Frontiers of Mechanical Engineering >

2010 , Vol. 5 >Issue 4: 446 - 449

DOI: https://doi.org/10.1007/s11465-010-0113-y

RESEARCH ARTICLE

Rotating magnetic beacons magnetic field strength size in SAGD

  • Bing TU ,
  • Desheng LI ,
  • Enhuai LIN ,
  • Bin LUO ,
  • Jian HE ,
  • Lezhi YE ,
  • Jiliang LIU ,
  • Yuezhong WANG
Expand
  • Mechanical & Electronic Technology Research Center, Beijing University of Technology, Beijing 100124, China

Received date: 29 Apr 2010

Accepted date: 04 Jun 2010

Published date: 05 Dec 2010

Copyright

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg
Fold

Abstract

Rotation magnetic beacons magnetic field strength is very important to drill parallel horizontal twin wells in steam assisted gravity drainage (SAGD). This paper analyzes a small magnet with a diameter of 25.4 mm. At each end, there is a length of 12.6 mm with permanent magnet, and in the middle, there is a length of 78 mm with magnetic materials. The magnetic field strength generated by the magnetic material of 1J12, 1J50, and 1J79 is analyzed, respectively. ANSOFT software is used to simulate the magnetic field strength generated by different magnetic materials above, which also be tested through experimental methods. The comparison of the simulation and experimental results show that experimental and simulation results are basically consistent, and the results can meet the specific requirements of engineering applications.

Key words： rotating magnetic beacons; steam assisted gravity drainage (SAGD); ANSOFT

Cite this article

Bing TU , Desheng LI , Enhuai LIN , Bin LUO , Jian HE , Lezhi YE , Jiliang LIU , Yuezhong WANG . Rotating magnetic beacons magnetic field strength size in SAGD[J]. Frontiers of Mechanical Engineering, 2010 , 5(4) : 446 -449 . DOI: 10.1007/s11465-010-0113-y

References

Publishing order | Descend order by publishing year | Descend order by cited within
1
Kuckes A F, Hay R T, McMathon J, Nord A G, Schilling D A, Morden J. New electromagnetic surveying/ranging method for drilling parallel horizontal twin wells. In: Proceedings of IADC/SPE27466 Drilling Conference, 1994, 322–333

2
Kuckes A F, Pitzer R G, Nekut A G. Relative drill bit direction measurement. United States Patent Application Publication. <patent>Pub.No. 2003/0085059A1</patent>, 2003

3
Hu H Y, Chen Q S. RMRS application on target-hitting of horizontal drilling. Geology and Prospecting, 2008, (6): 89–92

4
Xiang J W, Liu C S. New developments of directional opposite joints in the connected brine wells. China Well and Rock Salf, 2002, (33): 20–22

5
Liu G Q, Zhao L Z. The Finite Element Analysis of Ansoft Engineering Electromagnetic Field. Beijing: Publishing House of Electronics Industry, 2005 (in Chinese)

6
Ye X Y, Yang C S. Determ ination of content of Mn,Si,Ni,Cu,V in 1J12 soft magnetic alloys by ICP-AES. Chemistry Analysis Measure, 2009, (18): 19–21

7
Zhang Q, ZhangR. Study about process of electroplating Nickel on 1J50 material. Scrawl Act and Electroplate, 2008, 6: 39–41

8
Cao J, Wang Y F. Influence of annealing process on magnetic properties of 1J79 alloy. Material &Heat Treatment, 2008, (10): 82–89

Options
Outlines

/

〈 〉