Parasitic rotation evaluation and avoidance of 3-UPU parallel mechanism

Abstract

Based on the prototype of 3-UPU (universal-prismatic-universal joint) parallel mechanism proposed by Tsai [1], the parasitic rotation evaluation is performed and calculated the bound of instability of SNU Seoul National University 3-UPU parallel mechanism. Through analysis of the terminal constraint system of the 3-UPU parallel mechanism, the equation about the parasitic rotation and limited clearance is presented. Then the norm of possible parasitic rotation is employed to evaluate the mechanism stability with limited clearance. The higher this number the worst is the pose, the lower it is the best it is. And the contour atlas of parasitic rotation is obtained, which can be used for further analysis and design. With the practice experiment result of SUN 3-UPU parallel mechanism, we find it’s bound of instability, which indicates there will appear the parasitic rotation when the number exceeds the bound. Finally, the method for avoidance of possible parasitic motions is presented by adding redundantly actuated limbs.

Key words： parallel mechanism; 3-UPU (universal-prismatic-universal joint); parasitic motions; limited clearance; redundantly actuated limbs

Acknowledgements

This research work was sponsored by National Science Foundation of China (Grant Nos. 51175029, 51075025), the Research Fund for the Doctoral Program of Higher Education of China (No. 20090009110023) and the Fundamental Research Funds for the Central Universities (No. 2011JBM102, 2011YJS273).

References

1 Tsai L W. Kinematics of a three-DOF platform with three extensible limbs. In: Recent Advances in Robot Kinematics, Lenarčič J and Parenti-Castelli V eds. Boston: Kulwer Academic Publishers, 1996, 401-410

2 Gregorio R D, Parenti-Castelli V. Mobility analysis of the 3-UPU parallel mechanism assembled for a pure translational motion. Journal of Mechanical Design, 2002, 124(2): 259-264

3 Hervé J M, Sparacino F. Structural synthesis of parallel robots generating spatial translation. In: Proceedings of the Fifth International Conference on Advanced Robotics, 1991, 808-813

4 Hervé J M. New translational parallel manipulators with extensible parallelograms. In: Proceedings of the 11th World Congress in Mechanism and Machine Science. Tianjin, China, 2004, 1599-1603

5 Tsai L W. Systematic enumeration of parallel manipulator. In: Proceedings of the 1st European-American Forum on Parallel Kinematic Machines. Milan, Italy, 1998, 1-11

6 Carricato M, Parenti-Castelli V. A family of 3-DOF translational parallel manipulators. Journal of Mechanical Design, 2003, 125(2): 302-307

7 Carricato M, Parenti-Castelli V. Singularity-free fully-isotropic translational parallel mechanisms. International Journal of Robotics Research, 2002, 21(2): 161-174

8 Kong X W, Gosselin C. Type synthesis of 3-DOF translational parallel manipulators based on screw theory. Journal of Mechanical Design, 2004, 126(1): 83-92

9 Gogu G. Structure Synthesis of Parallel Robots. New York: Springer, 2008

10 Gogu G. Structural synthesis of fully-isotropic translational parallel robots via theory of linear transformations. European Journal of Mechanics, A, Solids, 2004, 23(6): 1021-1039

11 Huang Z, Li Q. Type synthesis of symmetrical lower-mobility parallel mechanisms using the constraint-synthesis method. International Journal of Robotics Research, 2003, 22(1): 59-79

12 Jin Q, Yang T L. Theory for topology synthesis of parallel manipulators and its application to three-dimension-translation parallel manipulators. Journal of Mechanical Design, 2004, 126(4): 625-639

13 Joshi S A, Tsai L W. Jacobian analysis of limited-DOF parallel manipulator. Journal of Mechanical Design, 2002, 124(2): 254-258

14 Tsai L W, Joshi S A. Kinematics and optimization of a spatial 3-UPU parallel manipulator. Journal of Mechanical Design, 2000, 122(4): 439-446

15 Joshi S A, Tsai L W. A comparison study of two 3-DOF parallel manipulators one with three and the other with four supporting legs. IEEE Transactions on Robotics and Automation, 2003, 19(2): 200-209

16 Guan L W, Wang J S, Wang L P. Mobility analysis of the 3-UPU parallel mechanism based on screw theory. In: Proceedings of the 2004 International Conference on Intelligent Mechatronics and Automation. Chengdu, China, 2004, 309-314

17 Han C, Kim J, Kim J, Park F C. Kinematic sensitivity analysis of the 3-UPU parallel mechanism. Mechanism and Machine Theory, 2002, 37(8): 787-798

18 Zlatanov D, Bonev I. Constraint singularity of parallel mechanism. In: Proceedings of the IEEE International Conference on Robotics and Automation. Washington D.C., USA, 2002, 496-502

19 Bonev I, Zlatanov D. The mystery of the singular SNU translational parallel robot. http://www.parallemic.org/Reviews/Review004.html

20 Zlatanov D, Bonev I, Gosselin C. Constraint singularities as configuration space singularities. In: Advances in Robot Kinematics: Theory and Applications, Lenarčič J and Thomas F eds. Boston: Kluwer Academic Publishers, 2002, 183-192

21 Wolf A, Shoham M. Investigation of parallel manipulators using linear complex approximation. Journal of Mechanical Design, 2003, 125(3): 564-572

22 Wolf A, Shoham M. Investigation of singularities and self-motions of the 3-UPU robot. In: Advances in Robot Kinematics: Theory and Applications, Lenarčič J and Thomas F eds. Boston: Kluwer Academic Publishers, 2002, 165-174

23 Conconi M, Carricato M. A new assessment of singularities of parallel kinematic chains. IEEE Transactions on Robotics and Automation, 2009, 25(4): 757-770

24 Gogu G. Constraint singularities and the structural parameters of parallel robots. In: Advances in Robot Kinematics: Analysis and Design, Lenarčič J and Wenger P eds. New York: Springer, 2008, 3-12

25 Chebbi A H, Parenti-Castelli V. Geometric and manufacturing issues of the 3-UPU pure translational manipulator. In: New Trends in Mechanism Science: Analysis and Design, Mechanisms and Machine Science 5. 2010, 595-603

26 Chebbi A H, Affi Z, Romdhane L. Kinetostatic and singularity analyses of the 3-UPU translational parallel robot. In: Computational Kinematics: Proceedings of the 5th International Workshop on Computational Kinematics. New York: Springer, 2009, 61-68

27 Merlet J P. Parallel Robot. New York: Springer, 2006

28 Tsai L W. Robot Analysis: The Mechanics of Serial and Parallel Manipulators. New York: Wiley, 1999

29 Fang Y F, Tsai L W. Structure synthesis of a class of 4-DoF and 5-DoF parallel manipulators with identical limb structures. International Journal of Robotics Research, 2002, 21(9): 799-810

30 Kong X W, Gosselin C. Type Synthesis of Parallel Mechanisms. New York: Springer, 2007