WO₃颗粒改性垂直排列TiO2纳米管阵列用于氢燃料生产

Decoration of vertically aligned TiO₂ nanotube arrays with WO₃ particles for hydrogen fuel production

Abstract

WO₃ decorated photoelectrodes of titanium nanotube arrays (W-oxide TNTAs) were synthesized via a two-step process, namely, electrochemical oxidation of titanium foil and electrodeposition of W-oxide for various interval times of 1, 2, 3, 5, and 20 min to improve the photoelectrochemical performance and the amount of hydrogen generated. The synthesized photoelectrodes were characterized by various characterization techniques. The presence of tungsten in the modified TNTAs was confirmed using energy dispersive X-ray spectroscopy (EDX). Field emission scanning electron microscopy (FESEM) and high resolution transmission electron microscope (HRTEM) proved the deposition of W-oxide as small particles staked up on the surface of the tubes at lower deposition time whereas longer times produced large and aggregate particles to mostly cover the surface of TiO₂ nanotubes. Additionally, the incorporation of WO₃ resulted in a shift of the absorption edge toward visible light as confirmed by UV-Vis diffuse reflectance spectroscopy and a decrease in the estimated band gap energy values hence, modified TNTAs facilitated a more efficient utilization of solar light for water splitting. From the photoelectrochemical measurement data, the optimal photoelectrode produced after 2 min of deposition time improved the photo conversion efficiency and the hydrogen generation by 30% compared to that of the pure TNTA.

Keywords

titanium dioxide nanotube arrays / potentiostaticanodization / electrodeposition method / tungsten oxide / photoelectrochemical water splitting

参考文献

[1] Hunge Y M, Mahadik M A, Moholkar A V, Bhosale C H. Photoelectrocatalytic degradation of oxalic acid using WO₃ and stratified WO₃/TiO₂ photocatalysts under sunlight illumination. Ultrasonics Sonochemistry, 2017, 35(Pt A): 233–242

[2] Van de Krol R, Grätzel M. Photoelectrochemical Hydrogen Production. New York: Springer, 2012

[3] Wydrzynski T J, Hillier W. Molecular Solar Fuels. Cambridge: Royal Society of Chemistry, 2012

[4] Archer M D, Nozik A J. Nanostructured and Photoelectrochemical Systems for Solar Photon Conversion. London: Imperial College Press, 2008

[5] Grätzel M. Photoelectrochemical cells. Nature, 2001, 414(6861): 338–344

[6] Grimes C A, Varghese O K, Ranjan S. Light, Water, Hydrogen: The Solar Generation of Hydrogen by Water Photoelectrolysis. New York: Springer, 2008

[7] Bhattacharyya R, Misra A, Sandeep K C. Photovoltaic solar energy conversion for hydrogen production by alkaline water electrolysis: conceptual design and analysis. Energy Conversion and Management, 2017, 133: 1–13

[8] Viswanathan B, Subramanian V, Lee J S. Materials and Processes for Solar Fuel Production. New York: Springer, 2014

[9] Ge M, Cao C, Huang J, Li S, Chen Z, Zhang K Q, Al-Deyab S S, Lai Y. A review of one-dimensional TiO₂ nanostructured materials for environmental and energy applications. Journal of Materials Chemistry. A, 2016, 4(18): 6772–6801

[10] Pagnout C, Jomini S, Dadhwal M, Caillet C, Thomas F, Bauda P. Role of electrostatic interactions in the toxicity of titanium dioxide nanoparticles toward Escherichia coli. Colloids and Surfaces. B, Biointerfaces, 2012, 92: 315–321

[11] Khataee A, Mansoori G A. Nanostructured Materials Titanium Dioxide Properties, Preparation and applications. Singapore: World Scientific, 2012

[12] Anpo M, Kamat P V. Environmentally Benign Photocatalysts: Applications of Titanium Oxide-Based Materials. London: Springer, 2010

[13] Momeni M M, Ghayeb Y, Ghonchegi Z. Photocatalytic properties of Cr–TiO₂ nanocomposite photoelectrodes produced by electrochemical anodisation of titanium. Surface Engineering, 2016, 32(7): 520–525

[14] Momeni M M, Ghayeb Y. Photoelectrochemical water splitting on chromium-doped titanium dioxide nanotube photoanodes prepared by single-step anodizing. Journal of Alloys and Compounds, 2015, 637: 393–400

[15] Momeni M M, Ghayeb Y. Fabrication, characterization and photoelectrochemical performance of chromium-sensitized titania nanotubes as efficient photoanodes for solar water splitting. Journal of Solid State Electrochemistry, 2016, 20(3): 683–689

[16] Momeni M M. Dye-sensitized solar cell and photocatalytic performance of nanocomposite photocatalyst prepared by electrochemical anodization. Bulletin of Materials Science, 2016, 39(6): 1389–1395

[17] Momeni M M, Ghayeb Y. Fabrication, characterization and photoelectrochemical behavior of Fe–TiO₂ nanotubes composite photoanodes for solar water splitting. Journal of Electroanalytical Chemistry, 2015, 751: 43–48

[18] Momeni M M, Ghayeb Y. Cobalt modified tungsten–titania nanotube composite photoanodes for photoelectrochemical solar water splitting. Journal of Materials Science Materials in Electronics, 2016, 27(4): 3318–3327

[19] Ghayeb Y, Momeni M M. Solar water-splitting using palladium modified tungsten trioxide-titania nanotube photocatalysts. Journal of Materials Science Materials in Electronics, 2016, 27(2): 1805–1811

[20] Momeni M M, Ghayeb Y, Ghonchegi Z. Fabrication and characterization of copper doped TiO₂ nanotube arrays by in situ electrochemical method as efficient visible-light photocatalyst. Ceramics International, 2015, 41(7): 8735–8741

[21] Ge M Z, Cao C Y, Li S H, Tang Y X, Wang L N, Qi N, Huang J Y, Zhang K Q, Al-Deyab S S, Lai Y K. In situ plasmonic Ag nanoparticle anchored TiO₂ nanotube arrays as visible-light-driven photocatalysts for enhanced water splitting. Nanoscale, 2016, 8(9): 5226–5234

[22] Momeni M M, Ghayeb Y. Photoinduced deposition of gold nanoparticles on TiO₂-WO₃ nanotube films as efficient photoanodes for solar water splitting. Applied Physics. A, Materials Science & Processing, 2016, 122(6): 620

[23] Momeni M M, Ghayeb Y. Visible light-driven photoelectrochemical water splitting on ZnO–TiO₂ heterogeneous nanotube photoanodes. Journal of Applied Electrochemistry, 2015, 45(6): 557–566

[24] Momeni M M, Ghayeb Y, Davarzadeh M. Single-step electrochemical anodization for synthesis of hierarchical WO₃–TiO₂ nanotube arrays on titanium foil as a good photoanode for water splitting with visible light. Journal of Electroanalytical Chemistry, 2015, 739: 149–155

[25] Ge M Z, Li S H, Huang J Y, Zhang K Q, Al-Deyab S S, Lai Y K. TiO₂ nanotube arrays loaded with reduced graphene oxide films: facile hybridization and promising photocatalytic application. Journal of Materials Chemistry. A, 2015, 3(7): 3491–3499

[26] Ge M, Li Q, Cao C, Huang J, Li S, Zhang S, Chen Z, Zhang K, Al-Deyab S S, Lai Y. One-dimensional TiO₂ nanotube photocatalysts for solar water splitting. Advancement of Science, 2017, 4(1): 1600152

[27] Beydoun D, Amal R, Low G, McEvoy S. Role of nanoparticles in photocatalysis. Journal of Nanoparticle Research, 1999, 1(4): 439–458

[28] Iliev V, Tomova D, Rakovsky S, Eliyas A, Puma G L. Enhancement of photocatalytic oxidation of oxalic acid by gold modified WO₃/TiO₂ photocatalysts under UV and visible light irradiation. Journal of Molecular Catalysis A Chemical, 2010, 327(1–2): 51–57

[29] Lee W J, Shinde P S, Go G H, Ramasamy E. Ag grid induced photocurrent enhancement in WO₃ photoanodes and their scale-up performance toward photoelectrochemical H₂ generation. International Journal of Hydrogen Energy, 2011, 36(9): 5262–5270

[30] Subash B, Krishnakumar B, Pandiyan V, Swaminathan M, Shanthi M. Synthesis and characterization of novel WO₃ loaded Ag–ZnO and its photocatalytic activity. Materials Research Bulletin, 2013, 48(1): 63–69

[31] Khare C, Sliozberg K, Meyer R, Savan A, Schuhmann W, Ludwig A. Layered WO₃/TiO₂ nanostructures with enhanced photocurrent densities. International Journal of Hydrogen Energy, 2013, 38(36): 15954–15964

[32] Rajeshwar K, McConnell R, Licht S. Solar Hydrogen Generation: Toward a Renewable Energy Future. New York: Springer, 2008

[33] Choi T, Kim J S, Kim J H. Transparent nitrogen doped TiO₂/WO₃ composite films for self-cleaning glass applications with improved photodegradation activity. Advanced Powder Technology, 2016, 27(2): 347–353

[34] Dozzi M V, Marzorati S, Longhi M, Coduri M, Artiglia L, Selli E. Photocatalytic activity of TiO₂-WO₃ mixed oxides in relation to electron transfer efficiency. Applied Catalysis B: Environmental, 2016, 186: 157–165

[35] Srinivasan A, Miyauchi M. Chemically stable WO₃ based thin-film for visible light induced oxidation and superhydrophilicity. Journal of Physical Chemistry C, 2012, 116(29): 15421–15426

[36] Souvereyns B, Elen K, De Dobbelaere C, Kelchtermans A, Peys N, D’Haen J, Mertens M, Mullens S, Van den Rul H, Meynen V, Cool P, Hardy A, Van Bael M K. Hydrothermal synthesis of a concentrated and stable dispersion of TiO₂ nanoparticles. Chemical Engineering Journal, 2013, 223: 135–144

[37] Somasundaram S, Chenthamarakshan C R, de Tacconi N R, Basit N A, Rajeshwar K. Composite WO₃–TiO₂ films: pulsed electrodeposition from a mixed bath versus sequential deposition from twin baths. Electrochemistry Communications, 2006, 8(4): 539–543

[38] Shiyanovskaya I, Hepel M. Bicomponent WO₃/TiO₂ films as photoelectrodes. Journal of the Electrochemical Society, 1999, 146(1): 243–249

[39] Shiyanovskaya I, Hepel M. Decrease of recombination losses in bicomponent WO₃/TiO₂ films photosensitized with cresyl violet and thionine. Journal of the Electrochemical Society, 1998, 145(11): 3981–3985

[40] He T, Ma Y, Cao Y, Hu X, Liu H, Zhang G, Yang W, Yao J. Photochromism of WO₃ colloids combined with TiO₂ nanoparticles. Journal of Physical Chemistry. B, 2002, 106(49): 12670–12676

[41] He Y, Wu Z, Fu L, Li C, Miao Y, Cao L, Fan H, Zou B. Photochromism and size effect of WO₃ and WO₃-TiO₂ aqueous sol. Chemistry of Materials, 2003, 15(21): 4039–4045

[42] Paramasivam I, Nah Y C, Das C, Shrestha N K, Schmuki P. WO₃/TiO₂ nanotubes with strongly enhanced photocatalytic activity. Chemistry (Weinheim an der Bergstrasse, Germany), 2010, 16(30): 8993–8997

[43] Nazari M, Golestani-Fard F, Bayati R, Eftekhari-Yekta B. Enhanced photocatalytic activity in anodized WO₃-loaded TiO₂ nanotubes. Superlattices and Microstructures, 2015, 80: 91–101

[44] Momeni M, Ghayeb Y. Fabrication, characterization and photocatalytic properties of Au/TiO₂-WO₃ nanotubular composite synthesized by photo-assisted deposition and electrochemical anodizing methods. Journal of Molecular Catalysis. A: Chemical, 2016, 417: 107–115

[45] Zhong M, Zhang G, Yang X. Preparation of Ti mesh supported WO₃/TiO₂ nanotubes composite and its application for photocatalytic degradation under visible light. Materials Letters, 2015, 145: 216–218

[46] Ali H, Ismail N, Hegazy A, Mekewi M. A novel photoelectrode from TiO₂-WO₃ nanoarrays grown on FTO for solar water splitting. Electrochimica Acta, 2014, 150: 314–319

[47] de Tacconi N R, Chenthamarakshan C R, Rajeshwar K, Pauporté T, Lincot D. Pulsed electrodeposition of WO₃–TiO₂ composite films. Electrochemistry Communications, 2003, 5(3): 220–224

[48] Ruan C, Paulose M, Varghese O K, Mor G K, Grimes C A. Fabrication of highly ordered TiO₂ nanotube arrays using an organic electrolyte. Journal of Physical Chemistry. B, 2005, 109(33): 15754–15759

[49] Ali H, Ismail N, Mekewi M, Hengazy A C. Facile one-step process for synthesis of vertically aligned cobalt oxide doped TiO₂ nanotube arrays for solar energy conversion. Journal of Solid State Electrochemistry, 2015, 19(10): 3019–3026

[50] Ma J, Yang M, Sun Y, Li C, Li Q, Gao F, Yu F, Chen J. Fabrication of Ag/TiO₂ nanotube array with enhanced photocatalytic degradation of aqueous organic pollutant. Physica E, Low-Dimensional Systems and Nanostructures, 2014, 58: 24–29

[51] Li Y, Yu H, Zhang C, Song W, Li G, Shao Z, Yi B. Effect of water and annealing temperature of anodized TiO₂ nanotubes on hydrogen production in photoelectrochemical cell. Electrochimica Acta, 2013, 107: 313–319

[52] Xie K, Sun L, Wang C, Lai Y, Wang M, Chen H, Lin C. Photoelectrocatalytic properties of Ag nanoparticles loaded TiO₂ nanotube arrays prepared by pulse current deposition. Electrochimica Acta, 2010, 55(24): 7211–7218

[53] Bai S, Liu H, Sun J, Tian Y, Chen S, Song J, Luo R, Li D, Chen A, Liu C C. Improvement of TiO₂ photocatalytic properties under visible light by WO₃/TiO₂ and MoO₃/TiO₂ composites. Applied Surface Science, 2015, 338: 61–68

[54] Smith Y R, Sarma B, Mohanty S K, Misra M. Formation of TiO₂–WO₃ nanotubular composite via single-step anodization and its application in photoelectrochemical hydrogen generation. Electrochemistry Communications, 2012, 19: 131–134

[55] Palmas S, Castresana P A, Mais L, Vacca A, Mascia M, Ricci P C. TiO₂–WO₃ nanostructured systems for photoelectrochemical applications. RSC Advances, 2016, 6(103): 101671–101682

[56] Yoong L S, Chong F K, Dutta B K. Development of copper-doped TiO₂ photocatalyst for hydrogen production under visible light. Energy, 2009, 34(10): 1652–1661

[57] Kuvarega A T, Krause R W M, Mamba B B. Multiwalled carbon nanotubes decorated with nitrogen, palladium co-doped TiO₂ (MWCNT/N, Pd co-doped TiO₂) for visible light photocatalytic degradation of Eosin Yellow in water. Journal of Nanoparticle Research, 2012, 14(4): 776–791

[58] Kubelka P, Munk F. A contribution to the look of the paints. Journal of Technical Physics, 1931, 12: 593–601

[59] Riboni F, Bettini L G, Bahnemann D W, Selli E. WO₃-TiO₂ vs. TiO₂ photocatalysts: effect of the W precursor and amount on the photocatalytic activity of mixed oxides. Catalysis Today, 2013, 209: 28–34

[60] Park J H, Park O O, Kim S. Photoelectrochemical water splitting at titanium dioxide nanotubes coated with tungsten trioxide. Applied Physics Letters, 2006, 89(16): 163106

Acknowledgments

This work was supported by the Science and Technology Development Fund (STDF) of Egypt (project number 3649).

版权

2018 Higher Education Press and Springer-Verlag GmbH Germany, part of Springer Nature