Preparation of a Pb loaded gas diffusion electrode and its application to CO₂ electroreduction

Abstract

A Pb loaded gas diffusion electrode was fabricated and used for the electroreduction of CO₂ to formic acid. The Pb/C catalyst was prepared by isometric impregnation. The crystal structure and morphology of the Pb/C catalyst were characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM). The preparation conditions of the gas diffusion electrode were optimized by adjusting the amounts of polytetrafluoroethylene (PTFE) in the gas diffusion layer and acetylene black in the catalytic layer. The electrochemical performance of the as-prepared gas diffusion electrode was studied by chronoamperometry and cyclic voltammetry. The optimized gas diffusion electrode showed good catalytic performance for the electroreduction of CO₂. The current efficiency of formic acid after 1 h of operation reached a maximum of 22% at -2.0 V versus saturated calomel electrode (SCE).

Key words： electroreduction; carbon dioxide; lead catalyst; gas diffusion electrode; formic acid

Acknowledgments

The work was supported by the National Natural Science Foundation of China (Grant No. 21076152), the Special Research Fund for the Doctoral Program of Higher Education of China (No. 2100032110018), the Program of Introducing Talents of Discipline to Universities, China (No. B06006) and the Engineering Education Fund of Tianjin University.

References

1 Mikkelsen M, Jorgensen M, Krebs F C. The teraton challenge. A review of fixation and transformation of carbon dioxide. Energy & Environmental Science, 2010, 3(1): 43–81

2 Wang W, Wang S P, Ma X B, Gong J L. Recent advances in catalytic hydrogenation of carbon dioxide. Chemical Society Reviews, 2011, 40(7): 3703–3727

3 Jitaru M. Electrochemical carbon dioxide reduction—fundamental and topics. Journal of the University of Chemical Technology and Metallurgy, 2007, 42(4): 333–344

4 Furuya N, Yamazaki T, Shibata M. High performance Ru-Pd catalysts for CO₂ reduction at gas-diffusion electrodes. Journal of Electroanalytical Chemistry, 1997, 431(1): 39–41

5 Li H, Oloman C. The electro-reduction of carbon doxide in a continuous reactor. Journal of Applied Electrochemistry, 2005, 35(10): 955–965

6 Azuma M, Hashimoto K, Hiramoto M, Watanabe M, Sakata T. Electrochemical reduction of carbon dioxide on various metal electrodes in low-temperature aqueous KHCO₃ media. Journal of the Electrochemical Society, 1990, 137(6): 1772–1778

7 Todoroki M, Hara K, Kudo A, Sakata T. Electrochemical reduction of high pressure CO₂ at Pb, Hg and In electrodes in an aqueous KHCO₃ solution. Journal of Electroanalytical Chemistry, 1995, 394(1–2): 199–203

8 Innocent B, Liaigre D, Pasquier D, Ropital F, Leger J M, Kokoh K B. Electro-reduction of carbon dioxide to formate on lead electrode in aqueous medium. Journal of Applied Electrochemistry, 2009, 39(2): 227–232

9 Koleli F, Atilan T, Palamut N, Gizir A M, Aydin R, Hamann C H. Electrochemical reduction of CO₂ at Pb- and Sn-electrodes in a fixed-bed reactor in aqueous K₂CO₃ and KHCO₃ media. Journal of Applied Electrochemistry, 2003, 33(5): 447–450

10 Koleli F, Balun D. Reduction of CO₂ under high pressure and high temperature on Pb-granule electrodes in a fixed-bed reactor in aqueous medium. Applied Catalysis A, General, 2004, 274(1–2): 237–242

11 Machunda R L, Ju H K, Lee J Y. Electrocatalytic reduction of CO₂ gas at Sn based gas diffusion electrode. Current Applied Physics, 2011, 11(4): 986–988

12 Machunda R L, Lee J G, Lee J Y. Microstructural surface changes of electrodeposited Pb on gas diffusion electrode during electroreduction of gas-phase CO₂. Surface and Interface Analysis, 2010, 42(6–7): 564–567

13 Subramanian K, Asokan K, Jeevarathinam D, Chandrasekaran M. Electrochemical membrane reactor for the reduction of carbondioxide to formate. Journal of Applied Electrochemistry, 2007, 37(2): 255–260

14 Lee J Y, Kwon Y K, Machunda R L, Lee H J. Electrocatalytic recycling of CO₂ and small organic molecules. Chemistry, an Asian Journal, 2009, 4(10): 1516–1523

15 Jitaru M, Lowy D A, Toma M, Toma B C, Oniciu L. Electrochemical reduction of carbon dioxide on flat metallic cathodes. Journal of Applied Electrochemistry, 1997, 27(8): 875–889

16 Oloman C, Li H. Electrochemical processing of carbon dioxide. ChemSusChem, 2008, 1(5): 385–391

17 Hori Y, Konishi H, Futamura T, Murata A, Koga O, Sakurai H, Oguma K. Deactivation of copper electrode in electrochemical reduction of CO₂. Electrochimica Acta, 2005, 50(27): 5354–5369

18 Sudoh M, Arai K, Izawa Y, Suzuki T, Uno M, Tanaka M, Hirao K, Nishiki Y. Evaluation of Ag-based gas-diffusion electrode for two-compartment cell used in novel chlor-alkali membrane process. Electrochimica Acta, 2011, 56(28): 10575–10581

19 Sanchez-Sanchez C M, Montiel V, Tryk D A, Aldaz A, Fujishima A. Electrochemical approaches to alleviation of the problem of carbon dioxide accumulation. Pure and Applied Chemistry, 2001, 73(12): 1917–1927

20 Lee K R, Lim J H, Lee J K, Chun H S. Reduction of carbon dioxide in 3-dimensional gas diffusion electrode. Korean Journal of Chemical Engineering, 1999, 16(6): 829–836

21 Chaplin R P S, Wragg A A. Effects of process conditions and electrode material on reaction pathways for carbon dioxide electroreduction with particular reference to formate formation. Journal of Applied Electrochemistry, 2003, 33(12): 1107–1123

22 Wang Y, Nguyen T S, Liu X W, Wang X. Novel palladium-lead (Pd-Pb/C) bimetallic catalysts for electrooxidation of ethanol in alkaline media. Journal of Power Sources, 2010, 195(9): 2619–2622

23 Kwon Y K, Lee J Y. Formic acid from carbon dioxide on nanolayered electrocatalyst. Electrocatalysis, 2010, 1(2–3): 108–115

24 Kenjo T, Kawatsu K. Current–limiting factors and the location of the reaction area in PTFE-bonded double-layered oxygen electrodes. Electrochimica Acta, 1985, 30(2): 229–233

25 Bidault F, Brett D J L, Middleton P H, Brandon N P. Review of gas diffusion cathodes for alkaline fuel cells. Journal of Power Sources, 2009, 187(1): 39–48

26 Chen-Yang Y W, Hung T F, Huang J, Yang F L. Novel single-layer gas diffusion layer based on PTFE/carbon black composite for proton exchange membrane fuel cell. Journal of Power Sources, 2007, 173(1): 183–188

27 Gharibi H, Javaheri M, Mirzaie R A. The synergy between multi-wall carbon nanotubes andVulcan XC72R in microporous layers. International Journal of Hydrogen Energy, 2010, 35(17): 9241–9251

28 Kim J H, Yonezawa S, Takashima M. Preparation and characterization of Ni-PTFE plate as an electrode for alkaline fuel cell: effects of conducting materials on the performance of electrode. International Journal of Hydrogen Energy, 2010, 35(16): 8707–8714

29 Kobayashi T, Takahashi H. Novel CO₂ Electrochemical Reduction to Methanol for H₂ Storage. Energy & Fuels, 2004, 18(1): 285–286

30 Kaneco S, Iwao R, Iiba K, Ohta K, Mizuno T. Electrochemical conversion of carbon dioxide to formic acid on Pb in KOH/methanol electrolyte at ambient temperature and pressure. Energy, 1998, 23(12): 1107–1112

31 Chu D B, Qin G X, Yuan X M, Xu M, Zheng P, Lu J. Fixation of CO₂ by electrocatalytic reduction and electropolymerization in ionic liquid-H₂O solution. ChemSusChem, 2008, 1(3): 205–209