Frontiers of Chemical Science and Engineering >

2009 , Vol. 3 >Issue 4: 357 - 362

DOI: https://doi.org/10.1007/s11705-009-0245-y

Research articles

Investigation of nanostructure of konjac-based water absorbents with atomic force microscopy

Expand
  • 1.Institute for Farm Products Processing and Nuclear-Agricultural Technology, Hubei Academy of Agricultural Sciences, Wuhan 430064, China; 2.Biosystems Engineering Department, Auburn University, 200 Tom E. Corley Building, Auburn, AL 36849-5417, USA;

Published date: 05 Dec 2009

Fold

Abstract

Atomic force microscopy technology is gradually spreading to almost all aspects, including food science and technology, since it was first invented in 1986. In this study, this powerful instrument was applied to image nanostructures of three water absorbents—original konjac powder, konjac powder grafted with acrylic acid using 60Co γ-irradiation and regenerated grafted powder. Water absorption capacities and the rates of the three absorbents were also determined in this work. Original konjac powder could only absorb 60 times (w/w) of water, while 270 times for the grafted absorbent and 360 times for the regenerated absorbent. The initial water absorption rates in both tap and distilled water were high, but the rate decreased steeply as time elapsed. After 20min, the absorbent was close to saturated status. These physical properties were in accordance with the nanostructures of these three water absorbents.

Cite this article

Shengrong GENG, Ruotai LIN, Mingli CHEN, Shaoyang LIU, Yifen WANG, . Investigation of nanostructure of konjac-based water absorbents with atomic force microscopy[J]. Frontiers of Chemical Science and Engineering, 2009 , 3(4) : 357 -362 . DOI: 10.1007/s11705-009-0245-y

Options
Outlines

/

〈 〉