%A S. SHANKAR GANESH,A. B. KOTESWARA RAO %T Error analysis and optimization of a 3-degree of freedom translational Parallel Kinematic Machine %0 Journal Article %D 2014 %J Front. Mech. Eng. %J Frontiers of Mechanical Engineering %@ 2095-0233 %R 10.1007/s11465-014-0300-3 %P 120-129 %V 9 %N 2 %U {https://journal.hep.com.cn/fme/EN/10.1007/s11465-014-0300-3 %8 2014-05-22 %X

In this paper, error modeling and analysis of a typical 3-degree of freedom translational Parallel Kinematic Machine is presented. This mechanism provides translational motion along the Cartesian X-, Y- and Z- axes. It consists of three limbs each having an arm and forearm with prismatic-revolute-revolute-revolute joints. The moving or tool platform maintains same orientation in the entire workspace due to its joint arrangement. From inverse kinematics, the joint angles for a given position of tool platform necessary for the error modeling and analysis are obtained. Error modeling is done based on the differentiation of the inverse kinematic equations. Variation of pose errors along X, Y and Z directions for a set of dimensions of the parallel kinematic machine is presented. A non-dimensional performance index, namely, global error transformation index is used to study the influence of dimensions and its corresponding global maximum pose error is reported. An attempt is made to find the optimal dimensions of the Parallel Kinematic Machine using Genetic Algorithms in MATLAB. The methodology presented and the results obtained are useful for predicting the performance capability of the Parallel Kinematic Machine under study.