%A Xinxiang Cao, Tengteng Lyu, Wentao Xie, Arash Mirjalili, Adelaide Bradicich, Ricky Huitema, Ben W.-L. Jang, Jong K. Keum, Karren More, Changjun Liu, Xiaoliang Yan %T Preparation and investigation of Pd doped Cu catalysts for selective hydrogenation of acetylene %0 Journal Article %D 2020 %J Front. Chem. Sci. Eng. %J Frontiers of Chemical Science and Engineering %@ 2095-0179 %R 10.1007/s11705-019-1822-3 %P 522-533 %V 14 %N 4 %U {https://journal.hep.com.cn/fcse/EN/10.1007/s11705-019-1822-3 %8 2020-08-15 %X

A series of PdCu bimetallic catalysts with low Cu and Pd loadings and different Cu: Pd atomic ratios were prepared by conventionally sequential impregnation (CSI) and modified sequential impregnation (MSI) of Cu and Pd for selective hydrogenation of acetylene. Characterization indicates that the supported copper (II) nitrate in the PdCu bimetallic catalysts prepared by MSI can be directly reduced to Cu metal particles due to the hydrogen spillover from Pd to Cu(NO3)2 crystals. In addition, for the catalysts prepared by MSI, Pd atoms can form PdCu alloy on the surface of metal particles, however, for the catalysts prepared by CSI, Pd tends to migrate and exist below the surface layer of Cu. Reaction results indicate that compared with CSI, the MSI method enables samples to possess preferable stability as well as comparable reaction activity. This should be due to the MSI method in favor of the formation of PdCu alloy on the surface of metal particles. Moreover, even Pd loading is super low, <0.045 wt-% in this study, by through adjusting Cu loading to an appropriate value, attractive reactivity and selectivity still can be achieved.