Impingement of hollow cone spray on hot porous medium

Impingement of hollow cone spray on hot porous medium

Abstract

To have a good understanding of the formation of homogenous mixture in a porous medium engine, the interaction between hollow cone spray and hot porous medium was studied numerically by using an improved version of KIVA-3V code. The improved KIVA-3V code is incorporated with an impingement model, heat transfer model and linearized instability sheet atomization (LISA) model to simulate the hollow cone spray. The reasonability of the impingement model and heat transfer model was validated. With a simple model to describe the structure of the porous medium, the interaction between hollow cone spray and hot porous medium was simulated under different ambient pressures and spray cone angles. Computational results show that the fuel spray could be divided into smaller ones, which provides conditions for the quick evaporation of fuel droplets and the mixing of fuel vapor with air. Differences in ambient pressure and spray cone angle affect the distribution of droplets in the porous medium.

参考文献

1. Durst F, Weclas M . A new type of internal combustionengine based on the porous-medium combustion technique. Proc Inst Mech Eng, 2001, 215(1): 63–81
2. Leidenfrost J G . De aquae communis nonnullis qualitatibus tractatus. Int J Heat Mass Transfer, 1966, 15(9): 1153–1166. doi:10.1016/0017‐9310(66)90111‐6
3. Wachters L H J, Bonne H, van Nouhuis H J . The heat transfer from a hot horizontal plate to sessilewater drops in the spheroidal state. ChemEng Sci, 1966, 21(8): 923–936. doi:10.1016/0009‐2509(66)85086‐8
4. Wachters L H J, Westerling N A J . The heat transfer from ahot wall to impinging water drops in the spheroidal state. Chem Eng Sci, 1966, 21(10): 1047–1056. doi:10.1016/0009‐2509(66)85100‐X
5. Senda J, Kobayashi M, Iwashita S . Modeling of diesel spray impingement on a flat wall.SAE, Paper No.941894. 1994
6. Martynenko V V, Echigo R, Yoshida H . Mathematical model of self-sustaining combustion in inertporous medium with phase change under complex heat transfer. International Journal of Heat Mass Transfer, 1998, 41(1): 117–126. doi:10.1016/S0017‐9310(97)00088‐4
7. Park C-W . Massoud Kaviany. Evaporation-combustion affected by in-cylinder,reciprocating porous regenerator.Journalof Heat Transfer, 2002, 124(1): 184–194. doi:10.1115/1.1418368
8. Senecal P K, Schmidt P D, Noua I . Modeling high speed Viscous sheet atomization. International Journal of Multiphase Flow, 1999, 25(6/7): 1073–1097. doi:10.1016/S0301‐9322(99)00057‐9
9. Schmidt D P, Nouar I, Senecal P K . Pressure swirl aomization in the near field. SAE Trans J Engines, 1999, 108(3): 471–484
10. Naber J D, Reitz R D . Modeling engine spray/wallimpingement. SAE, Paper No.941894. 1994
11. Sommerfeld M, Mundo C, Tropea C . Droplet-wall collisions: experimental studies of thedeformation and breakup process. InternationalJournal of Multiphase Flow, 1995, 21(2): 151–173. doi:10.1016/0301‐9322(94)00069‐V
12. Amsden A A . KIVA-3V: a block-structured KIVA program for engines with verticalor canted valves. Los Alamos National LaboratoryReport LA-13313-MS, 1997