Nano-copper ions assembled cellulose-based composite with antibacterial activity for biodegradable personal protective mask

Abstract

The current SARS-CoV-2 pandemic has resulted in the widespread use of personal protective equipment, particularly face masks. However, the use of commercial disposable face masks puts great pressure on the environment. In this study, nano-copper ions assembled cotton fabric used in face masks to impart antibacterial activity has been discussed. To produce the nanocomposite, the cotton fabric was modified by sodium chloroacetate after its mercerization, and assembled with bactericidal nano-copper ions (about 10.61 mg·g^–1) through electrostatic adsorption. It demonstrated excellent antibacterial activity against Staphylococcus aureus and Escherichia coli because the gaps between fibers in the cotton fabric allow the nano-copper ions to be fully released. Moreover, the antibacterial efficiency was maintained even after 50 washing cycles. Furthermore, the face mask constructed with this novel nanocomposite upper layer exhibited a high particle filtration efficiency (96.08% ± 0.91%) without compromising the air permeability (28.9 min·L^–1). This green, economical, facile, and scalable process of depositing nano-copper ions onto modified cotton fibric has great potential to reduce disease transmission, resource consumption, and environmental impact of waste, while also expanding the range of protective fabrics.

Key words： cellulose-based; nanocomposite; biodegradable antibacterial fabric; nano-copper ions; face masks

Conflicts of interest

There are no conflicts to declare.

Acknowledgements

This work was financially supported by the Foundation of State Key Laboratory of Biobased Material and Green Papermaking (Grant No. GZKF202131), Qilu University of Technology, Shandong Academy of Sciences, and High-level Foreign Experts Project (Grant No. GDT20186100425).

References

1 Le Couteur D G, Anderson R M, Newman A B. COVID-19 through the lens of gerontology. Journals of Gerontology: Series A, 2020, 75(9): e119–e120

2 Promislow D E. A geroscience perspective on COVID-19 mortality. Journals of Gerontology: Series A, 2020, 75(9): e30–e33

3 Verity R, Okell L C, Dorigatti I, Winskill P, Whittaker C, Imai N, Cuomo-Dannenburg G, Thompson H, Walker P G T, Fu H, Dighe A, Griffin J T, Baguelin M, Bhatia S, Boonyasiri A, Cori A, Cucunubá Z, FitzJohn R, Gaythorpe K, Green W, Hamlet A, Hinsley W, Laydon D, Nedjati-Gilani G, Riley S, van Elsland S, Volz E, Wang H, Wang Y, Xi X, Donnelly C A, Ghani A C, Ferguson N M. Estimates of the severity of coronavirus disease 2019: a model-based analysis. The Lancet: Infectious Diseases, 2020, 20(6): 669–677

4 Kumar A, Sharma A, Chen Y, Jones M M, Vanyo S T, Li C, Visser M B, Mahajan S D, Sharma R K, Swihart M T. Copper@ ZIF-8 core−shell nanowires for reusable antimicrobial face masks. Advanced Functional Materials, 2021, 31(10): 2008054

5 Leung N H L, Chu D K W, Shiu E Y C, Chan K H, McDevitt J J, Hau B J P, Yen H L, Li Y, Ip D K M, Peiris J S M, Seto W H, Leung G M, Milton D K, Cowling B J. Respiratory virus shedding in exhaled breath and efficacy of face masks. Nature Medicine, 2020, 26(5): 676–680

6 Deng C, Seidi F, Yong Q, Jin X Y, Li C C, Zheng L, Yuan Z H, Xiao H N. Virucidal and biodegradable specialty cellulose nonwovens as personal protective equipment against COVID-19 pandemic. Journal of Advanced Research, 2022, 39: 147–156

7 Yang X, Ou C Y, Yang H Y, Liu L, Song T, Kang M, Lin H L, Hang J. Transmission of pathogen-laden expiratory droplets in a coach bus. Journal of Hazardous Materials, 2020, 397: 122609

8 Xiong S W, Fu P, Zou Q, Chen L, Jiang M, Zhang P, Wang Z, Cui L, Guo H, Gai J G. Heat conduction and antibacterial hexagonal boron nitride/polypropylene nanocomposite fibrous membranes for face masks with long-time wearing performance. ACS Applied Materials & Interfaces, 2020, 13(1): 196–206

9 Klemeš J J, Fan Y V, Tan R R, Jiang P. Minimising the present and future plastic waste, energy and environmental footprints related to COVID-19. Renewable & Sustainable Energy Reviews, 2020, 127: 109883

10 Choi S, Jeon H, Jang M, Kim H, Shin G, Koo J M, Lee M, Sung H K, Eom Y, Yang H S, Jegal J, Park J, Oh D X, Hwang S Y. Biodegradable, efficient, and breathable multi-use face mask filter. Advanced Science, 2021, 8(6): 2003155

11 Hiragond C B, Kshirsagar A S, Dhapte V V, Khanna T, Joshi P, More P V. Enhanced anti-microbial response of commercial face mask using colloidal silver nanoparticles. Vacuum, 2018, 156: 475–482

12 Meng X, Duan C, Zhang Y L, Lu W L, Wang W L, Ni Y H. Corncob-supported Ag NPs@ ZIF-8 nanohybrids as multifunction biosorbents for wastewater remediation: robust adsorption, catalysis and antibacterial activity. Composites Science and Technology, 2020, 200: 108384

13 Sun D Y, Turner J, Jiang N, Zhu S S, Zhang L, Falzon B G, McCoy C P, Maguire P, Mariotti D, Sun D. Atmospheric pressure microplasma for antibacterial silver nanoparticle/chitosan nanocomposites with tailored properties. Composites Science and Technology, 2020, 186: 107911

14 Wu Y P, Yang Y, Zhang Z J, Wang Z H, Zhao Y B, Sun L. A facile method to prepare size-tunable silver nanoparticles and its antibacterial mechanism. Advanced Powder Technology, 2018, 29(2): 407–415

15 Wan M H, Zhao H D, Wang Z H, Zou X Y, Zhao Y B, Sun L. Fabrication of Ag modified SiO₂ electrospun nanofibrous membranes as ultrasensitive and high stable SERS substrates for multiple analytes detection. Colloid and Interface Science Communications, 2021, 42: 100428

16 Ni Z H, Gu X X, He Y L, Wang Z H, Zou X Y, Zhao Y B, Sun L. Synthesis of silver nanoparticle-decorated hydroxyapatite (HA@Ag) poriferous nanocomposites and the study of their antibacterial activities. RSC Advances, 2018, 8(73): 41722–41730

17 Hashmi M, Ullah S, Kim I S. Copper oxide (CuO) loaded polyacrylonitrile (PAN) nanofiber membranes for antimicrobial breath mask applications. Current Research in Biotechnology, 2019, 1: 1–10

18 Jia B Q, Mei Y, Cheng L, Zhou J P, Zhang L N. Preparation of copper nanoparticles coated cellulose films with antibacterial properties through one-step reduction. ACS Applied Materials & Interfaces, 2012, 4(6): 2897–2902

19 Agarwal H, Menon S, Kumar S V, Rajeshkumar S. Mechanistic study on antibacterial action of zinc oxide nanoparticles synthesized using green route. Chemico-Biological Interactions, 2018, 286: 60–70

20 Qian X T, Gu Z H, Tang Q, Hong A M, Xu Z L, Dai Y H, Bian X Y, Lou H J, Mortimer M, Baalousha M, Li L. Chemical transformations of nanoscale zinc oxide in simulated sweat and its impact on the antibacterial efficacy. Journal of Hazardous Materials, 2021, 410: 124568

21 Kumar P, Roy S, Sarkar A, Jaiswal A. Reusable MoS₂-modified antibacterial fabrics with photothermal disinfection properties for repurposing of personal protective masks. ACS Applied Materials & Interfaces, 2021, 13(11): 12912–12927

22 Borkow G, Gabbay J. Copper, an ancient remedy returning to fight microbial, fungal and viral infections. Current Opinion in Chemical Biology, 2009, 3(3): 272–278

23 Karabulut S, Karabakan A, Denizli A, Yürüm Y. Batch removal of copper (II) and zinc (II) from aqueous solutions with low-rank Turkish coals. Separation and Purification Technology, 2000, 18(3): 177–184

24 Ramos M, Fiol S, López R, Antelo J, Arce F. Analysis of the effect of pH on Cu²⁺-fulvic acid complexation using a simple electrostatic model. Environmental Science & Technology, 2002, 36(14): 3109–3113

25 Bai H Y, Liang Z Z, Wang D W, Guo J Q, Zhang S W, Ma P M, Dong W F. Biopolymer nanocomposites with customized mechanical property and exceptionally antibacterial performance. Composites Science and Technology, 2020, 199: 108338

26 Deng C, Seidi F, Yong Q, Jin X Y, Li C C, Zhang X, Han J Q, Liu Y Q, Huang Y, Wang Y Y. Antiviral/antibacterial biodegradable cellulose nonwovens as environmentally friendly and bioprotective materials with potential to minimize microplastic pollution. Journal of Hazardous Materials, 2022, 424: 127391

27 Patil N A, Gore P M, Prakash N J, Govindaraj P, Yadav R, Verma V, Kandasubramanian B. Needleless electrospun phytochemicals encapsulated nanofibre based 3-ply biodegradable mask for combating COVID-19 pandemic. Chemical Engineering Journal, 2021, 416: 129152

28 Xu Q B, Xie L J, Diao H, Li F, Zhang Y Y, Fu F Y, Liu X D. Antibacterial cotton fabric with enhanced durability prepared using silver nanoparticles and carboxymethyl chitosan. Carbohydrate Polymers, 2017, 177: 187–193

29 Abbas W A, Shaheen B S, Ghanem L G, Badawy I M, Abodouh M M, Abdou S M, Allam N K. Cost-effective face mask filter based on hybrid composite nanofibrous layers with high filtration efficiency. Langmuir, 2021, 37(24): 7492–7502

30 Bai B, Mi X, Xiang X, Heiden P A, Heldt C L. Non-enveloped virus reduction with quaternized chitosan nanofibers containing graphene. Carbohydrate Research, 2013, 380: 137–142

31 Sathiyavimal S, Vasantharaj S, Kaliannan T, Pugazhendhi A. Eco-biocompatibility of chitosan coated biosynthesized copper oxide nanocomposite for enhanced industrial (azo) dye removal from aqueous solution and antibacterial properties. Carbohydrate Polymers, 2020, 241: 116243

32 Dumont M, Villet R, Guirand M, Montembault A, Delair T, Lack S, Barikosky M, Crepet A, Alcouffe P, Laurent F, David L. Processing and antibacterial properties of chitosan-coated alginate fibers. Carbohydrate Polymers, 2018, 190: 31–42

33 Varaprasad K, Raghavendra G M, Jayaramudu T, Seo J. Nano zinc oxide-sodium alginate antibacterial cellulose fibres. Carbohydrate Polymers, 2016, 135: 349–355

34 Shaban M, Mohamed F, Abdallah S. Production and characterization of superhydrophobic and antibacterial coated fabrics utilizing ZnO nanocatalyst. Scientific Reports, 2018, 8(1): 1–15

35 Wang J, Dang M, Duan C, Zhao W, Wang K. Carboxymethylated cellulose fibers as low-cost and renewable adsorbent materials. Industrial & Engineering Chemistry Research, 2017, 56(51): 14940–14948

36 Wang J, Liu M, Duan C, Sun J P, Xu Y W. Preparation and characterization of cellulose-based adsorbent and its application in heavy metal ions removal. Carbohydrate Polymers, 2019, 206: 837–843

37 Qin X Y, Duan C, Feng X M, Zhang Y L, Dai L, Xu Y J, Ni Y H. Integrating phosphotungstic acid-assisted prerefining with cellulase treatment for enhancing the reactivity of kraft-based dissolving pulp. Bioresource Technology, 2021, 320: 124283

38 Wang J, Liu Z, Shao X Y, Hu N, Liu M, Xu Y W. A novel preparation method and characterization of fluorescent cellulose fibers. Cellulose, 2020, 27(7): 3651–3659

39 Si R R, Chen Y H, Wang D Q, Yu D M, Ding Q J, Li R G, Wu C J. Nanoarchitectonics for high adsorption capacity carboxymethyl cellulose nanofibrils-based adsorbents for efficient Cu²⁺ removal. Nanomaterials, 2022, 12(1): 160

40 JuengchareonpoonaKWanichpongpanaPBoonamnuayvitayaV. Graphene oxide and carboxymethylcellulose film modified by citric acid for antibiotic removal. Journal of Environmental Chemical Engineering, 2021, 9, 1: 104637

41 Phan D N, Dorjjugder N, Khan M Q, Saito Y, Taguchi G, Lee H, Mukai Y, Kim I S. Synthesis and attachment of silver and copper nanoparticles on cellulose nanofibers and comparative antibacterial study. Cellulose, 2019, 26(11): 6629–6640

42 Liu Y, Xin J H, Choi C H. Cotton fabrics with single-faced superhydrophobicity. Langmuir, 2012, 28(50): 17426–17434

43 Imani S M, Ladouceur L, Marshall T, Maclachlan R, Soleymani L, Didar T F. Antimicrobial nanomaterials and coatings: current mechanisms and future perspectives to control the spread of viruses including SARS-CoV-2. ACS Nano, 2020, 14(10): 12341–12369