Steady-state thermal-hydraulic analysis of SCWR assembly

PDF(177 KB)
PDF(177 KB)
Frontiers in Energy ›› 2008, Vol. 2 ›› Issue (4) : 475-478. DOI: 10.1007/s11708-008-0093-3

Steady-state thermal-hydraulic analysis of SCWR assembly

作者信息 +

Steady-state thermal-hydraulic analysis of SCWR assembly

  • LIU Xiaojing, CHENG Xu
Author information +
History +

Abstract

Among the six gen-IV reactor concepts recommended by the gen-IV international forum (GIF), supercritical water-cooled reactor (SCWR), the only reactor with water as coolant, achieves a high thermal efficiency and, subsequently, has economic advantages over the existing reactors due to its high outlet temperature. A thermal-hydraulic analysis of the SCWR assembly is performed in this paper using the modified COBRA-IV code. Two approaches to reduce the hot channel factor are investigated: decreasing the moderator mass flow and increasing the thermal resistance between moderator channel and its adjacent sub-channels. It is shown that heat transfer deterioration cannot be avoided in SCWR fuel assembly. It is, therefore, highly required to calculate the cladding temperature accurately and to preserve the fuel rod cladding integrity under heat transfer deterioration conditions.

引用本文

导出引用
. Steady-state thermal-hydraulic analysis of SCWR assembly. Frontiers in Energy. 2008, 2(4): 475-478 https://doi.org/10.1007/s11708-008-0093-3

参考文献

1. Oka Y . Reviewof high temperature water and steam cooled reactor concepts. Proc. of SCR-2000, Tokyo, 2000, 37–57
2. Cheng X, Schulenberg T, Bittermann D . Design analysis of core assemblies for supercriticalpressure conditions. Nuclear Engineeringand Design, 2003, 223(3): 279–294. doi:10.1016/S0029-5493(03)00059-1
3. Yamagata K, Nishikawa K, Hasegawa S . Forced convection heat transfer to supercritical waterflowing in tubes. Int J Heat Mass Transfer, 1972, 15(12): 2575–2593. doi:10.1016/0017-9310(72)90148-2
4. Steward C W, Wheeler C L, Cena R J . COBRA-IV-I: The Model and the Method. BNWL-2214, NRC-4. Pacific Northwest Laboratories, 1977
5. Wagner W, Kruse A . The industrial standard IAPWS-IF97 for the thermodynamic properties and supplementary equationsfor other properties. Properties of Waterand Steam. Springer, Heidelberg, 1997, 55–68
6. Cheng X, Schulenberg T . Heat Transfer at SupercriticalPressures-Literature Review and Application to an HPLWR. Scientific Report FZKA 6609, 2001
PDF(177 KB)

Accesses

Citation

Detail

段落导航
相关文章

/