Numerical study of internal flow field and flow passage improvement of an inlet particle separator

Numerical study of internal flow field and flow passage improvement of an inlet particle separator

Abstract

By performing gas flow field numerical simulations for several inlet Reynolds numbers Re (from 2 × 10⁵ to 9 × 10⁵) and byflow ratios x (from 10% to 20%), the present study has proposed to improve the flow passage of an inlet particle separator. An adjacent objective of the study is to lower pressure losses of the inlet particle separator (IPS). No particle has been included in the gas flow for a k-epsilon turbulence model. The velocity distribution in different sections and the pressure coefficient C_p along the duct have been analyzed, which indicates that there exist important low-velocity regions and vortices in the separation area. Therefore, the profile of streamlines along the original passage has been considered. This profile illustrated a vacuum region in the same area. All investigations suggest that the separation area is the most critical one for fulfilling the objective on pressure losses limitation. Then the flow passage improvement method has focused on the separation area. An improved shape has been designed in order to suit smoothly to the streamlines in this region. Similar numerical studies as those for the original shape have been conducted on this improved shape, confirming some considerable enhancements compared with the original shape. The significant vortices which appear in the original shape reduce in amount and size. Besides, pressure losses are greatly decreased in both outlets (up to 30% for high Reynolds number) and the flow is uniform at the main outlet. Subsequent engineering surveys could rely on expressions obtained for C_p in both outlets which extend the pressure losses for a wide range of inlet Reynolds numbers. As a result, the numerical calculations demonstrate that the flow passage improvement method applied in this study has succeeded in designing a shape which enhances the flow behavior.

Keywords

streamlines / pressure losses / flow passage improvement / inlet particle separator (IPS)

参考文献

[1] Dulac F, Tanre D, Bergametti G, Buat-Menard P, Desbois M, Sutton D. Assessment of the African airborne dust mass over the Western Mediterranean sea using Meteosat data. Journal of Geophysical Research, 1992, 97(2): 2489-2506

[2] Moroianu D, Karlsson A, Fuchs L. LES of the flow and particle ingestion into an air intake of a jet engine running on the ground. ASME Turbo Expo 2004: Power for Land, Sea, and Air, 2004, Paper No. GT2004-53762

[3] Hamed A, Tabakoff W, Wenglarz R V. Erosion and deposition in turbomachinery. Journal of Propulsion and Power, 2006, 22(2): 350-360

[4] Tabakoff W. Review turbomachinery performance deterioration exposed to solid particulate environment. ASME Journal of Fluids Engineering, 1984, 106(2): 125-134

[5] Walsh W S, Thole K A, Joe C. Effects of sand ingestion on the blockage of film-cooling holes. ASME Turbo Expo 2006: Power for Land, Sea, and Air, 2006, Paper No. GT2006-90067

[6] Cardwell N D, Thole K A, Burd S W. Investigation of sand blocking within impingement and film-cooling holes. Journal of Turbomachinery, 2010, 132(2): 021020-1-10

[7] Vittal B V R, Tipton D L, Bennett W A. Development of an advanced vaneless inlet particle separator for helicopter engines. AIAA/SAE/ASME/ASEE 21st Joint Propulsion Conference. Monterey, CA, USA, 1985, Paper No. AIAA 85-1277

[8] Shieh C F, Delaney R A, Tipton D L. Analysis of the flow field in an engine inlet particle separator. In: Computation of Internal Flows: Methods and Applications. American Society of Mechanical Engineers FED, 1984, 14: 23-28

[9] Zedan M, Mostafa A, Hartman P. Viscous flow analysis of advanced particle separators. Journal of Propulsion and Power, 1992, 8(4): 843-848

[10] Hamed A, Jun Y D, Yeuan J J. Particle dynamics simulations in inlet separator with experimentally based bounce model. Journal of Propulsion and Power, 1995, 11(2): 230-235

[11] Saeed F, Al-Garni A Z. Analysis method for inertial particle separator. Journal of Aircraft, 2007, 44(5): 1150-1158

[12] Dedoussis V, Chaviaropoulos P, Papailiou K D. A 3-D inverse methodology applied to the design of axisymmetric ducts. In: Proceedings of ASME International Gas Turbine and Aeroengine Congress and Exposition. Cologne, Germany, 1992, ASME Paper 92-GT-290

[13] Fujii K, Takanashi S. Aerodynamic aircraft design methods and their notable applications- Survey of the activity in Japan. In: Dulikravich G.S. ed. Proceedings of International conference on inverse design concepts and optimization in engineering science. Washington, DC, USA, 1991, 31-44

[14] Selig M S, Maughmert M D. Multipoint inverse airfoil design method based on conformal mapping. American Institute of Aeronautics and Astronautics Journal, 1992, 30(5): 1162-1170

[15] Breitman D S, Duek E G, Habashi W G. Analysis of a split-flow inertial particle separator by finite elements. Journal of Aircraft, 1985, 22(2): 135-140

[16] Ghenaiet A, Tan S C. Numerical study of an inlet particle separator. ASME Turbo Expo 2004: Power for Land, Sea and Air, 2004, Paper No. GT2004-54168

[17] Hamed A. Particle dynamics of inlet flow fields with swirling vanes. Journal of Aircraft, 1982, 19(9): 707-712

[18] Richardson D A, Wilkins W, Wilkins W G, Heights C. Moisture and Particle Removing Means for Engines. US Patent 3148043. 1964

[19] Tedstone D, Schaum H, Sanderson J J. Inertial separator. US Patent <patent>3952972</patent>. 1976

[20] Easley S E, Heathco C E, Smith C L. Inlet particle separator with anti-icing means. US Patent 4860534, 1989

[21] Breitman D S, Langenegger H. Inertial particle separator. US Patent <patent>4509962</patent>, 1985

[22] Musgrove G O, Barringer M D, Thole K A, Grover E, Barker J. Computational design of a louver particle separator for gas turbine engines. ASME Turbo Expo 2009: Power for Land, Sea and Air, 2009, Paper No. GT2009-60199

[23] Zhou L X, Soo S L. Gas-solid flow and collection of solids in a cyclone separator. Powder Technology, 1990, 63(1): 45-53

[24] Launder B E, Spalding D B. The numerical computation of turbulent flows. Computer Methods in Applied Mechanics and Engineering, 1974, 3(2): 269-289

[25] Tang L, Wen F, Yang Y, Crowe C T, Chung J N, Troutt T R. Self-organizing particle dispersion mechanism in a plane wake. Physics of Fluids A, 1992, 4(10): 2244-2251

[26] Yang Y, Crowe C T, Chung J N, Troutt T R. Experiments on particle dispersion in a plane wake. International Journal of Multiphase Flow, 2000, 26(10): 1583-1607

[27] Aggarwal S K, Yapo J B, Grinstein F F, Kailasanath K. Numerical simulation of particle transport in planar shear layers. Computers & Fluids, 1996, 25(1): 39-59

版权

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg