Simulation study on delay of end-to-end data communication for protective relaying in substations

Expand
  • School of Electrical and Electronic Information Engineering, North China Electric Power University

Published date: 05 Jun 2008

Abstract

The end-to-end delay of protective relaying data flow in a substation was studied by dynamic simulation modeling technology. The distribution characteristics of protective relaying data flow and the constitution of the end-to-end delay of messages were analyzed. The simulation model for digital communication between protective relaying equipment and monitoring equipment of interval layer was suggested. The end-to-end delay of protective relaying data flow in different network configurations was analyzed. It is found that the size and interval of the data frame, utilization of the link background and protocols of higher layer are key factors of real-time performance. Detailed analysis results are presented. A proposal for network configuration is suggested to reduce end-to-end delay of protective relaying data flow.

Cite this article

GAO Huisheng, JIN Weiwei, LIU Guang . Simulation study on delay of end-to-end data communication for protective relaying in substations[J]. Frontiers of Electrical and Electronic Engineering, 2008 , 3(2) : 246 -250 . DOI: 10.1007/s11460-008-0044-0

References

1. Wu Z J Hu M Q Du Y S Analysis of realtime performance of communication networkin substationsAutomations of Electric PowerSystems 2005 29(8)4549(in Chinese)
2. Tengdin J T Simon M S Sufana C R LAN congestion scenario and performance evaluationIn: Proceedings of IEEE Power Engineering SocietyWinter Meeting 1999 919924
3. Skeie T Johannessen S Brunner C Ethernet in substation automationIEEE Control Systems Magazine 2002 22(3)4351. doi:10.1109/MCS.2002.1003998
4. Sun J P Sheng W X Wang S A Study on the new substation automation network communicationsystemProceedings of the Chinese Societyfor Electrical Engineering 2003 23(3)1619(in Chinese)
5. Han X T Nie Y X Yin X G Research on substation secondary circuit communicationsystem using OPNET simulatorPower SystemTechnology 2005 29(6)6771, 77 (in Chinese)
6. IEC 61850. Communication Networks and Systemin Substations, Part5 2002
7. Fu Q C Internalcommunication network in substation automation systemJournal of Electrical & Electronic Education 2004 26(5)6365 (in Chinese)
Outlines

/