Quantitative assessment of energy changes in underground coal excavations using numerical approach

Abstract

Coal burst is caused by a dynamic and unstable release of energy within the overstressed rock mass/coal during the mining process. Although the occurrence of coal burst is a result of the complex impacts of many factors, a major component of coal burst mechanism is associated with energy storage and release. This study reviewed the sources of energy that can contribute to a coal burst, principally strain and potential energy stored in the coal mass around excavations, and radiated seismic energy released by geological discontinuities. The energy balance concept proposed by [1] was utilised in numerical modellings to compute the radiated seismic energy in a modelling system and the kinetic energy of ejected rock/coal for a given burst scenario. The modelling results showed that the strain energy density (SED) around excavations increases with increasing mining depth and the maximum SED area migrates deeper into the coal. For the effect of geological features on both roadway and longwall face, the coal burst risk proneness can be assessed considering the proposed energy terms. According to the results of energy changes in excavations, the modelling predicts that for depths of ejection 2 m and 3 m the kinetic energy of a burst increases as the mining depth increases from 100 m to 1000 m, but for depth of ejection 1 m only increases until mining depth reaches 700 m and then decreases. The proposed energy-based model indicators can deepen the understanding of energy changes and the associated coal burst risks for different mining conditions.

Keywords

Coal burst / Energy changes / Numerical approaches

References

[1] A. Iannacchione, S.C. Tadolini, Occurrence, prediction, and control of coal burst events in the US, Int. J. Min. Sci. Technol. 26 (1) ( 2016a) 39-46.

[2] C. Zhang, I. Canbulat, B. Hebblewhite, C.R. Ward, Assessing coal burst phenomena in mining and insights into directions for future research, Int. J. Coal Geol. 179 ( 2017a) 28-44.

[3] O. Vardar, C. Zhang, I. Canbulat, B. Hebblewhite, A semi-quantitative coal burst risk classification system, Int. J. Min. Sci. Technol. 28 (5) ( 2018) 721-727.

[4] N. Cook, The basic mechanics of rockbursts, J. S. Afr. Inst. Min. Metall 64 (3) ( 1963) 71-81.

[5] N. Cook, E. Hoek, J. Pretorius, W. Ortlepp, M. Salamon, Rock mechanics applied to study of rockbursts, J. S. Afr. Inst. Min. Metall 66 (10) ( 1966) 436-528.

[6] N. Cook, C. Fenton, F. Lancaster, R. More-O'Ferall, W. Nienaber, A. van Schalkwijk, R. Steijn, J. Tyser, H. Wagner, D. Waterman, An Industry Guide to the Amelioration of Hazards of Rockbursts and Rockfalls, Chamber of Mines of South Africa, 1978.

[7] H. Maleki, J. Aggson, F. Miller, J. Agapito, Mine layout design for coal bump control, in: Proceedings 6th International Conference on Ground Control in Mining, West Virginia University, Morgantown, 1987, pp. 32-46.

[8] S. Spottiswoode, Volume excess shear stress and cumulative seismic moments, in: Proceedings 2nd International Symposium on Rockbursts and Seismicity in Mines, Pergamon, Minneapolis, 1990, p. A397.

[9] K.A. Heasley, An examination of energy calculations applied to coal bump prediction, in: Proceedings 32nd US Symposium on Rock Mechanics (USRMS), American Rock Mechanics Association, 1991.

[10] A. Jager, J. Ryder, A Handbook on Rock Engineering Practice for Tabular Hard Rock Mines, Safety in Mines Research Advisory Committee, Johannesburg: South Africa, 1999a.

[11] G.E. Blight, Soil mechanics principles in underground mining, J. Geotech. Eng. 110 (5) ( 1984) 567-581.

[12] J. Napier, Energy changes in a rockmass containing multiple discontinuities, J. S. Afr. Inst. Min. Metall 91 (5) ( 1991) 145-157.

[13] D.G.F. Hedley, Rockburst Handbook for Ontario Hardrock Mines, Canmet), 1992b.

[14] B.H. Brady, E.T. Brown, Rock Mechanics:for Underground Mining, Springer Science & Business Media, 2013.

[15] M. Salamon, Energy considerations in rock mechanics: fundamental results, J. S. Afr. Inst. Min. Metall 84 (8) ( 1984) 233-246.

[16] J. Ryder, Excess shear stress in the assessment of geologically hazardous situations, J. S. Afr. Inst. Min. Metall 88 (1) ( 1988) 27-39.

[17] C. Wei, C. Zhang, I. Canbulat, W. Huang, Numerical investigation into impacts of major fault on coal burst in longwall mining-A case study, Int. J. Rock Mech. Min. Sci. 147 ( 2021), 104907.

[18] R.J. Garvey, A Study of Unstable Rock Failures Using Finite Difference and Discrete Element Methods, Colorado School of Mines, 2013.

[19] E. Kias,Investigation of Unstable Failure in Underground Coal Mining Using the Discrete Element Method, PhD thesis, Colorado School of Mines, 2013.

[20] K.W. Harris, Improved Understanding of Coal Pillar Behavior and Bump Potential through the Ground Response Curve, 2015.

[21] R. Gu, Distinct Element Model Analyses of Unstable Failures in Underground Coal Mines, Colorado School of Mines, 2013.

[22] R. Gu, U. Ozbay, Distinct element analysis of unstable shear failure of rock discontinuities in underground mining conditions, Int. J. Rock Mech. Min. Sci. 68 ( 2014) 44-54.

[23] E.C. Poeck, Analyzing the Potential for Unstable Mine Failures with the Calculation of Released Energy in Numerical Models, Colorado School of Mines. Arthur Lakes Library, 2016.

[24] Z. Khademian,Computational Framework for Studying Seismicity Induced by Rock Engineering Activities, PhD thesis, Colorado School of Mines, 2018.

[25] Z. Khademian, U. Ozbay, Computational framework for simulating rock burst in shear and compression, Int. J. Rock Mech. Min. Sci. 110 ( 2018) 279-290.

[26] Z. Khademian, U. Ozbay, Modeling violent rock failures in tunneling and shaft boring based on energy balance calculations, Tunn. Undergr. Space Technol. 90 ( 2019) 62-75.

[27] F. Gao, L. Yang, Experimental and numerical investigation on the role of energy transition in strainbursts, Rock Mech. Rock Eng. 54 (9) ( 2021) 5057-5070.

[28] S.M.A. Manouchehrian,Numerical Modeling of Unstable Rock Failure, PhD thesis, Laurentian University of Sudbury, 2016.

[29] A. Manouchehrian, M. Cai, Analysis of rockburst in tunnels subjected to static and dynamic loads, J. Rock Mech. Geotech. Eng. 9 (6) ( 2017) 1031-1040.

[30] C. Zhang, I. Canbulat, F. Tahmasebinia, B. Hebblewhite, Assessment of energy release mechanisms contributing to coal burst, Int. J. Min. Sci. Technol. 27 (1) ( 2017b) 43-47.

[31] A. Manouchehrian, M. Cai, Numerical modeling of rockburst near fault zones in deep tunnels, Tunn. Undergr. Space Technol. 80 ( 2018) 164-180.

[32] O. Vardar, C. Wei, C. Zhang, I. Canbulat, Numerical investigation of impacts of geological faults on coal burst proneness during roadway excavation, Bull. Eng. Geol. Environ. 81 (1) ( 2022) 1-12.

[33] C. Wei, O. Vardar, C. Zhang, J. Watson, I. Canbulat, Numerical Analysis of Strain Energy Density at Development and Longwall Face, 2022 Resource Operators Conference, Wollongong, Australia, 2022a.

[34] W. Ortlepp, T. Stacey, Rockburst mechanisms in tunnels and shafts, Tunn. Undergr. Space Technol. 9 (1) ( 1994) 59-65.

[35] W.D. Ortlepp, Rock Fracture and Rockbursts: an Illustrative Study, South African Institute of Mining and Metallurgy, Johannesburg, 1997.

[36] A. Jager, J. Ryder, A Handbook on Rock Engineering Practice for Tabular Hard Rock Mines, Safety in Mines Research Advisory Committee, Johannesburg, 1999b.

[37] J.M. Galvin, Ground Engineering Principles and Practices for Underground Coal Mining, Springer, 2016.

[38] A.T. Iannacchione, S.C. Tadolini, Occurrence, predication, and control of coal burst events in the US, Int. J. Min. Sci. Technol. 26 (1) ( 2016b) 39-46.

[39] S.J. Gibowicz, A. Kijko, An Introduction to Mining Seismology, Academic Press, 1994.

[40] A. Mendecki, G. Van Aswegen, P. Mountfort, A Guide to Routine Seismic Monitoring in Mines: Creda Communications, 1999 (Cape Town).

[41] B. Kostrov, Seismic moment and energy of earthquakes, and seismic flow of rock, Phys. Solid Earth 1 ( 1974) 23-44.

[42] K. Aki, P.G. Richards, Quantitative Seismology, University Science Books, 2002.

[43] Y. Potvin, J. Jarufe, J. Wesseloo, Interpretation of seismic data and numerical modelling of fault reactivation at El Teniente, Reservas Norte sector, Min. Technol. 119 (3) ( 2010) 175-181.

[44] G. Hofmann, L. Scheepers, Simulating fault slip areas of mining induced seismic tremors using static boundary element numerical modelling, Min. Technol. 120 (1) ( 2011) 53-64.

[45] J. Sjo€berg, F. Perman, C. Quinteiro, L. Malmgren, C. Dahner-Lindkvist, M. Boskovic, Numerical analysis of alternative mining sequences to minimise potential for fault slip rockbursting, Min. Technol. 121 (4) ( 2012) 226-235.

[46] G. Hoffmann, S. Murphy, L. Scheepers, G. van Aswegen,Surface stress modelling of some shear slip seismic events that occurred in Anglogold Ashanti's tabular mines, in:Proceedings 8th International Symposium on Rockbursts and Seismicity in Mines, 2013, pp. 219-231.

[47] A. Sainoki, H.S. Mitri, Dynamic modelling of fault-slip with Barton's shear strength model, Int. J. Rock Mech. Min. Sci. 67 ( 2014) 155-163.

[48] A. Sainoki, H.S. Mitri, Effect of slip-weakening distance on selected seismic source parameters of mining-induced fault-slip, Int. J. Rock Mech. Min. Sci. 73 ( 2015) 115-122.

[49] L. Jiang, P. Kong, P. Zhang, J. Shu, Q. Wang, L. Chen, Q. Wu, Dynamic analysis of the rock burst potential of a longwall panel intersecting with a fault, Rock Mech. Rock Eng. 53 ( 2020) ( 2019) 1737-1754.

[50] C. Wei, C. Zhang, I. Canbulat, Numerical analysis of fault-slip behaviour in longwall mining using linear slip weakening law, Tunn. Undergr. Space Technol. 104 ( 2020), 103541.

[51] B. Hebblewhite, J. Galvin, A review of the geomechanics aspects of a double fatality coal burst at Austar Colliery in NSW, Australia in April 2014, Int. J. Min. Sci.Technol. 27 (1) ( 2017) 3-7.

[52] C. Wei, C. Zhang, I. Canbulat, A. Cao, L. Dou, Evaluation of current coal burst control techniques and development of a coal burst management framework, Tunn. Undergr. Space Technol. 81 ( 2018) 129-143.

[53] C. Wei, C. Zhang, I. Canbulat, Z. Song, L. Dai, A review of investigations on ground support requirements in coal burst-prone mines, Int. J. Coal Sci. Technol. 9 (1) ( 2022b) 1-20.

[54] D.G. Hedley, Rockburst Handbook for Ontario Hardrock Mines, Canmet, 1992a. [55] Itasca, Universal Distinct Element Code v6.00 Users' Manual, Itasca, Minneapolis),2014.

[55] A. McGarr, S. Spottiswoode, N. Gay, W. Ortlepp, Observations relevant to seismic driving stress, stress drop, and efficiency, J. Geophys. Res. Solid Earth 84 (B5) ( 1979) 2251-2261.

[56] S. Spottiswoode, Seismic attenuation in deep-level mines, Rockbursts and Seismicity in Mines, 1993, pp. 409-414.