Chemical recycling of polyolefin waste: from the perspective of efficient pyrolysis reactors

Abstract

Polyolefins, widely used for packaging, construction, and electronics, facilitate daily life but cause severe environmental pollution when discarded after usage. Chemical recycling of polyolefins has received widespread attention for eliminating polyolefin pollution, as it is promising to convert polyolefin wastes to high-value chemicals (e.g., fuels, light olefins, aromatic hydrocarbons). However, the chemical recycling of polyolefins typically involves high-viscosity, high-temperature and high-pressure, and its efficiency depends on the catalytic materials, reaction conditions, and more essentially, on the reactors which are overlooked in previous studies. Herein, this review first introduces the mechanisms and influencing factors of polyolefin waste upcycling, followed by a brief overview of in situ and ex situ processes. Emphatically, the review focuses on the various reactors used in polyolefin recycling (i.e., batch/semi-batch reactor, fixed bed reactor, fluidized bed reactor, conical spouted bed reactor, screw reactor, molten metal bed reactor, vertical falling film reactor, rotary kiln reactor and microwave-assisted reactor) and their respective merits and demerits. Nevertheless, challenges remain in developing highly efficient reacting techniques to realize the practical application. In light of this, the review is concluded with recommendations and prospects to enlighten the future of polyolefin upcycling.

Keywords

polyolefins / chemical recycling / thermal pyrolysis / catalytic pyrolysis / reactors

参考文献

[1] Sardon H , Dove A P . Plastics recycling with a difference. Science, 2018, 360(6387): 380–381

[2] Abbas-Abadi M S , Ureel Y , Eschenbacher A , Vermeire F H , Varghese R J , Oenema J , Stefanidis G D , Van Geem K M . Challenges and opportunities of light olefin production via thermal and catalytic pyrolysis of end-of-life polyolefins: towards full recyclability. Progress in Energy and Combustion Science, 2023, 96: 101046

[3] Gibb B C . Plastics are forever. Nature Chemistry, 2019, 11(5): 394–395

[4] RitchieHSamborskaVRoserM. Plastic pollution. Our World in Data, 2023

[5] Di J , Reck B K , Miatto A , Graedel T E . United States plastics: large flows, short lifetimes, and negligible recycling. Resources, Conservation and Recycling, 2021, 167: 105440

[6] KarmakarG P. Regeneration and recovery of plastics. Encyclopedia of Materials: Plastics and Polymers, 2022: 634–651

[7] Huang Z , Weng Y , Shen Q , Zhao Y , Jin Y . Microplastic: a potential threat to human and animal health by interfering with the intestinal barrier function and changing the intestinal microenvironment. Science of the Total Environment, 2021, 785: 147365

[8] Rahman A , Sarkar A , Yadav O P , Achari G , Slobodnik J . Potential human health risks due to environmental exposure to nano- and microplastics and knowledge gaps: a scoping review. Science of the Total Environment, 2021, 757: 143872

[9] Issifu I , Deffor E W , Sumaila U R . How COVID-19 could change the economics of the plastic recycling sector. Recycling, 2021, 6(4): 64

[10] Vollmer I , Jenks M J F , Roelands M C P , White R J , Van Harmelen T , De Wild P , Van Der Laan G P , Meirer F , Keurentjes J T F , Weckhuysen B M . Beyond mechanical recycling: giving new life to plastic waste. Angewandte Chemie International Edition, 2020, 59(36): 15402–15423

[11] Nkwachukwu O , Chima C , Ikenna A , Albert L . Focus on potential environmental issues on plastic world towards a sustainable plastic recycling in developing countries. International Journal of Industrial Chemistry, 2013, 4(1): 34

[12] Sheldon R A , Norton M . Green chemistry and the plastic pollution challenge: towards a circular economy. Green Chemistry, 2020, 22(19): 6310–6322

[13] Kiersnowska A , Fabianowski W , Koda E . The influence of the accelerated aging conditions on the properties of polyolefin geogrids used for landfill slope reinforcement. Polymers, 2020, 12(9): 1874

[14] De Weerdt L , Sasao T , Compernolle T , Van Passel S , De Jaeger S . The effect of waste incineration taxation on industrial plastic waste generation: a panel analysis. Resources, Conservation and Recycling, 2020, 157: 104717

[15] Schyns Z O G , Shaver M P . Mechanical recycling of packaging plastics: a review. Macromolecular Rapid Communications, 2021, 42(3): 2000415

[16] Idumah C I , Nwuzor I C . Novel trends in plastic waste management. SN Applied Sciences, 2019, 1(11): 1402

[17] Nanda S , Berruti F . Thermochemical conversion of plastic waste to fuels: a review. Environmental Chemistry Letters, 2021, 19(1): 123–148

[18] Ibikunle R A , Titiladunayo I F , Akinnuli B O , Dahunsi S O , Olayanju T M A . Estimation of power generation from municipal solid wastes: a case study of Ilorin metropolis, Nigeria. Energy Reports, 2019, 5: 126–135

[19] Jouhara H , Ahmad D , van den Boogaert I , Katsou E , Simons S , Spencer N . Pyrolysis of domestic based feedstock at temperatures up to 300 °C. Thermal Science and Engineering Progress, 2018, 5: 117–143

[20] Verma R , Vinoda K S , Papireddy M , Gowda A N S . Toxic pollutants from plastic waste—a review. Procedia Environmental Sciences, 2016, 35: 701–708

[21] Ragaert K , Delva L , Van Geem K . Mechanical and chemical recycling of solid plastic waste. Waste Management, 2017, 69: 24–58

[22] Williams C K , Gregory G L . High-performance plastic made from renewable oils is chemically recyclable by design. Nature, 2021, 590(7846): 391–392

[23] EschenbacherAVargheseR JAbbas-AbadiM SVanGeem K M.. Maximizing light olefins and aromatics as high value base chemicals via single step catalytic conversion of plastic waste. Chemical Engineering Journal, 2022, 428: 132087

[24] Kwon D . Three ways to solve the plastics pollution crisis. Nature, 2023, 616(7956): 234–237

[25] Wang C , Lei H , Qian M , Huo E , Zhao Y , Zhang Q , Mateo W , Lin X , Kong X , Zou R . . Application of highly stable biochar catalysts for efficient pyrolysis of plastics: a readily accessible potential solution to a global waste crisis. Sustainable Energy & Fuels, 2020, 4(9): 4614–4624

[26] Abbas-Abadi M S , Haghighi M N , Yeganeh H , McDonald A G . Evaluation of pyrolysis process parameters on polypropylene degradation products. Journal of Analytical and Applied Pyrolysis, 2014, 109: 272–277

[27] Santos B P S , Almeida D , Marques M de F V , Henriques C A . Petrochemical feedstock from pyrolysis of waste polyethylene and polypropylene using different catalysts. Fuel, 2018, 215: 515–521

[28] Lopez G , Artetxe M , Amutio M , Alvarez J , Bilbao J , Olazar M . Recent advances in the gasification of waste plastics. A critical overview. Renewable & Sustainable Energy Reviews, 2018, 82: 576–596

[29] Gil J , Corella J , Aznar M P , Caballero M A . Biomass gasification in atmospheric and bubbling fluidized bed: effect of the type of gasifying agent on the product distribution. Biomass and Bioenergy, 1999, 17(5): 389–403

[30] Erkiaga A , Lopez G , Amutio M , Bilbao J , Olazar M . Syngas from steam gasification of polyethylene in a conical spouted bed reactor. Fuel, 2013, 109: 461–469

[31] Liu X , Zhang Y , Nahil M A , Williams P T , Wu C . Development of Ni- and Fe-based catalysts with different metal particle sizes for the production of carbon nanotubes and hydrogen from thermo-chemical conversion of waste plastics. Journal of Analytical and Applied Pyrolysis, 2017, 125: 32–39

[32] Yao D , Wu C , Yang H , Zhang Y , Nahil M A , Chen Y , Williams P T , Chen H . Co-production of hydrogen and carbon nanotubes from catalytic pyrolysis of waste plastics on Ni-Fe bimetallic catalyst. Energy Conversion and Management, 2017, 148: 692–700

[33] Hassanian-Moghaddam D , Asghari N , Ahmadi M . Circular polyolefins: advances toward a sustainable future. Macromolecules, 2023, 56(15): 5679–5697

[34] Jiang J , Shi K , Zhang X , Yu K , Zhang H , He J , Ju Y , Liu J . From plastic waste to wealth using chemical recycling: a review. Journal of Environmental Chemical Engineering, 2022, 10(1): 106867

[35] Hussein Z A , Shakor Z M , Alzuhairi M , Al-Sheikh F . Thermal and catalytic cracking of plastic waste: a review. International Journal of Environmental Analytical Chemistry, 2023, 103(17): 5920–5937

[36] Sekar M , Ponnusamy V K , Pugazhendhi A , Nižetić S , Praveenkumar T R . Production and utilization of pyrolysis oil from solidplastic wastes: a review on pyrolysis process and influence of reactors design. Journal of Environmental Management, 2022, 302: 114046

[37] ChangYZhouQWangQWangWLiBLiuP. Research progress in high value chemical recycling of waste polyolefins. Chemical Industry and Engineering Progress, 2023, 42(8): 3965–3978 (in Chinese)

[38] Park K B , Jeong Y S , Kim J S . Activator-assisted pyrolysis of polypropylene. Applied Energy, 2019, 253: 113558

[39] Park K B , Jeong Y S , Guzelciftci B , Kim J S . Characteristics of a new type continuous two-stage pyrolysis of waste polyethylene. Energy, 2019, 166: 343–351

[40] Kaminsky W . Chemical recycling of plastics by fluidized bed pyrolysis. Fuel Communications, 2021, 8: 100023

[41] Cui Y , Zhang Y , Cui L , Xiong Q , Mostafa E . Microwave-assisted fluidized bed reactor pyrolysis of polypropylene plastic for pyrolysis gas production towards a sustainable development. Applied Energy, 2023, 342: 121099

[42] Hu W , Sárossy Z , Jensen A D , Daugaard A E , Jensen P A . Two-stage fixed-bed low-density polyethylene pyrolysis: influence of using different catalytic materials in the second stage. Energy & Fuels, 2023, 37(23): 19063–19075

[43] Hussain I , Ganiyu S A , Alasiri H , Alhooshani K . A state-of-the-art review on waste plastics-derived aviation fuel: unveiling the heterogeneous catalytic systems and techno-economy feasibility of catalytic pyrolysis. Energy Conversion and Management, 2022, 274: 116433

[44] Harmon R E , SriBala G , Broadbelt L J , Burnham A K . SriBala G, Broadbelt L J, Burnham A K. Insight into polyethylene and polypropylene pyrolysis: global and mechanistic models. Energy & Fuels, 2021, 35(8): 6765–6775

[45] Qureshi M S , Oasmaa A , Pihkola H , Deviatkin I , Tenhunen A , Mannila J , Minkkinen H , Pohjakallio M , Laine-Ylijoki J . Pyrolysis of plastic waste: opportunities and challenges. Journal of Analytical and Applied Pyrolysis, 2020, 152: 104804

[46] Zhang Y , Fu Z , Wang W , Ji G , Zhao M , Li A . Kinetics, product evolution, and mechanism for the pyrolysis of typical plastic waste. ACS Sustainable Chemistry & Engineering, 2022, 10(1): 91–103

[47] Willems P A , Froment G F . Kinetic modeling of the thermal cracking of hydrocarbons. 1. Calculation of frequency factors. Industrial & Engineering Chemistry Research, 1988, 27(11): 1959–1966

[48] Artetxe M , Lopez G , Elordi G , Amutio M , Bilbao J , Olazar M . Production of light olefins from polyethylene in a two-step process: pyrolysis in a conical spouted bed and downstream high-temperature thermal cracking. Industrial & Engineering Chemistry Research, 2012, 51(43): 13915–13923

[49] Arabiourrutia M , Elordi G , Lopez G , Borsella E , Bilbao J , Olazar M . Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor. Journal of Analytical and Applied Pyrolysis, 2012, 94: 230–237

[50] Saeaung K , Phusunti N , Phetwarotai W , Assabumrungrat S , Cheirsilp B . Catalytic pyrolysis of petroleum-based and biodegradable plastic waste to obtain high-value chemicals. Waste Management, 2021, 127: 101–111

[51] Al-Salem S M . Thermal pyrolysis of high density polyethylene (HDPE) in a novel fixed bed reactor system for the production of high value gasoline range hydrocarbons (HC). Process Safety and Environmental Protection, 2019, 127: 171–179

[52] Parku G K , Collard F X , Görgens J F . Pyrolysis of waste polypropylene plastics for energy recovery: influence of heating rate and vacuum conditions on composition of fuel product. Fuel Processing Technology, 2020, 209: 106522

[53] Zhao D , Wang X , Miller J B , Huber G W . The chemistry and kinetics of polyethylene pyrolysis: a process to produce fuels and chemicals. ChemSusChem, 2020, 13(7): 1764–1774

[54] Predel M , Kaminsky W . Pyrolysis of mixed polyolefins in a fluidised-bed reactor and on a pyro-GC/MS to yield aliphatic waxes. Polymer Degradation & Stability, 2000, 70(3): 373–385

[55] Williams P T , Williams E A . Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock. Journal of Analytical and Applied Pyrolysis, 1999, 51(1): 107–126

[56] Grause G , Matsumoto S , Kameda T , Yoshioka T . Pyrolysis of mixed plastics in a fluidized bed of hard burnt lime. Industrial & Engineering Chemistry Research, 2011, 50(9): 5459–5466

[57] Mastral F J , Esperanza E , García P , Juste M . Pyrolysis of high-density polyethylene in a fluidised bed reactor. Influence of the temperature and residence time. Journal of Analytical and Applied Pyrolysis, 2002, 63(1): 1–15

[58] Al-Salem S M , Yang Y , Wang J , Leeke G A . Pyro-oil and wax recovery from reclaimed plastic waste in a continuous auger/pyrolysis reactor. Energies, 2020, 13(8): 2040

[59] Ahmad I , Khan M I , Khan H , Ishaq M , Tariq R , Gul K , Ahmad W . Pyrolysis study of polypropylene and polyethylene into premium oil products. International Journal of Green Energy, 2015, 12(7): 663–671

[60] Undri A , Rosi L , Frediani M , Frediani P . Efficient disposal of waste polyolefins through microwave assisted pyrolysis. Fuel, 2014, 116: 662–671

[61] WangYZhangYFanHWuPLiuMLiXYangJLiuCBaiPYanZ. Elucidating the structure-performance relationship of typical commercial zeolites in catalytic cracking of low-density polyethylene. Catalysis Today, 2022, 405–406: 135–143

[62] Dai L , Zhou N , Lv Y , Cheng Y , Wang Y , Liu Y , Cobb K , Chen P , Lei H , Ruan R . Chemical upcycling of waste polyolefinic plastics to low-carbon synthetic naphtha for closing the plastic use loop. Science of the Total Environment, 2021, 782: 146897

[63] Eschenbacher A , Goodarzi F , Varghese R J , Enemark-Rasmussen K , Kegnæs S , Abbas-Abadi M S , Van Geem K M . Boron-modified mesoporous ZSM-5 for the conversion of pyrolysis vapors from LDPE and mixed polyolefins: maximizing the C₂–C₄ olefin yield with minimal carbon footprint. ACS Sustainable Chemistry & Engineering, 2021, 9(43): 14618–14630

[64] Aguado J , Serrano D P , San Miguel G , Castro M C , Madrid S . Feedstock recycling of polyethylene in a two-step thermo-catalytic reaction system. Journal of Analytical and Applied Pyrolysis, 2007, 79(1–2): 415–423

[65] Lin Y H , Yen H Y . Fluidised bed pyrolysis of polypropylene over cracking catalysts for producing hydrocarbons. Polymer Degradation & Stability, 2005, 89(1): 101–108

[66] ArtetxeMLopezGAmutioMElordiGBilbaoJOlazarM. Light olefins from HDPE cracking in a two-step thermal and catalytic process. Chemical Engineering Journal, 2012, 207–208: 27–34

[67] Chen Z , Monzavi M , Latifi M , Samih S , Chaouki J . Microwave-responsive SiC foam@zeolite core-shell structured catalyst for catalytic pyrolysis of plastics. Environmental Pollution, 2022, 307: 119573

[68] Dai L , Zhou N , Lv Y , Cobb K , Cheng Y , Wang Y , Liu Y , Chen P , Zou R , Lei H . . Pyrolysis-catalysis for waste polyolefin conversion into low aromatic naphtha. Energy Conversion and Management, 2021, 245: 114578

[69] Zhou N , Dai L , Lv Y , Li H , Deng W , Guo F , Chen P , Lei H , Ruan R . Catalytic pyrolysis of plastic wastes in a continuous microwave assisted pyrolysis system for fuel production. Chemical Engineering Journal, 2021, 418: 129412

[70] Peng Y , Wang Y , Ke L , Dai L , Wu Q , Cobb K , Zeng Y , Zou R , Liu Y , Ruan R . A review on catalytic pyrolysis of plastic wastes to high-value products. Energy Conversion and Management, 2022, 254: 115243

[71] Zhang Z , Gora-Marek K , Watson J S , Tian J , Ryder M R , Tarach K A , López-Pérez L , Martínez-Triguero J , Melián-Cabrera I . Recovering waste plastics using shape-selective nano-scale reactors as catalysts. Nature Sustainability, 2019, 2(1): 39–42

[72] Seifali Abbas-Abadi M , Fathi M , Ghadiri M . Effect of different process parameters on the pyrolysis of Iranian oak using a fixed bed reactor and TGA instrument. Energy & Fuels, 2019, 33(11): 11226–11234

[73] Miandad R , Barakat M A , Aburiazaiza A S , Rehan M , Nizami A S . Catalytic pyrolysis of plastic waste: a review. Process Safety and Environmental Protection, 2016, 102: 822–838

[74] Duan J , Chen W , Wang C , Wang L , Liu Z , Yi X , Fang W , Wang H , Wei H , Xu S . . Coking-resistant polyethylene upcycling modulated by zeolite micropore diffusion. Journal of the American Chemical Society, 2022, 144(31): 14269–14277

[75] Raveh-Amit H , Lemont F , Bar-Nes G , Klein-BenDavid O , Banano N , Gelfer S , Charvin P , Bin Rozaini T , Sedan J , Rousset F . Catalytic pyrolysis of high-density polyethylene: decomposition efficiency and kinetics. Catalysts, 2022, 12(2): 140

[76] Socci J , Osatiashtiani A , Kyriakou G , Bridgwater T . The catalytic cracking of sterically challenging plastic feedstocks over high acid density Al-SBA-15 catalysts. Applied Catalysis A, General, 2019, 570: 218–227

[77] Castaño P , Elordi G , Olazar M , Aguayo A T , Pawelec B , Bilbao J . Insights into the coke deposited on HZSM-5, Hβ and HY zeolites during the cracking of polyethylene. Applied Catalysis B: Environmental, 2011, 104(1): 91–100

[78] Akin O , Varghese R J , Eschenbacher A , Oenema J , Abbas-Abadi M S , Stefanidis G D , Van Geem K M . Chemical recycling of plastic waste to monomers: effect of catalyst contact time, acidity and pore size on olefin recovery in ex-situ catalytic pyrolysis of polyolefin waste. Journal of Analytical and Applied Pyrolysis, 2023, 172: 106036

[79] Gancedo J , Li H , Walz J S , Faba L , Ordoñez S , Huber G W . Investigation into the shape selectivity of zeolites for conversion of polyolefin plastic pyrolysis oil model compound. Applied Catalysis A, General, 2024, 669: 119484

[80] Yuan H , Li C , Shan R , Zhang J , Wu Y , Chen Y . Recent developments on the zeolites catalyzed polyolefin plastics pyrolysis. Fuel Processing Technology, 2022, 238: 107531

[81] Dai L , Zhou N , Cobb K , Chen P , Wang Y , Liu Y , Zou R , Lei H , Mohamed B A , Cheng Y . . Insights into structure–performance relationship in the catalytic cracking of high density polyethylene. Applied Catalysis B: Environmental, 2022, 318: 121835

[82] Olazar M , Lopez G , Amutio M , Elordi G , Aguado R , Bilbao J . Influence of FCC catalyst steaming on HDPE pyrolysis product distribution. Journal of Analytical and Applied Pyrolysis, 2009, 85(1–2): 359–365

[83] Zhang X , Yang H , Chen Z , Wang X , Feng H , Zhang J , Yu J , Gao S , Lai D . Sustainable production of aromatics via catalytic pyrolysis of polyolefins towards the carbon cycle for plastics. Fuel, 2024, 357: 129897

[84] Su X , Zan W , Bai X , Wang G , Wu W . Synthesis of microscale and nanoscale ZSM-5 zeolites: effect of particle size and acidity of Zn modified ZSM-5 zeolites on aromatization performance. Catalysis Science & Technology, 2017, 7(9): 1943–1952

[85] Lee W T , van Muyden A , Bobbink F D , Mensi M D , Carullo J R , Dyson P J . Mechanistic classification and benchmarking of polyolefin depolymerization over silica-alumina-based catalysts. Nature Communications, 2022, 13(1): 4850

[86] Zhou Q , Wang D , Wang Q , He K , Lim K H , Yang X , Wang W , Li B , Liu P . Mechanistic understanding of efficient polyethylene hydrocracking over two-dimensional platinum-anchored tungsten trioxide. Angewandte Chemie International Edition, 2023, 62(40): e202305644

[87] Wang Q , Li Y , Serrano-Lotina A , Han W , Portela R , Wang R , Bañares M A , Yeung K L . Operando investigation of toluene oxidation over 1D Pt@CeO₂ derived from Pt cluster-containing MOF. Journal of the American Chemical Society, 2021, 143(1): 196–205

[88] Zhang F , Zeng M , Yappert R D , Sun J , Lee Y H , LaPointe A M , Peters B , Abu-Omar M M , Scott S L . Polyethylene upcycling to long-chain alkylaromatics by tandem hydrogenolysis/aromatization. Science, 2020, 370(6515): 437–441

[89] Pennel M L , Maurya A K , Ebrahim A M , Tassone C J , Cargnello M . Activity of silica-alumina for the conversion of polyethylene into tunable aromatics below pyrolytic temperatures. ACS Sustainable Chemistry & Engineering, 2023, 11(34): 12623–12630

[90] Yuan Y , Xie Z , Turaczy K K , Hwang S , Zhou J , Chen J G . Controlling product distribution of polyethylene hydrogenolysis using bimetallic RuM₃ (M = Fe, Co, Ni) catalysts. Chem & Bio Engineering, 2024, 1(1): 67–75

[91] Inayat A , Fasolini A , Basile F , Fridrichova D , Lestinsky P . Chemical recycling of waste polystyrene by thermo-catalytic pyrolysis: a description for different feedstocks, catalysts and operation modes. Polymer Degradation & Stability, 2022, 201: 109981

[92] Inayat A , Inayat A , Schwieger W , Sokolova B , Lestinsky P . Enhancing aromatics and olefins yields in thermo-catalytic pyrolysis of LDPE over zeolites: role of staged catalysis and acid site density of HZSM-5. Fuel, 2022, 314: 123071

[93] Muneer B , Zeeshan M , Qaisar S , Razzaq M , Iftikhar H . Influence of in-situ and ex-situ HZSM-5 catalyst on co-pyrolysis of corn stalk and polystyrene with a focus on liquid yield and quality. Journal of Cleaner Production, 2019, 237: 117762

[94] Xue Y , Johnston P , Bai X . Effect of catalyst contact mode and gas atmosphere during catalytic pyrolysis of waste plastics. Energy Conversion and Management, 2017, 142: 441–451

[95] Duan D , Wang Y , Dai L , Ruan R , Zhao Y , Fan L , Tayier M , Liu Y . Ex-situ catalytic co-pyrolysis of lignin and polypropylene to upgrade bio-oil quality by microwave heating. Bioresource Technology, 2017, 241: 207–213

[96] Zheng Y , Li D , Pei T , Wang J , Liu C , Lu Y , Lin X , Li J , Zheng Z . Mechanism of synergistic effects and kinetic analysis in bamboo-LDPE waste ex-situ catalytic co-pyrolysis for enhanced aromatic hydrocarbon production via CeZrAl and HZSM-5 dual catalyst. Journal of Environmental Chemical Engineering, 2022, 10(3): 107479

[97] Ellis L D , Rorrer N A , Sullivan K P , Otto M , McGeehan J E , Román-Leshkov Y , Wierckx N , Beckham G T . Chemical and biological catalysis for plastics recycling and upcycling. Nature Catalysis, 2021, 4(7): 539–556

[98] Onwudili J A , Insura N , Williams P T . Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: effects of temperature and residence time. Journal of Analytical and Applied Pyrolysis, 2009, 86(2): 293–303

[99] Singh R K , Ruj B , Sadhukhan A K , Gupta P . Impact of fast and slow pyrolysis on the degradation of mixed plastic waste: product yield analysis and their characterization. Journal of the Energy Institute, 2019, 92(6): 1647–1657

[100] Das P , Tiwari P . The effect of slow pyrolysis on the conversion of packaging waste plastics (PE and PP) into fuel. Waste Management, 2018, 79: 615–624

[101] Supriyanto Y P , Richards T . Gaseous products from primary reactions of fast plastic pyrolysis. Journal of Analytical and Applied Pyrolysis, 2021, 158: 105248

[102] Maqsood T , Dai J , Zhang Y , Guang M , Li B . Pyrolysis of plastic species: a review of resources and products. Journal of Analytical and Applied Pyrolysis, 2021, 159: 105295

[103] Santos E , Rijo B , Lemos F , Lemos M A N D A . A catalytic reactive distillation approach to high density polyethylene pyrolysis—Part 2—Middle olefin production. Catalysis Today, 2021, 379: 212–221

[104] Jahirul M I , Rasul M G , Schaller D , Khan M M K , Hasan M M , Hazrat M A . Transport fuel from waste plastics pyrolysis—a review on technologies, challenges and opportunities. Energy Conversion and Management, 2022, 258: 115451

[105] Butler E , Devlin G , McDonnell K . Waste polyolefins to liquid fuels via pyrolysis: review of commercial state-of-the-art and recent laboratory research. Waste and Biomass Valorization, 2011, 2(3): 227–255

[106] Yang Y , Pan R , Shuai Y . Investigation of the effect of alumina porous media on the polyethylene waste pyrolysis with continuous feed. Fuel, 2024, 361: 130734

[107] Giglio E , Marino A , Pizarro P , Escola J M , Migliori M , Giordano G , Serrano D P . Critical issues for the deployment of plastic waste pyrolysis. Catalysis Science & Technology, 2023, 13(20): 5799–5820

[108] Papuga S , Gvero P , Vukic L . Temperature and time influence on the waste plastics pyrolysis in the fixed bed reactor. Thermal Science, 2016, 20(2): 731–741

[109] Ballice L . A kinetic approach to the temperature-programmed pyrolysis of low- and high-density polyethylene in a fixed bed reactor: determination of kinetic parameters for the evolution of n-paraffins and 1-olefins. Fuel, 2001, 80(13): 1923–1935

[110] Antonakou E V , Kalogiannis K G , Stefanidis S D , Karakoulia S A , Triantafyllidis K S , Lappas A A , Achilias D S . Catalytic and thermal pyrolysis of polycarbonate in a fixed-bed reactor: the effect of catalysts on products yields and composition. Polymer Degradation & Stability, 2014, 110: 482–491

[111] Abbas-Abadi M S , Van Geem K M , Fathi M , Bazgir H , Ghadiri M . The pyrolysis of oak with polyethylene, polypropylene and polystyrene using fixed bed and stirred reactors and TGA instrument. Energy, 2021, 232: 121085

[112] Valanciene E , Miknius L , Martynaitis V , Striugas N . Influence of equilibrium fluid catalytic cracking catalyst amount on the thermolysis process of various polyolefin plastic wastes in a fixed-bed reactor for gasoline and diesel production. Energy & Fuels, 2017, 31(10): 11194–11210

[113] Albor G , Mirkouei A , McDonald A G , Struhs E , Sotoudehnia F . Fixed bed batch slow pyrolysis process for polystyrene waste recycling. Processes, 2023, 11(4): 1126

[114] Kasar P , Sharma D K , Ahmaruzzaman M . Thermal and catalytic decomposition of waste plastics and its co-processing with petroleum residue through pyrolysis process. Journal of Cleaner Production, 2020, 265: 121639

[115] Mastellone M L , Arena U . Fluidized-bed pyrolysis of polyolefins wastes: predictive defluidization model. AIChE Journal. American Institute of Chemical Engineers, 2002, 48(7): 1439–1447

[116] Jung S H , Cho M H , Kang B S , Kim J S . Pyrolysis of a fraction of waste polypropylene and polyethylene for the recovery of BTX aromatics using a fluidized bed reactor. Fuel Processing Technology, 2010, 91(3): 277–284

[117] Salaudeen S A , Al-Salem S M , Sharma S , Dutta A . Pyrolysis of high-density polyethylene in a fluidized bed reactor: pyro-wax and gas analysis. Industrial & Engineering Chemistry Research, 2021, 60(50): 18283–18292

[118] Hafeez S , Van Haute M , Constantinou A , Al-Salem S M . Process simulation modeling of the linear low-density polyethylene catalytic pyrolysis in a fluidized bed reactor. Industrial & Engineering Chemistry Research, 2023, 62(16): 6386–6393

[119] Al-Salem S M , Van Haute M , Karam H J , Hakeem A , Meuldermans W , Patel J , Hafeez S , Manos G , Constantinou A . Fuel range properties of oil and wax obtained from catalytic pyrolysis of linear low-density polyethylene in a fluidized bed reactor (FBR). Industrial & Engineering Chemistry Research, 2022, 61(43): 16383–16392

[120] Wei T T , Lin Y H . Fast pyroylysis of polyolefin waste over cracking catalysts for producing hydrocarbon fuels using a fluidized-bed reactor. International Journal of Chemical Reactor Engineering, 2012, 10(1): A69

[121] HafeezSPallariEManosGConstantinouA. 6—Catalytic conversion and chemical recovery. Plastics to Energy, 2019, 147–172

[122] Aguado R , Olazar M , Gaisán B , Prieto R , Bilbao J . Kinetic study of polyolefin pyrolysis in a conical spouted bed reactor. Industrial & Engineering Chemistry Research, 2002, 41(18): 4559–4566

[123] Aguado R , Olazar M , San José M J , Gaisán B , Bilbao J . Wax formation in the pyrolysis of polyolefins in a conical spouted bed reactor. Energy & Fuels, 2002, 16(6): 1429–1437

[124] Elordi G , Olazar M , Lopez G , Artetxe M , Bilbao J . Continuous polyolefin cracking on an HZSM-5 zeolite catalyst in a conical spouted bed reactor. Industrial & Engineering Chemistry Research, 2011, 50(10): 6061–6070

[125] Elordi G , Olazar M , Lopez G , Artetxe M , Bilbao J . Product yields and compositions in the continuous pyrolysis of high-density polyethylene in a conical spouted bed reactor. Industrial & Engineering Chemistry Research, 2011, 50(11): 6650–6659

[126] Orozco S , Alvarez J , Lopez G , Artetxe M , Bilbao J , Olazar M . Pyrolysis of plastic wastes in a fountain confined conical spouted bed reactor: determination of stable operating conditions. Energy Conversion and Management, 2021, 229: 113768

[127] Orozco S , Artetxe M , Lopez G , Suarez M , Bilbao J , Olazar M . Conversion of HDPE into value products by fast pyrolysis using FCC spent catalysts in a fountain confined conical spouted bed reactor. ChemSusChem, 2021, 14(19): 4291–4300

[128] SerranoD PAguadoJEscolaJ MGaragorriE. Conversion of low density polyethylene into petrochemical feedstocks using a continuous screw kiln reactor. Journal of Analytical and Applied Pyrolysis, 2001, 58–59: 789–801

[129] Vera-Sorroche J , Kelly A L , Brown E C , Gough T , Abeykoon C , Coates P D , Deng J , Li K , Harkin-Jones E , Price M . The effect of melt viscosity on thermal efficiency for single screw extrusion of HDPE. Chemical Engineering Research & Design, 2014, 92(11): 2404–2412

[130] Stelmachowski M . Thermal conversion of waste polyolefins to the mixture of hydrocarbons in the reactor with molten metal bed. Energy Conversion and Management, 2010, 51(10): 2016–2024

[131] Riedewald F , Zuber J , Rathsack P , Duffy G , O’Mahoney M , Sousa-Gallagher M . Chemical recycling of polyolefins with the molten metal reactor at 460 °C. Chemieingenieurtechnik, 2023, 95(8): 1332–1338

[132] Stelmachowski M . Feedstock recycling of waste polymers by thermal cracking in molten metal: thermodynamic analysis. Journal of Material Cycles and Waste Management, 2014, 16(2): 211–218

[133] Jin Z , Chen D , Yin L , Hu Y , Zhu H , Hong L . Molten waste plastic pyrolysis in a vertical falling film reactor and the influence of temperature on the pyrolysis products. Chinese Journal of Chemical Engineering, 2018, 26(2): 400–406

[134] Jin Z , Yin L , Chen D , Jia Y , Yuan J , Yu B . Heat transfer characteristics of molten plastics in a vertical falling film reactor. Chinese Journal of Chemical Engineering, 2019, 27(5): 1015–1020

[135] Jin Z , Yin L , Chen D , Jia Y , Yuan J , Hu Y . Co-pyrolysis characteristics of typical components of waste plastics in a falling film pyrolysis reactor. Chinese Journal of Chemical Engineering, 2018, 26(10): 2176–2184

[136] De Conto D , Silvestre W P , Baldasso C , Godinho M . Performance of rotary kiln reactor for the elephant grass pyrolysis. Bioresource Technology, 2016, 218: 153–160

[137] Yazdani E , Hashemabadi S H , Taghizadeh A . Study of waste tire pyrolysis in a rotary kiln reactor in a wide range of pyrolysis temperature. Waste Management, 2019, 85: 195–201

[138] Ma Z , Gao N , Xie L , Li A . Study of the fast pyrolysis of oilfield sludge with solid heat carrier in a rotary kiln for pyrolytic oil production. Journal of Analytical and Applied Pyrolysis, 2014, 105: 183–190

[139] HornungASeifertH. Rotary kiln pyrolysis of polymers containing heteroatoms. Feedstock Recycling and Pyrolysis of Waste Plastics, 2006, 549–567

[140] Zhang Y , Ji G , Chen C , Wang Y , Wang W , Li A . Liquid oils produced from pyrolysis of plastic wastes with heat carrier in rotary kiln. Fuel Processing Technology, 2020, 206: 106455

[141] Yang C , Shang H , Li J , Fan X , Sun J , Duan A . A review on the microwave-assisted pyrolysis of waste plastics. Processes (Basel, Switzerland), 2023, 11(5): 1487

[142] Ludlow-Palafox C , Chase H A . Microwave-induced pyrolysis of plastic wastes. Industrial & Engineering Chemistry Research, 2001, 40(22): 4749–4756

[143] Cui Y , Zhang Y , Cui L , Liu Y , Li B , Liu W . Microwave-assisted pyrolysis of polypropylene plastic for liquid oil production. Journal of Cleaner Production, 2023, 411: 137303

[144] Wan Mahari W A , Chong C T , Lam W H , Anuar T N S T , Ma N L , Ibrahim M D , Lam S S . Microwave co-pyrolysis of waste polyolefins and waste cooking oil: influence of N₂ atmosphere versus vacuum environment. Energy Conversion and Management, 2018, 171: 1292–1301

[145] Zeng Y , Wang Y , Liu Y , Dai L , Wu Q , Xia M , Zhang S , Ke L , Zou R , Ruan R . Microwave catalytic co-pyrolysis of waste cooking oil and low-density polyethylene to produce monocyclic aromatic hydrocarbons: effect of different catalysts and pyrolysis parameters. Science of the Total Environment, 2022, 809: 152182

[146] Undri A , Rosi L , Frediani M , Frediani P . Fuel from microwave assisted pyrolysis of waste multilayer packaging beverage. Fuel, 2014, 133: 7–16

[147] Ge S , Yek P N Y , Cheng Y W , Xia C , Wan Mahari W A , Liew R K , Peng W , Yuan T Q , Tabatabaei M , Aghbashlo M . . Progress in microwave pyrolysis conversion of agricultural waste to value-added biofuels: a batch to continuous approach. Renewable & Sustainable Energy Reviews, 2021, 135: 110148

[148] Kaminsky W , Zorriqueta I J N . Catalytical and thermal pyrolysis of polyolefins. Journal of Analytical and Applied Pyrolysis, 2007, 79(1): 368–374

[149] Jing X , Yan G , Zhao Y , Wen H , Xu Z . Study on mild cracking of polyolefins to liquid hydrocarbons in a closed batch reactor for subsequent olefin recovery. Polymer Degradation & Stability, 2014, 109: 79–91

[150] Das P , Tiwari P . Valorization of packaging plastic waste by slow pyrolysis. Resources, Conservation and Recycling, 2018, 128: 69–77

[151] Santos E , Rijo B , Lemos F , Lemos M A N D A . A catalytic reactive distillation approach to high density polyethylene pyrolysis—Part 1—Light olefin production. Chemical Engineering Journal, 2019, 378: 122077

[152] Pan R , Ferreira Martins M , Debenest G . Pyrolysis of waste polyethylene in a semi-batch reactor to produce liquid fuel: optimization of operating conditions. Energy Conversion and Management, 2021, 237: 114114

[153] Zheng Z , Yang Y , Huang K , Hu J , Jie S , Li B G . Real-time detection of atmosphere composition in three-component gas-phase copolymerization of olefins. Macromolecular Reaction Engineering, 2018, 12(6): 1800042

[154] Al-Salem S M , Chandrasekaran S R , Dutta A , Sharma B K . Study of the fuel properties of extracted oils obtained from low and linear low density polyethylene pyrolysis. Fuel, 2021, 304: 121396

[155] Marcilla A , Beltrán M I , Navarro R . Evolution of products during the degradation of polyethylene in a batch reactor. Journal of Analytical and Applied Pyrolysis, 2009, 86(1): 14–21

[156] Al-Salem S M , Dutta A . Wax recovery from the pyrolysis of virgin and waste plastics. Industrial & Engineering Chemistry Research, 2021, 60(22): 8301–8309

[157] Muhammad C , Onwudili J A , Williams P T . Thermal degradation of real-world waste plastics and simulated mixed plastics in a two-stage pyrolysis-catalysis reactor for fuel production. Energy & Fuels, 2015, 29(4): 2601–2609

[158] Hernández M del R , García Á N , Marcilla A . Study of the gases obtained in thermal and catalytic flash pyrolysis of HDPE in a fluidized bed reactor. Journal of Analytical and Applied Pyrolysis, 2005, 73(2): 314–322

[159] Donaj P J , Kaminsky W , Buzeto F , Yang W . Pyrolysis of polyolefins for increasing the yield of monomers’ recovery. Waste Management, 2012, 32(5): 840–846

[160] Mastellone M L , Zaccariello L , Arena U . Co-gasification of coal, plastic waste and wood in a bubbling fluidized bed reactor. Fuel, 2010, 89(10): 2991–3000

[161] Xiong Q , Aramideh S , Kong S C . Modeling effects of operating conditions on biomass fast pyrolysis in bubbling fluidized bed reactors. Energy & Fuels, 2013, 27(10): 5948–5956

[162] Rüdisüli M , Schildhauer T J , Biollaz S M A , van Ommen J R . Scale-up of bubbling fluidized bed reactors—a review. Powder Technology, 2012, 217: 21–38

[163] Milne B J , Behie L A , Berruti F . Recycling of waste plastics by ultrapyrolysis using an internally circulating fluidized bed reactor. Journal of Analytical and Applied Pyrolysis, 1999, 51(1): 157–166

[164] Choi Y , Wang S , Yoon Y M , Jang J J , Kim D , Ryu H J , Lee D , Won Y , Nam H , Hwang B . Sustainable strategy for converting plastic waste into energy over pyrolysis: a comparative study of fluidized-bed and fixed-bed reactors. Energy, 2024, 286: 129564

[165] del Remedio Hernández M , García Á N , Marcilla A . Catalytic flash pyrolysis of HDPE in a fluidized bed reactor for recovery of fuel-like hydrocarbons. Journal of Analytical and Applied Pyrolysis, 2007, 78(2): 272–281

[166] Manzoori A R , Agarwal P K . Agglomeration and defluidization under simulated circulating fluidized-bed combustion conditions. Fuel, 1994, 73(4): 563–568

[167] Fernández-Akarregui A R , Makibar J , Alava I , Diaz L , Cueva F , Aguado R , Lopez G , Olazar M . Sand attrition in conical spouted beds. Particuology, 2012, 10(5): 592–599

[168] Aguado R , Prieto R , José M J S , Alvarez S , Olazar M , Bilbao J . Defluidization modelling of pyrolysis of plastics in a conical spouted bed reactor. Chemical Engineering and Processing, 2005, 44(2): 231–235

[169] Artetxe M , Lopez G , Amutio M , Elordi G , Olazar M , Bilbao J . Operating conditions for the pyrolysis of poly-(ethylene terephthalate) in a conical spouted-bed reactor. Industrial & Engineering Chemistry Research, 2010, 49(5): 2064–2069

[170] Elordi G , Olazar M , Lopez G , Amutio M , Artetxe M , Aguado R , Bilbao J . Catalytic pyrolysis of HDPE in continuous mode over zeolite catalysts in a conical spouted bed reactor. Journal of Analytical and Applied Pyrolysis, 2009, 85(1): 345–351

[171] Elordi G , Olazar M , Castaño P , Artetxe M , Bilbao J . Polyethylene cracking on a spent FCC catalyst in a conical spouted bed. Industrial & Engineering Chemistry Research, 2012, 51(43): 14008–14017

[172] Orozco S , Santamaria L , Artetxe M , Alvarez J , Bilbao J , Olazar M , Lopez G . Influence of oxidative conditions on the deactivation of an equilibrium FCC catalyst in the fast pyrolysis of HDPE in a conical spouted bed reactor. Chemical Engineering Journal, 2023, 472: 144947

[173] Fernandez-Akarregi A R , Makibar J , Lopez G , Amutio M , Altzibar H , Olazar M . Development of a dual conical spouted bed system for heat integration purposes. Powder Technology, 2014, 268: 261–268

[174] Pal S , Kumar A , Sharma A K , Ghodke P K , Pandey S , Patel A . Recent advances in catalytic pyrolysis of municipal plastic waste for the production of hydrocarbon fuels. Processes, 2022, 10(8): 1497

[175] Schweighuber A , Felgel-Farnholz A , Bögl T , Fischer J , Buchberger W . W. Investigations on the influence of multiple extrusion on the degradation of polyolefins. Polymer Degradation & Stability, 2021, 192: 109689

[176] Li J , Lai L , Wu L , Severtson S J , Wang W J . Enhancement of water vapor barrier properties of biodegradable poly(butylene adipate-co-terephthalate) films with highly oriented organomontmorillonite. ACS Sustainable Chemistry & Engineering, 2018, 6(5): 6654–6662

[177] Martínez J D , Campuzano F , Cardona-Uribe N , Arenas C N , Muñoz-Lopera D . Waste tire valorization by intermediate pyrolysis using a continuous twin-auger reactor: operational features. Waste Management, 2020, 113: 404–412

[178] Haydary J , Susa D , Gelinger V , Čacho F . Pyrolysis of automobile shredder residue in a laboratory scale screw type reactor. Journal of Environmental Chemical Engineering, 2016, 4(1): 965–972

[179] Henrich E , Dahmen N , Weirich F , Reimert R , Kornmayer C . Fast pyrolysis of lignocellulosics in a twin screw mixer reactor. Fuel Processing Technology, 2016, 143: 151–161

[180] Park K B , Oh S J , Begum G , Kim J S . Production of clean oil with low levels of chlorine and olefins in a continuous two-stage pyrolysis of a mixture of waste low-density polyethylene and polyvinyl chloride. Energy, 2018, 157: 402–411

[181] Netsch N , Vogt J , Richter F , Straczewski G , Mannebach G , Fraaije V , Tavakkol S , Mihan S , Stapf D . Chemical recycling of polyolefinic waste to light olefins by catalytic pyrolysis. Chemieingenieurtechnik, 2023, 95(8): 1305–1313

[182] Serrano D P , Aguado J , Escola J M , Garagorri E . Performance of a continuous screw kiln reactor for the thermal and catalytic conversion of polyethylene-lubricating oil base mixtures. Applied Catalysis B: Environmental, 2003, 44(2): 95–105

[183] Mascarenhas N , Mudawar I . Investigation of eddy diffusivity and heat transfer coefficient for free-falling turbulent liquid films subjected to sensible heating. International Journal of Heat and Mass Transfer, 2013, 64: 647–660

[184] Yin L J , Chen D Z , Wang H , Ma X B , Zhou G M . Simulation of an innovative reactor for waste plastics pyrolysis. Chemical Engineering Journal, 2014, 237: 229–235

[185] Chen D , Yin L , Wang H , He P . Pyrolysis technologies for municipal solid waste: a review. Waste Management, 2014, 34(12): 2466–2486

[186] Kodera Y , Yamamoto T , Ishikawa E . Energy- and economic-balance estimation of pyrolysis plant for fuel-gas production from plastic waste based on bench-scale plant operations. Fuel Communications, 2021, 7: 100016

[187] Putra P H M , Rozali S , Patah M F A , Idris A . A review of microwave pyrolysis as a sustainable plastic waste management technique. Journal of Environmental Management, 2022, 303: 114240

[188] Suriapparao D V , Nagababu G , Yerrayya A , Sridevi V . Optimization of microwave power and graphite susceptor quantity for waste polypropylene microwave pyrolysis. Process Safety and Environmental Protection, 2021, 149: 234–243

[189] Fan L , Chen P , Zhang Y , Liu S , Liu Y , Wang Y , Dai L , Ruan R . Fast microwave-assisted catalytic co-pyrolysis of lignin and low-density polyethylene with HZSM-5 and MgO for improved bio-oil yield and quality. Bioresource Technology, 2017, 225: 199–205

[190] Peng Y , Wang X , Fan L , Zhang Q , Cui X , Tian X , Wu Q , Cobb K , Ruan R , Tu H . . Conversion of low-density polyethylene into monocyclic aromatic hydrocarbons through continuous microwave pyrolysis with ex-situ dual-catalyst beds. Journal of Cleaner Production, 2023, 418: 138039

[191] Estel L , Poux M , Benamara N , Polaert I . Continuous flow-microwave reactor: where are we?. Chemical Engineering and Processing, 2017, 113: 56–64

[192] Fan L , Liu L , Xiao Z , Su Z , Huang P , Peng H , Lv S , Jiang H , Ruan R , Chen P , Zhou W . Comparative study of continuous-stirred and batch microwave pyrolysis of linear low-density polyethylene in the presence/absence of HZSM-5. Energy, 2021, 228: 120612

[193] Fan L , Su Z , Wu J , Xiao Z , Huang P , Liu L , Jiang H , Zhou W , Liu S , Ruan R . Integrating continuous-stirred microwave pyrolysis with ex-situ catalytic upgrading for linear low-density polyethylene conversion: effects of parameter conditions. Journal of Analytical and Applied Pyrolysis, 2021, 157: 105213

[194] Fan L , Zhang Y , Liu S , Zhou N , Chen P , Liu Y , Wang Y , Peng P , Cheng Y , Addy M , Lei H , Ruan R . Ex-situ catalytic upgrading of vapors from microwave-assisted pyrolysis of low-density polyethylene with MgO. Energy Conversion and Management, 2017, 149: 432–441

[195] Li A M , Li X D , Li S Q , Ren Y , Chi Y , Yan J H , Cen K F . Pyrolysis of solid waste in a rotary kiln: influence of final pyrolysis temperature on the pyrolysis products. Journal of Analytical and Applied Pyrolysis, 1999, 50(2): 149–162

[196] Lechleitner A E , Schubert T , Hofer W , Lehner M . Lumped kinetic modeling of polypropylene and polyethylene co-pyrolysis in tubular reactors. Processes, 2021, 9(1): 34

[197] Karaduman A , Koçak M Ç , Bilgesü A Y . Flash vacuum pyrolysis of low density polyethylene in a free-fall reactor. Polymer-Plastics Technology and Engineering, 2003, 42(2): 181–191

Competing interests

The authours declare that they have no competing interests.

Acknowledgements

The authors are thankful for the financial support of the National Natural Science Foundation (Grant Nos. 22293061, 22208292); Zhejiang Provincial Natural Science Foundation (Grant Nos. LD24E030003); the State Key Laboratory of Chemical Engineering (Grant Nos. SKL-ChE-23D02, SKL-ChE-23T04); the Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering (Grant No 2022SZ-TD003); the Research Funds of Institute of Zhejiang University-Quzhou (Grant Nos. IZQ2021RCZX002, IZQ2021RCZX003, IZQ2021KJ2011 and IZQ2022RCZX201). We also acknowledge the staff from the Analysis & Testing Center, Institute of Zhejiang University-Quzhou, and the State Key Laboratory of Chemical Engineering, Zhejiang University.

版权

2024 Higher Education Press