Effect of graphene and its derivatives on thermo-mechanical properties of phase change materials and its applications: a comprehensive review

Abstract

Phase change materials (PCMs) play a leading role in overcoming the growing need of advanced thermal management for the storage and release of thermal energy which is to be used for different solar applications. However, the effectiveness of PCMs is greatly affected by their poor thermal conductivity. Therefore, in the present review the progress made in deploying the graphene (Gr) in PCMs in the last decade for providing the solution to the aforementioned inadequacy is presented and discussed in detail. Gr and its derivatives ((Gr oxide (GO), Gr aerogel (GA) and Gr nanoplatelets (GNPs)) based PCMs can improve the thermal conductivity and shape stability, which may be attributed to the extra ordinary thermo-physical properties of Gr. Moreover, it is expected from this review that the advantages and disadvantages of using Gr nanoparticles provide a deep insight and help the researchers in finding out the exact basic properties and finally the applications of Gr can be enhanced.

In this work, Gr and its derivatives based PCMs was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction spectroscopy (XRD), and scanning electron microscopy (SEM) by which crystal structure was known, phase was identified along with the knowledge of surface structure respectively. The increase in the mass fraction (%) of the filler (Gr and its derivatives) led to even better thermo-physical properties and thermal stability. The thermal characterization was also done by differential scanning calorimetry (DSC), thermo gravimetric analysis (TGA) and thermal conductivity tests. The enthalpy of freezing and melting showed that Gr and its derivatives based PCMs had a very high energy storage capability as reflected in its various applications.

Keywords

phase change materials (PCMs) / graphene / thermal conductivity / characterization

参考文献

[1] Wuttig M, Bhaskaran H, Taubner T. Phase-change materials for non-volatile photonic applications. Nature Photonics, 2017, 11(8): 465–476

[2] Lencer D, Salinga M, Wuttig M. Design rules for phase-change materials in data storage applications. Advanced Materials, 2011, 23(18): 2030–2058

[3] Pielichowska K, Pielichowski K. Phase change materials for thermal energy storage. Progress in Materials Science, 2014, 65: 67–123

[4] Zhu Z, Evans P G, Haglund R F Jr, Dynamically reconfigurable metadevice employing nanostructured phase-change materials. Nano Letters, 2017, 17(8): 4881–4885

[5] McCann J T, Marquez M, Xia Y. Melt coaxial electrospinning: a versatile method for the encapsulation of solid materials and fabrication of phase change nanofibers. Nano Letters, 2006, 6(12): 2868–2872

[6] Zdraveva E, Fang J, Mijovic B, Electrospun poly(vinyl alcohol)/phase change material fibers: morphology, heat properties, and stability. Industrial & Engineering Chemistry Research, 2015, 54(35): 8706–8712

[7] Cho H J,, Preston D J, Zhu Y, Nanoengineered materials for liquid–vapour phase-change heat transfer. Nature Reviews. Materials, 2017, 2(2): 16092

[8] Fallahi A, Guldentops G, Tao M, Review on solid-solid phase change materials for thermal energy storage: molecular structure and thermal properties. Applied Thermal Engineering, 2017, 127: 1427–1441

[9] Ke H. Investigation of the effects of nano-graphite on morphological structure and thermal performances of fatty acid ternary eutectics/polyacrylonitrile/nano-graphite form-stable phase change composite fibrous membranes for thermal energy storage. Solar Energy, 2018, 173: 1197–1206

[10] Liu C, Li F, Ma L, Advanced materials for energy storage. Advanced Materials, 2010, 22(8): E28–E62

[11] Singh R P, Sharma K, Mausam K. Dispersion and stability of metal oxide nanoparticles in aqueous suspension: a review. Materials Today: Proceedings, 2020, 26: 2021–2025

[12] Kant K, Shukla A, Sharma A. Advancement in phase change materials for thermal energy storage applications. Solar Energy Materials and Solar Cells, 2017, 172: 82–92

[13] Graham M, Coca-Clemente J A, Shchukina E, Nanoencapsulated crystallohydrate mixtures for advanced thermal energy storage. Journal of Materials Chemistry A, Materials for Energy and Sustainability, 2017, 5(26): 13683–13691

[14] Vélez C, Khayet M, Ortiz de Zárate J M. Temperature-dependent thermal properties of solid/liquid phase change even-numbered n-alkanes: n-hexadecane, n-octadecane and n-eicosane. Applied Energy, 2015, 143: 383–394

[15] Mohamed S A, Al-Sulaiman F A, Ibrahim N I, A review on current status and challenges of inorganic phase change materials for thermal energy storage systems. Renewable & Sustainable Energy Reviews, 2017, 70: 1072–1089

[16] Joybari M M, Haghighat F, Seddegh S. Natural convection characterization during melting of phase change materials: development of a simplified front tracking method. Solar Energy, 2017, 158: 711–720

[17] Amaral C, Vicente R, Marques P A A P, Phase change materials and carbon nanostructures for thermal energy storage: a literature review. Renewable & Sustainable Energy Reviews, 2017, 79: 1212–1228

[18] Bharadwaj G, Sharma K, Tiwari A K. Performance analysis of hybrid PCM by doping Graphene. Materials Today: Proceedings, 2020, 26: 850–853

[19] Alva G, Lin Y, Liu L, Synthesis, characterization and applications of microencapsulated phase change materials in thermal energy storage: a review. Energy and Building, 2017, 144: 276–294

[20] Jamekhorshid A, Sadrameli S M, Farid M. A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium. Renewable & Sustainable Energy Reviews, 2014, 31: 531–542

[21] Su W, Darkwa J, Kokogiannakis G. Review of solid-liquid phase change materials and their encapsulation technologies. Renewable & Sustainable Energy Reviews, 2015, 48: 373–391

[22] Song S, Dong L, Qu Z, Microencapsulated capric-stearic acid with silica shell as a novel phase change material for thermal energy storage. Applied Thermal Engineering, 2014, 70(1): 546–551

[23] Sarı A, Alkan C, Karaipekli A, Microencapsulated n-octacosane as phase change material for thermal energy storage. Solar Energy, 2009, 83(10): 1757–1763

[24] Sarı A, Alkan C, Karaipekli A. Preparation, characterization and thermal properties of PMMA/n-heptadecane microcapsules as novel solid-liquid micro PCM for thermal energy storage. Applied Energy, 2010, 87(5): 1529–1534

[25] Graham M, Shchukina E, de Castro P F, Nanocapsules containing salt hydrate phase change materials for thermal energy storage. Journal of Materials Chemistry A, Materials for Energy and Sustainability, 2016, 4(43): 16906–16912

[26] Sarı A, Alkan C, Bilgin C. Micro/nano encapsulation of some paraffin eutectic mixtures with poly(methyl methacrylate) shell: preparation, characterization and latent heat thermal energy storage properties. Applied Energy, 2014, 136: 217–227

[27] Sarı A, Alkan C, Kahraman Döğüşcü D, Micro/nano-encapsulated n-heptadecane with polystyrene shell for latent heat thermal energy storage. Solar Energy Materials and Solar Cells, 2014, 126: 42–50

[28] Konuklu Y, Paksoy H O, Unal M. Nanoencapsulation of n-alkanes with poly(styrene-co-ethylacrylate) shells for thermal energy storage. Applied Energy, 2015, 150: 335–340

[29] Liu Z, Zhang Y, Hu K, Preparation and properties of polyethylene glycol based semi-interpenetrating polymer network as novel form-stable phase change materials for thermal energy storage. Energy and Building, 2016, 127: 327–336

[30] Zheng Z, Jin J, Xu G, Highly stable and conductive microcapsules for enhancement of joule heating performance. ACS Nano, 2016, 10(4): 4695–4703

[31] Shirin-Abadi A R, Mahdavian A R, Khoee S. New approach for the elucidation of PCM nanocapsules through miniemulsion polymerization with an acrylic shell. Macromolecules, 2011, 44(18): 7405–7414

[32] Sánchez L, Sánchez P, de Lucas A, Microencapsulation of PCMs with a polystyrene shell. Colloid & Polymer Science, 2007, 285(12): 1377–1385

[33] Sarı A, Alkan C, Altıntaş A. Preparation, characterization and latent heat thermal energy storage properties of micro-nanoencapsulated fatty acids by polystyrene shell. Applied Thermal Engineering, 2014, 73(1): 1160–1168

[34] Fan L, Khodadadi J M. Thermal conductivity enhancement of phase change materials for thermal energy storage: a review. Renewable & Sustainable Energy Reviews, 2011, 15(1): 24–46

[35] Zheng Z, Chang Z, Xu G, Microencapsulated phase change materials in solar-thermal conversion systems: understanding geometry-dependent heating efficiency and system reliability. ACS Nano, 2017, 11(1): 721–729

[36] Huang X, Chen X, Li A, Shape-stabilized phase change materials based on porous supports for thermal energy storage applications. Chemical Engineering Journal, 2019, 356: 641–661

[37] Feng L, Wang C, Song P, The form-stable phase change materials based on polyethylene glycol and functionalized carbon nanotubes for heat storage. Applied Thermal Engineering, 2015, 90: 952–956

[38] Schiffres S N, Harish S, Maruyama S, Tunable electrical and thermal transport in ice-templated multilayer graphene nanocomposites through freezing rate control. ACS Nano, 2013, 7(12): 11183–11189

[39] Dreyer D R, Park S, Bielawski C W, The chemistry of graphene oxide. Chemical Society Reviews, 2010, 39(1): 228–240

[40] Mao J, Iocozzia J, Huang J, Graphene aerogels for efficient energy storage and conversion. Energy & Environmental Science, 2018, 11(4): 772–799

[41] Zhou Y, Zheng S, Zhang G. A state-of-the-art-review on phase change materials integrated cooling systems for deterministic parametrical analysis, stochastic uncertainty-based design, single and multi-objective optimisations with machine learning applications. Energy and Building, 2020, 220: 110013

[42] Wong-Pinto L S, Milian Y, Ushak S. Progress on use of nanoparticles in salt hydrates as phase change materials. Renewable & Sustainable Energy Reviews, 2020, 122: 109727

[43] Anupam B R, Sahoo U C, Rath P. Phase change materials for pavement applications: a review. Construction & Building Materials, 2020, 247: 118553

[44] Zhou Y, Zheng S, Zhang G. A review on cooling performance enhancement for phase change materials integrated systems—flexible design and smart control with machine learning applications. Building and Environment, 2020, 174: 106786

[45] Min P, Liu J, Li X, Thermally conductive phase change composites featuring anisotropic graphene aerogels for real-time and fast-charging solar-thermal energy conversion. Advanced Functional Materials, 2018, 28(51): 1805365

[46] Ghosh S, Calizo I, Teweldebrhan D, Extremely high thermal conductivity of graphene: prospects for thermal management applications in nanoelectronic circuits. Applied Physics Letters, 2008, 92(15): 151911

[47] Xin G, Sun H, Scott S M, Advanced phase change composite by thermally annealed defect-free graphene for thermal energy storage. ACS Applied Materials & Interfaces, 2014, 6(17): 15262–15271

[48] Yang J, Jia Y, Bing N, Reduced graphene oxide and zirconium carbide co-modified melamine sponge/paraffin wax composites as new form-stable phase change materials for photothermal energy conversion and storage. Applied Thermal Engineering, 2019, 163: 114412

[49] Kumar K, Sharma K, Verma S, Experimental investigation of graphene-paraffin wax nanocomposites for thermal energy storage. Materials Today: Proceedings, 2019, 18: 5158–5163

[50] Qin M, Xu Y, Cao R, Efficiently controlling the 3D thermal conductivity of a polymer nanocomposite via a hyperelastic double-continuous network of graphene and sponge. Advanced Functional Materials, 2018, 28(45): 1805053

[51] Mu B, Li M. Fabrication and characterization of polyurethane-grafted reduced graphene oxide as solid-solid phase change materials for solar energy conversion and storage. Solar Energy, 2019, 188: 230–238

[52] Zhao Q, He F, Zhang Q, Microencapsulated phase change materials based on graphene Pickering emulsion for light-to-thermal energy conversion and management. Solar Energy Materials and Solar Cells, 2019, 203: 110204

[53] Zhou M, Lin T, Huang F, Highly conductive porous graphene/ceramic composites for heat transfer and thermal energy storage. Advanced Functional Materials, 2013, 23(18): 2263–2269

[54] Zhu Y, Qin Y, Liang S, Graphene/SiO₂/n-octadecane nanoencapsulated phase change material with flower like morphology, high thermal conductivity, and suppressed supercooling. Applied Energy, 2019, 250: 98–108

[55] Xia Y, Zhang H, Huang P, Graphene-oxide-induced lamellar structures used to fabricate novel composite solid-solid phase change materials for thermal energy storage. Chemical Engineering Journal, 2019, 362: 909–920

[56] Wang W, Umair M M, Qiu J, Electromagnetic and solar energy conversion and storage based on Fe₃O₄-functionalised graphene/phase change material nanocomposites. Energy Conversion and Management, 2019, 196: 1299–1305

[57] Li X, Xu G, Peng G, Efficiency enhancement on the solar steam generation by wick materials with wrapped graphene nanoparticles. Applied Thermal Engineering, 2019, 161: 114195

[58] Mu B, Li M. Synthesis of novel form-stable composite phase change materials with modified graphene aerogel for solar energy conversion and storage. Solar Energy Materials and Solar Cells, 2019, 191: 466–475

[59] Zhao G, Feng C, Cheng H, In situ thermal conversion of graphene oxide films to reduced graphene oxide films for efficient dye-sensitized solar cells. Materials Research Bulletin, 2019, 120: 110609

[60] Cao L, Zhang D. Styrene-acrylic emulsion/graphene aerogel supported phase change composite with good thermal conductivity. Thermochimica Acta, 2019, 680: 178351

[61] Zhang Y, Wang K, Tao W, Preparation of microencapsulated phase change materials used graphene oxide to improve thermal stability and its incorporation in gypsum materials. Construction & Building Materials, 2019, 224: 48–56

[62] Feng J, Liu Z, Zhang D, Phase change materials coated with modified graphene-oxide as fillers for silicone rubber used in thermal interface applications. New Carbon Materials, 2019, 34(2): 188–195

[63] Vivekananthan M, Amirtham V A. Characterisation and thermophysical properties of graphene nanoparticles dispersed erythritol PCM for medium temperature thermal energy storage applications. Thermochimica Acta, 2019, 676: 94–103

[64] Zhang Y, Wang J, Qiu J, Ag-graphene/PEG composite phase change materials for enhancing solar-thermal energy conversion and storage capacity. Applied Energy, 2019, 237: 83–90

[65] Liu L, Zheng K, Yan Y, Graphene Aerogels Enhanced Phase Change Materials prepared by one-pot method with high thermal conductivity and large latent energy storage. Solar Energy Materials and Solar Cells, 2018, 185: 487–493

[66] Xue F, Lu Y, Qi X, Melamine foam-templated graphene nanoplatelet framework toward phase change materials with multiple energy conversion abilities. Chemical Engineering Journal, 2019, 365: 20–29

[67] Song X, Cai Y, Wang W, Thermal behavior and shape-stabilization of fatty acid eutectics/electrospun carbon nano-felts composite phase change materials enhanced by reduced graphene oxide. Solar Energy Materials and Solar Cells, 2019, 191: 306–315

[68] Li S, Kong L, Wang H, Thermal performance and shape-stabilization of comb-like polymeric phase change materials enhanced by octadecylamine-functionalized graphene oxide. Energy Conversion and Management, 2018, 168: 119–127

[69] Zou D, Ma X, Liu X, Thermal performance enhancement of composite phase change materials (PCM) using graphene and carbon nanotubes as additives for the potential application in lithium-ion power battery. International Journal of Heat and Mass Transfer, 2018, 120: 33–41

[70] Sze J Y, Mu C, Ayachi F, Highly efficient nanofiller based on carboxylated graphene oxide in phase change materials for cold thermal energy storage. Energy Procedia, 2018, 152: 198–203

[71] Liang K, Shi L, Zhang J, Fabrication of shape-stable composite phase change materials based on lauric acid and graphene/graphene oxide complex aerogels for enhancement of thermal energy storage and electrical conduction. Thermochimica Acta, 2018, 664: 1–15

[72] Chen D, Qin S, Tsui G C P, Fabrication, morphology and thermal properties of octadecylamine-grafted graphene oxide-modified phase-change microcapsules for thermal energy storage. Composites Part B, Engineering, 2019, 157: 239–247

[73] Ramakrishnan S, Wang X, Sanjayan J. Thermal enhancement of paraffin/hydrophobic expanded perlite granular phase change composite using graphene nanoplatelets. Energy and Building, 2018, 169: 206–215

[74] Hussain A, Abidi I H, Tso C Y, Thermal management of lithium ion batteries using graphene coated nickel foam saturated with phase change materials. International Journal of Thermal Sciences, 2018, 124: 23–35

[75] Zhou Y, Liu X, Sheng D, Graphene oxide/polyurethane-based solid-solid phase change materials with enhanced mechanical properties. Thermochimica Acta, 2017, 658: 38–46

[76] Liu X, Rao Z. Experimental study on the thermal performance of graphene and exfoliated graphite sheet for thermal energy storage phase change material. Thermochimica Acta, 2017, 647: 15–21

[77] Liu C, Yu W, Chen C, Remarkably reduced thermal contact resistance of graphene/olefin block copolymer/paraffin form stable phase change thermal interface material. International Journal of Heat and Mass Transfer, 2020, 163: 120393

[78] Cao B, Zou J, Hu G, Enhanced thermal transport across multilayer graphene and water by interlayer functionalization. Applied Physics Letters, 2018, 112(4): 041603

[79] Zou J, Cao B. Phonon thermal properties of graphene on h-BN from molecular dynamics simulations. Applied Physics Letters, 2017, 110(10): 103106

[80] Shahid U B, Abdala A. A critical review of phase change material composite performance through Figure-of-Merit analysis: graphene vs boron nitride. Energy Storage Materials, 2021, 34: 365–387

[81] Li G, Hong G, Dong D, Multiresponsive graphene-aerogel-directed phase-change smart fibers. Advanced Materials, 2018, 30(30): 1801754

[82] Wei X, Xue F, Qi X, Photo- and electro-responsive phase change materials based on highly anisotropic microcrystalline cellulose/graphene nanoplatelet structure. Applied Energy, 2019, 236: 70–80

[83] Li Y, Chen Y, Huang X, Anisotropy-functionalized cellulose-based phase change materials with reinforced solar-thermal energy conversion and storage capacity. Chemical Engineering Journal, 2021, 415: 129086

[84] Tang Y, Jia Y, Alva G, Synthesis, characterization and properties of palmitic acid/high density polyethylene/graphene nanoplatelets composites as form-stable phase change materials. Solar Energy Materials and Solar Cells, 2016, 155: 421–429

[85] Silakhori M, Fauzi H, Mahmoudian M R, Preparation and thermal properties of form-stable phase change materials composed of palmitic acid/polypyrrole/graphene nanoplatelets. Energy and Building, 2015, 99: 189–195

[86] Mehrali M, Tahan Latibari S, Mehrali M, Preparation of nitrogen-doped graphene/palmitic acid shape stabilized composite phase change material with remarkable thermal properties for thermal energy storage. Applied Energy, 2014, 135: 339–349

[87] He L, Wang H, Yang F, Preparation and properties of polyethylene glycol/unsaturated polyester resin/graphene nanoplates composites as form-stable phase change materials. Thermochimica Acta, 2018, 665: 43–52

[88] Li Y, Li Y, Huang X, Graphene-CoO/PEG composite phase change materials with enhanced solar-to-thermal energy conversion and storage capacity. Composites Science and Technology, 2020, 195: 108197

[89] Yu C, Yang S H, Pak S Y, Graphene embedded form stable phase change materials for drawing the thermo-electric energy harvesting. Energy Conversion and Management, 2018, 169: 88–96

[90] Jeon J, Park J H, Wi S, Thermal performance enhancement of a phase change material with expanded graphite via ultrasonication. Journal of Industrial and Engineering Chemistry, 2019, 79: 437–442

[91] Zhou Y, Liu X, Sheng D, Graphene size-dependent phase change behaviors of in situ reduced grapehene oxide/polyurethane-based solid-solid phase change composites. Chemical Physics Letters, 2018, 709: 52–59

[92] Zhou Y, Liu X, Sheng D, Polyurethane-based solid-solid phase change materials with in situ reduced graphene oxide for light-thermal energy conversion and storage. Chemical Engineering Journal, 2018, 338: 117–125

[93] Zhou Y, Wang X, Liu X, Polyurethane-based solid-solid phase change materials with halloysite nanotubes-hybrid graphene aerogels for efficient light- and electro-thermal conversion and storage. Carbon, 2019, 142: 558–566

[94] Yang J, Tang L, Bao R, Hybrid network structure of boron nitride and graphene oxide in shape-stabilized composite phase change materials with enhanced thermal conductivity and light-to-electric energy conversion capability. Solar Energy Materials and Solar Cells, 2018, 174: 56–64

[95] Zhang L, Yang W, Jiang Z, Graphene oxide-modified microencapsulated phase change materials with high encapsulation capacity and enhanced leakage-prevention performance. Applied Energy, 2017, 197: 354–363

[96] Cao R, Liu H, Chen S, Fabrication and properties of graphene oxide-grafted-poly(hexadecyl acrylate) as a solid-solid phase change material. Composites Science and Technology, 2017, 149: 262–268

[97] Heu C S, Kim S W, Lee K S, Fabrication of three-dimensional metal-graphene network phase change composite for high thermal conductivity and suppressed subcooling phenomena. Energy Conversion and Management, 2017, 149: 608–615

[98] Li W, Lai-Iskandar S, Tan D, Thermal conductivity enhancement and shape stabilization of phase-change materials using three-dimensional graphene and graphene powder. Energy & Fuels, 2020, 34(2): 2435–2444

[99] Mayilvelnathan V, Valan Arasu A. Experimental investigation on thermal behavior of graphene dispersed erythritol PCM in a shell and helical tube latent energy storage system. International Journal of Thermal Sciences, 2020, 155: 106446

[100] Aslfattahi N, Saidur R, Arifutzzaman A, Improved thermo-physical properties and energy efficiency of hybrid PCM/graphene-silver nanocomposite in a hybrid CPV/thermal solar system. Journal of Thermal Analysis and Calorimetry, 2020, online, https://doi.org/10.1007/s10973-020-10390-x

[101] Lin Y, Cong R, Chen Y, Thermal properties and characterization of palmitic acid/nano silicon dioxide/graphene nanoplatelet for thermal energy storage. International Journal of Energy Research, 2020, 44(7): 5621–5633

[102] Liao H, Chen W, Liu Y, A phase change material encapsulated in a mechanically strong graphene aerogel with high thermal conductivity and excellent shape stability. Composites Science and Technology, 2020, 189: 108010

[103] Padya B, Ravikiran N, Kali R, High thermal energy storage and thermal conductivity of few-layer graphene platelets loaded phase change materials: a thermally conductive additive for thermal energy harvesting. Energy Storage, 2021, 3(1): e199

[104] Azadmanjiri J, Srivastava V K, Kumar P, Two- and three-dimensional graphene-based hybrid composites for advanced energy storage and conversion devices. Journal of Materials Chemistry A, Materials for Energy and Sustainability, 2018, 6(3): 702–734

[105] Darzi M E, Golestaneh S I, Kamali M, Thermal and electrical performance analysis of co-electrospun-electrosprayed PCM nanofiber composites in the presence of graphene and carbon fiber powder. Renewable Energy, 2019, 135: 719–728

[106] Li C, Xie B, Chen D, Ultrathin graphite sheets stabilized stearic acid as a composite phase change material for thermal energy storage. Energy, 2019, 166: 246–255

[107] Mhike W, Focke W W, MacKenzie J, Stearyl alcohol/palm triple pressed acid-graphite nanocomposites as phase change materials. Thermochimica Acta, 2018, 663: 77–84

[108] Tang Y, Lin Y, Jia Y, Improved thermal properties of stearyl alcohol/high density polyethylene/expanded graphite composite phase change materials for building thermal energy storage. Energy and Building, 2017, 153: 41–49

[109] Saeed R M, Schlegel J P, Castano C, Preparation and enhanced thermal performance of novel (solid to gel) form-stable eutectic PCM modified by nano-graphene platelets. Journal of Energy Storage, 2018, 15: 91–102

[110] Liu S, Han L, Xie S, A novel medium-temperature form-stable phase change material based on dicarboxylic acid eutectic mixture/expanded graphite composites. Solar Energy, 2017, 143: 22–30

[111] Qi G, Yang J, Bao R, Hierarchical graphene foam-based phase change materials with enhanced thermal conductivity and shape stability for efficient solar-to-thermal energy conversion and storage. Nano Research, 2017, 10(3): 802–813

[112] Yu C, Youn J R, Song Y S. Encapsulated phase change material embedded by graphene powders for smart and flexible thermal response. Fibers and Polymers, 2019, 20(3): 545–554

[113] Temel U N, Somek K, Parlak M, Transient thermal response of phase change material embedded with graphene nanoplatelets in an energy storage unit. Journal of Thermal Analysis and Calorimetry, 2018, 133(2): 907–918

[114] Jia S, Zhu Y, Wang Z, Improvement of shape stability and thermal properties of PCM using polyethylene glycol (PEG)/sisal fiber cellulose (SFC)/graphene oxide (GO). Fibers and Polymers, 2017, 18(6): 1171–1179

[115] Zhou Y, Liu Z, Zheng S. Influence of novel PCM-based strategies on building cooling performance. In: Eco-efficient Materials for Reducing Cooling Needs in Buildings and Construction. Amsterdam: Elsevier, 2021: 329–353

[116] Chauhan D S, Quraishi M A, Ansari K R, Graphene and graphene oxide as new class of materials for corrosion control and protection: present status and future scenario. Progress in Organic Coatings, 2020, 147: 105741

[117] Wang J, Song J, Mu X, Optoelectronic and photoelectric properties and applications of graphene-based nanostructures. Materials Today Physics, 2020, 13: 100196

[118] Preston D J, Mafra D L, Miljkovic N, Scalable graphene coatings for enhanced condensation heat transfer. Nano Letters, 2015, 15(5): 2902–2909

[119] Qian M, Li Z, Fan L, Ultra-light graphene tile-based phase-change material for efficient thermal and solar energy harvest. Applied Energy Materials., 2020, 3(6): 5517–5522

[120] Mofijur M, Mahlia T, Silitonga A, Phase change materials (PCM) for solar energy usages and storage: an overview. Energies, 2019, 12(16): 3167

[121] Kumar P, Kumar Singh P, Nagar S, Effect of different concentration of functionalized graphene on charging time reduction in thermal energy storage system. Materials Today: Proceedings, 2021, 44: 146–152

[122] Ge J, Wang Y, Wang H, Thermal properties and shape stabilization of epoxidized methoxy polyethylene glycol composite PCMs tailored by polydopamine-functionalized graphene oxide. Solar Energy Materials and Solar Cells, 2020, 208: 110388

[123] Sharma A, Tyagi V V, Chen C R, Review on thermal energy storage with phase change materials and applications. Renewable & Sustainable Energy Reviews, 2009, 13(2): 318–345

[124] Xu X, Cui H, Memon S A, Development of novel composite PCM for thermal energy storage using CaCl₂·6H₂O with graphene oxide and SrCl₂·6H₂O. Energy and Building, 2017, 156: 163–172

[125] Sayyar M, Weerasiri R R, Soroushian P, Experimental and numerical study of shape-stable phase-change nanocomposite toward energy-efficient building constructions. Energy and Building, 2014, 75: 249–255

[126] Xiao L, Zhao M, Hu H. Study on graphene oxide modified inorganic phase change materials and their packaging behavior. Journal of Wuhan University of Technology (Material Science Edition), 2018, 33(4): 788–792

[127] Prabakaran R, Prasanna Naveen Kumar J, Mohan Lal D, Constrained melting of graphene-based phase change nanocomposites inside a sphere. Journal of Thermal Analysis and Calorimetry, 2020, 139(2): 941–952

[128] Kumar P, Chaudhary D, Varshney P, Critical review on battery thermal management and role of nanomaterial in heat transfer enhancement for electrical vehicle application. Journal of Energy Storage, 2020, 32: 102003

[129] Joseph M, Sajith V. Graphene enhanced paraffin nanocomposite based hybrid cooling system for thermal management of electronics. Applied Thermal Engineering, 2019, 163: 114342

[130] Tariq S L, Ali H M, Akram M A, Experimental investigation on graphene based nanoparticles enhanced phase change materials (GbNePCMs) for thermal management of electronic equipment. Journal of Energy Storage, 2020, 30: 101497

[131] Zhang T, Zhang T, Zhang J, Design of stearic acid/graphene oxide-attapulgite aerogel shape-stabilized phase change materials with excellent thermophysical properties. Renewable Energy, 2021, 165: 504–513

[132] Yuan P, Zhang P, Liang T, Effects of functionalization on energy storage properties and thermal conductivity of graphene/n-octadecane composite phase change materials. Journal of Materials Science, 2019, 54(2): 1488–1501

[133] Wang X, Cheng X, Li Y, Self-assembly of three-dimensional 1-octadecanol/graphene thermal storage materials. Solar Energy, 2019, 179: 128–134

[134] Tu J, Li H, Zhang J, Latent heat and thermal conductivity enhancements in polyethylene glycol/polyethylene glycol-grafted graphene oxide composites. Advanced Composites and Hybrid Materials, 2019, 2(3): 471–480

版权

2021 Higher Education Press