efficiency could be used as selection characters under drought conditions in rice particularly tropical upland rice. Moreover, morphological characters, i.e., grain yiled per plot, weight of pithy grain, weight of shoot biomass and weight of roots could be the selection characters to predict drought tolerant tropical rice. According to physiological characters, photosynthesis rate, transpiration rate, proline content, malondialdehyde content, leaf water potential and leaf greenness could be used as a selection tool to predict water use efficient genotypes in rice. However, further studies are needed to understand the complex mechanisms of water use efficiency by combining various approaches.
Spent coffee grounds, the residue from coffee brewing, are still underutilized even though they contain several useful organic compounds including proteins. To valorize the spent coffee grounds, the spent coffee ground protein was investigated using ultrasonic-assisted extraction as a pretreatment to conventional extraction. The pretreatments involved different ultrasound amplitudes (40%, 60% and 80%) and extraction times (10, 20 and 30 min) and their effects on the physicochemical and functional properties including antioxidant activity of protein extract. It was found that the protein content extracted was increased approximately 2 times, compared to the initial spent coffee grounds. Furthermore, the ultrasonic-assisted extraction affected the physicochemical properties, functional properties and antioxidant activity of the protein extract. The 80% amplitude for 10 min extraction time improved the foaming capacity, foaming stability, emulsifying activity index and the emulsifying stability index of protein extract. The pretreatment at 20 min extraction time provided the highest antioxidant activity (933.92–976.03 mM Trolox eq/g protein extract) and the highest total phenolic content (267.66–304.81 mg GAE/g protein extract). Nonetheless, protein extract using ultrasonic-assisted extraction resulted in higher total phenolic content and antioxidant activity without changes in the protein structure as confirmed by changes in FT-IR spectra and SDS-PAGE profiles. Thus, the spent coffee ground protein can be an interesting and alternative plant protein with functional properties for food application. Moreover, this work showed the feasibility to reduce waste and the food waste valorization.