Results of search investigation concerning the development of effective methods for direct undersowing into the sod of natural lands are given. Comparative analysis of sowing quality with active and passive tools is carried out. Process variables and operation characteristics of grass seeders СДК-2.8 and СТС-2.1 are specified.
The amplitude of regulating body oscillations under action of random stationary perturbations on control system is evaluated. It is established that the required average amplitude of regulating body movements can be ensured by restricting the index of oscillation.
Сonstruction of modernized narrow-row disc opener is developed. The results of design of experiments on substantiation of construction characteristics of opener allowing to realize the stripe broadcast seeding are presented.
The article deals with the theoretical justification and calculation of key parameters of beater drum of tillage machine used for soil preparation before potatoes and other root crops planting.
Technologies of mechanical soil tillage assume its deformation and destruction. These processes are difficult for generalization and mathematical description. Basic provisions for determination of wave grounds of energy transfer in soil body during its deformation and destruction are proposed. A way to clarify the rational equation of academician Goryachkin V.P. concerning the traction resistance of tillage tools based on the principles of theory of involvement of soil masses in movement are suggested.
Conditions and results of experimental field researches of wheeled machine-tractor units of class 1.4 equipped with demountable hooks are considered. Limits of considered factors in natural scale of measurement are presented. Traction characteristics and power balance of the units are shown.
The influence of absolute soil humidity on the porosity of soil packing is shown. It is noted that soil porosity will be reduced at the expense of decreasing of air pores and increasing of solid particles volume as a result of soil compression with mover, strake, block etc. at constant humidity. The analysis of obtained models is given.
Ways of practical implementation of power characteristics for traction and traction-power tractors during the formation of their types are considered.
Electromechanical processes arising at the operation of superconducting inductive storage device and current limiters in power system with synchronous loading are considered. A mathematical model is developed. Relations between characteristics of power system, storage device and current limiters are investigated.
An original continuously variable two-flow hydrovolumetric mechanical gearbox is presented. The gearbox is equipped with two adjustable hydraulic units and intended for a tractor with 300-350 hp engine. Parameters of construction are designed on the basis of system approach to the automated analysis, synthesis and projecting of hydrovolumetric mechanical transmissions.
Data of laboratory and industrial tests of buttermaker which uses acoustic vibrations for cream manufacturing are given.
Proposals on mechanization of operations in farms by means of application of new small-sized machinery, namely tractor-mobiles and autotractors, are considered. Ways of autotractor cross-country ability improvement in severe soil conditions and realization of self-loading and unloading are projected.
Results of experimental researches concerning the determination of dependency between pressure of pressing plate on fiber and pressure on base and lateral walls as well as pressure distribution along height and perimeter of pressing chamber are given.
The results of laboratory and field tests of forage harvester КСК-100А equipped with a system of capacity stabilization are given. Advantages of modernized harvester are revealed. Its performance increased and total load on the engine decreased. The stabilization coefficient of loading is 1.14, stabilization coefficient of vegetative mass layer thickness is 1.35.
Necessity of use of a device for energy saturation of liquid motor fuel is grounded and a construction for its realization is proposed.
A method of determination of optimal quantitative and age composition of the tractor fleet in conditions of development of system with limited resources is presented.
Constructions of grinders for forage harvester available on Russian market are briefly reviewed. Comparative characteristics of domestic and foreign grinding devices and results of cluster analysis are given.
Versions of limiter of radial deformation for the rubber-metal swivel joint of crawler-mounted mover are presented. This device allows to stabilize radial clearance between the limiter and the link ear.