Frontiers of Optoelectronics >

2010 , Vol. 3 >Issue 2: 211 - 215

DOI: https://doi.org/10.1007/s12200-010-0006-z

Research articles

Design and fabrication of waveguide-based chip-to-chip optical interconnection network on printed circuit boards

Expand
  • 1.Wuhan National Laboratory for Optoelectronics, College of Optoelectronic Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China；Experimental Teaching Center of Information Technology, China University of Geosciences, Wuhan 430074, China; 2.Wuhan National Laboratory for Optoelectronics, College of Optoelectronic Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China; 3.Experimental Teaching Center of Information Technology, China University of Geosciences, Wuhan 430074, China;

Published date: 05 Jun 2010

Fold

Abstract

A waveguide-based chip-to-chip optical interconnection network on printed circuit board (PCB) was designed and fabricated, and experiments confirmed that the data rate in each channel could reach above 3.125 Gbit/s and the bit error rate (BER) could be up to 1.27×10−18, which would be a good solution to solve the communication bottlenecks between high-speed very large scale integration chips. Besides, the whole design and fabrication of optical interconnection network on printed circuit board has the advantages of high reliable, low cost and ease of manufacture.

Cite this article

Zhihua YU, Fengguang LUO, Xu DI, Qing TAO, Weilin ZHOU, Bin LI, Liangjia ZONG, Guangjun WANG, . Design and fabrication of waveguide-based chip-to-chip optical interconnection network on printed circuit boards[J]. Frontiers of Optoelectronics, 2010 , 3(2) : 211 -215 . DOI: 10.1007/s12200-010-0006-z

Options
Outlines

/

〈 〉