Crystallization and viscosity-temperature characteristics during co-gasification of industrial sludge and coal

Abstract

Co-gasification of industrial sludge (IS) and coal was an effective approach to achieve harmless and sustainable utilization of IS. The long-term and stable operation of a co-gasification largely depends on fluidity of coal-ash slag. Herein, the effects of IS addition on the crystallization and viscosity of Shuangmazao (SMZ) coal were investigated by means of high temperature stage coupled with an optical microscope (HTSOM), a scanning electron microscopy coupled with an energy dispersive X-ray spectrometry (SEM-EDS), X-ray diffraction (XRD), a Fourier transform infrared spectrometer (FTIR), and FactSage software. The results showed that when the proportion of IS was less than 60%, with the addition of IS, the slag existed in an amorphous form. This was due to the high content of SiO₂ and Al₂O₃ in SMZ ash and blended ash, which had a high glass-forming ability (GFA). The slag formed at a high temperature had a higher polymerization degree and viscosity, which led to a decrease in the migration ability between ions, and ultimately made the slag difficult to crystallize during the cooling. When the proportion of IS was higher than 60%, the addition of IS increased the CaO and FeO content in the system. As network modifiers, CaO and FeO could provide O²⁻ at a high temperature, which reacted with silicate network structure and continuously destroyed the complexity of network structure, thus reducing the polymerization degree and viscosity of slag. At this time, the migration ability between ions was enhanced, and needle-shaped/rod-shaped crystals were precipitated during the cooling process. Finally, the viscosity calculated by simulation and Einstein-Roscoe empirical formula demonstrated that the addition of IS could significantly improve the fluidity of coal ash and meet the requirements of the liquid slag-tapping gasifier. The purpose of this work was to provide theoretical support for slag flow mechanisms during the gasifier slagging-tapping process and the resource treatment of industrial solid waste.

Keywords

co-gasification / industrial sludge / crystallization / viscosity / mineral matter evolution

参考文献

[1] Rulkens W. Sewage sludge as a biomass resource for the production of energy: overview and assessment of the various options. Energy & Fuels, 2008, 22(1): 9–15

[2] Goswami R, Das R. Waste heat recovery from a biomass heat engine for thermoelectric power generation using two-phase thermosyphons. Renewable Energy, 2020, 148: 1280–1291

[3] Goswami R, Das R. Energy cogeneration study of red mulberry (Morus rubra)-based biomass. Energy Sources. Part A, Recovery, Utilization, and Environmental Effects, 2020, 42(8): 979–1000

[4] Kijo-Kleczkowska A, Środa K, Kosowska-Golachowska M. . Experimental research of sewage sludge with coal and biomass co-combustion, in pellet form. Waste Management (New York, N.Y.), 2016, 53: 165–181

[5] Deng N, Li D Y, Zhang Q. . Simulation analysis of municipal solid waste pyrolysis and gasification based on Aspen plus. Frontiers in Energy, 2019, 13(1): 64–70

[6] Yue G, Lyu J, Li S. Clean and highly-efficient utilization of coal. Frontiers in Energy, 2021, 15(1): 1–3

[7] Wang L, Skjevrak G, Hustad J E. . Sintering characteristics of sewage sludge ashes at elevated temperature. Fuel Processing Technology, 2012, 96: 88–97

[8] Folgueras M B, Alonso M, Folgueras J R. Effect of sludge addition to coal on Na, K and S volatilisation in ashing process and ash fusibility. Fuel Processing Technology, 2015, 138: 714–723

[9] Stickler D B, Gannon R E. Slag-coated wall structure technology for entrained flow gasifiers. Fuel Processing Technology, 1983, 7(3): 225–238

[10] Alam M T, Dai B, Wu X. . A critical review of ash slagging mechanisms and viscosity measurement for low-rank coal and bio-slags. Frontiers in Energy, 2021, 15(1): 46–67

[11] Xue Z, Guo Q, Gong Y. . In-situ atomization and flame characteristics of coal water slurry in an impinging entrained-flow gasifier. Chemical Engineering Science, 2018, 190: 248–259

[12] Yan T, Bai J, Kong L. . Effect of SiO₂/Al₂O₃ on fusion behavior of coal ash at high temperature. Fuel, 2017, 193: 275–283

[13] Link S, Yrjas P, Hupa L. Ash melting behaviour of wheat straw blends with wood and reed. Renewable Energy, 2018, 124: 11–20

[14] Zhang L, Wang J, Song X. . Influence of biomass ash additive on fusion characteristics of high-silicon-aluminum coal ash. Fuel, 2020, 282: 118876

[15] Wang J, Liu X, Guo Q. . Application of biomass leachate in regulating the fusibility of coal ash. Fuel, 2020, 268: 117338

[16] Ninomiya Y, Sato A. Ash melting behavior under coal gasification conditions. Energy Conversion and Management, 1997, 38(10-13): 1405–1412

[17] Hsieh P Y. Viscous deformation as a measure of heat work during coal ash fusibility testing. Fuel, 2020, 281: 118723

[18] Bryant G W, Lucas J A, Gupta S K. . Use of thermomechanical analysis to quantify the flux additions necessary for slag flow in slagging gasifiers fired with coal. Energy & Fuels, 1998, 12(2): 257–261

[19] Zhang L, Wei J, Wang J. . Deep insight into the ash fusibility and viscosity fluctuation behavior during co-gasification of coal and indirect coal liquefaction residue. Fuel, 2021, 305: 121620

[20] Cao X, Kong L, Bai J. . Influence of water vapor on continuous cooling crystallization characteristics of coal ash slag. Fuel, 2021, 303: 121241

[21] He C, Bai J, Kong L. . Effects of atmosphere on the oxidation state of iron and viscosity behavior of coal ash slag. Fuel, 2019, 243: 41–51

[22] Li F, Zhao C, Li J. . Investigation on ash fusion behavior modification of wheat straw by sludge addition. Journal of the Energy Institute, 2021, 98: 1–10

[23] Li W, Li M, Li W. . Study on the ash fusion temperatures of coal and sewage sludge mixtures. Fuel, 2010, 89(7): 1566–1572

[24] Schwitalla D, Reinmöller M, Forman C. . Ash and slag properties for co-gasification of sewage sludge and coal: an experimentally validated modeling approach. Fuel Processing Technology, 2018, 175: 1–9

[25] Folgueras M B, Alonso M, Folgueras J R. Modification of lignite ash fusion temperatures by the addition of different types of sewage sludge. Fuel Processing Technology, 2015, 131: 348–355

[26] Li M, Li F, Liu Q. . Regulation of ash fusibility for high ash-fusion-temperature (AFT) coal by industrial sludge addition. Fuel, 2019, 244: 91–103

[27] Wall T F, Creelman R A, Gupta R P. . Coal ash fusion temperatures-new characterization techniques, and implications for slagging and fouling. Progress in Energy and Combustion Science, 1998, 24(4): 345–353

[28] Gong X, Lu W, Guo X. . Pilot-scale comparison investigation of different entrained-flow gasification technologies and prediction on industrial-scale gasification performance. Fuel, 2014, 129: 37–44

[29] van Dyk J C, Waanders F B, Benson S A. . Viscosity predictions of the slag composition of gasified coal, utilizing FactSage equilibrium modelling. Fuel, 2009, 88(1): 67–74

[30] Safronov D, Förster T, Schwitalla D. . Numerical study on entrained-flow gasification performance using combined slag model and experimental characterization of slag properties. Fuel Processing Technology, 2017, 161: 62–75

[31] Míguez J L, Porteiro J, Behrendt F. . Review of the use of additives to mitigate operational problems associated with the combustion of biomass with high content in ash-forming species. Renewable & Sustainable Energy Reviews, 2021, 141: 110502

[32] Wang Y, Li L, An Q. . Investigation on ash fusion temperature and slagging characteristic of Zhundong coal blends, part 1: the effect of two solid wastes from calcium carbide production. Fuel Processing Technology, 2022, 228: 107138

[33] Wu G, Seebold S, Yazhenskikh E. . Viscosity model for oxide melts relevant to fuel slags. Part 3: the iron oxide containing low order systems in the system SiO₂-Al₂O₃-CaO-MgO-Na₂O-K₂O-FeO-Fe₂O₃. Fuel Processing Technology, 2018, 171: 339–349

[34] Duchesne M A, Bronsch A M, Hughes R W. . Slag viscosity modeling toolbox. Fuel, 2013, 114: 38–43

[35] Zhou J, Shen Z, Liang Q. . A new prediction method for the viscosity of the molten coal slag. Part 2: the viscosity model of crystalline slag. Fuel, 2018, 220: 233–239

[36] Cao X, Kong L, Bai J. . Effect of water vapor on coal ash slag viscosity under gasification condition. Fuel, 2019, 237: 18–27

[37] Zhang L, Wang J, Wei J. . Synergistic effects of CaO and MgO on ash fusion characteristics in entrained-flow gasifier. Energy & Fuels, 2021, 35(1): 425–432

[38] Cao X, Peng B, Kong L. . Flow properties of ash and slag under co-gasification of coal and extract residue of direct coal liquefaction residue. Fuel, 2020, 264: 116850

[39] Xing X, Pang Z, Mo C. . Effect of MgO and BaO on viscosity and structure of blast furnace slag. Journal of Non-Crystalline Solids, 2020, 530: 119801

[40] Gao J, Wen G, Huang T. . Effects of the composition on the structure and viscosity of the CaO-SiO2-based mold flux. Journal of Non-Crystalline Solids, 2016, 435: 33–39

[41] Chen X, Kong L, Bai J. . The key for sodium-rich coal utilization in entrained flow gasifier: the role of sodium on slag viscosity-temperature behavior at high temperatures. Applied Energy, 2017, 206: 1241–1249

[42] Kondratiev A, Ilyushechkin A. Flow behaviour of crystallising coal ash slags: shear viscosity, non-Newtonian flow and temperature of critical viscosity. Fuel, 2018, 224: 783–800

[43] Ge Z, Kong L, Bai J. . Crystallization kinetics and T_CV prediction of coal ash slag under slag tapping conditions in an entrained flow gasifier. Fuel, 2020, 272: 117723

[44] Frandsen F, Dam-Johansen K, Rasmussen P. Trace elements from combustion and gasification of coal-an equilibrium approach. Progress in Energy and Combustion Science, 1994, 20(2): 115–138

[45] Xuan W, Whitty K J, Guan Q. . Influence of SiO₂/Al₂O₃ on crystallization characteristics of synthetic coal slags. Fuel, 2015, 144: 103–110

[46] Zhou H, Xing Y, Zhou M. Effects of modified Kaolin adsorbents on sodium adsorption efficiency and ash fusion characteristics during Zhundong coal combustion. Journal of the Energy Institute, 2021, 97: 203–212

[47] Xie L, Lv Y, Xu L. The influence of the high potassium biomass on the ash fusion characteristics of coal. Journal of the Energy Institute, 2021, 95: 52–60

[48] Cao X, Kong L, Bai J. . Measurement and simulation of viscosity characteristics of coal ash slag under water vapor condition in coal gasification. Fuel, 2022, 308: 121882

Acknowledgments

This work was supported by the project of Key Research Plan of Ningxia (2019BEB04030 and 2019BCH01001), and the project of CHN Energy Ningxia Coal Industry Co., Ltd. (NXMY2112).

版权

2022 Higher Education Press 2022