Selenium confined in ZIF-8 derived porous carbon@MWCNTs 3D networks: tailoring reaction kinetics for high performance lithium-selenium batteries

Abstract

Lithium-selenium battery is nowadays a highly competing technology to the commercial Li-ion battery because it has a high volumetric capacity of 3253 mAh cm^-3 and gravimetric capacity of 675 mAh g^-1. However, the practical application of lithium-selenium (Li-Se) batteries is impeded by the shuttle effect of the soluble polyselenides during the cycling process. Herein, we report the in situ growth and pyrolysis of the metal-organic framework zeolitic imidazolate framework-8 (ZIF-8) on three-dimensional (3D) interconnected highly conductive multiwalled carbon nanotubes (MWCNTs). The obtained composites are used to anchor Se for advanced Li-Se batteries. Compared with the isolated ZIF-8 derived microporous carbon, our synthesized ZIF-8 derived porous carbon@MWCNTs (ZIF-8-C@MWCNTs) 3D highly conductive networks facilitate lithium ion diffusion and electron transportation. The particle size of ZIF-8 crystals has an important impact on the battery performance. By adjusting the particle size of ZIF-8, the electrochemical reaction kinetics in ZIF-8-C@MWCNTs 3D networks can be tuned. The optimized particle size of ZIF-8 around 300-500 nm coated on MWCNTs composite achieves an excellent initial discharge capacity of 756 mAh g^-1 and a stabilized capacity of 468 mAh g^-1 at 0.2 C after 200 cycles. Combining the 3D MWCNTs with the appropriate size of ZIF-8 derived microporous carbon particles could highly improve the performance of the Li-Se battery. This work provides significant guidance for further structural design and host particle size selection for high-performance Li-Se batteries.

Keywords

Metal-organic framework (MOF) / carbon nanotubes / lithium-selenium battery / in situ growth / zeolitic imidazolate framework-8 (ZIF-8) / crystal size

References

[1] Peng H,Cheng X.Lithium-sulfur batteries: review on high-loading and high-energy lithium-sulfur batteries (Adv. Energy Mater. 24/2017).Adv Energy Mater2017;7:1770141

[2] Zhao M,Li XY,Huang JQ.An organodiselenide comediator to facilitate sulfur redox kinetics in lithium-sulfur batteries.Adv Mater2021;33:e2007298

[3] Zhang Y,Wu L.A flexible, hierarchically porous PANI/MnO₂ network with fast channels and an extraordinary chemical process for stable fast-charging lithium-sulfur batteries.J Mater Chem A2020;8:2741-51

[4] Wang X,Liu Z.New insight into the confinement effect of microporous carbon in Li/Se battery chemistry: a cathode with enhanced conductivity.Small2020;16:e2000266

[5] Lin S,Wang Y.Three-dimensional ordered porous nanostructures for lithium-selenium battery cathodes that confer superior energy-storage performance.ACS Appl Mater Interfaces2021;13:9955-64

[6] Yang CP,Guo YG.Elemental selenium for electrochemical energy storage.J Phys Chem Lett2015;6:256-66

[7] Xiang H,Zhao H.A review on electronically conducting polymers for lithium-sulfur battery and lithium-selenium battery: progress and prospects.Journal of Energy Chemistry2021;58:523-56

[8] Kim S,Lee Y.High-performance Li-Se battery enabled via a one - piece cathode design.Adv Energy Mater2019;10:1903477

[9] Jin J,Srikanth N,Zhou K.Advances and challenges of nanostructured electrodes for Li-Se batteries.J Mater Chem A2017;5:10110-26

[10] Li Z,Yi Z,Huang Y.Confined selenium within porous carbon nanospheres as cathode for advanced Li-Se batteries.Nano Energy2014;9:229-36

[11] Zheng F,Chen Q.High lithium anodic performance of highly nitrogen-doped porous carbon prepared from a metal-organic framework.Nat Commun2014;5:5261

[12] Youn HC,Roh KC.Graphene-selenium hybrid microballs as cathode materials for high-performance lithium-selenium secondary battery applications.Sci Rep2016;6:30865 PMCID:PMC4969586

[13] He J,Lv W.Three-dimensional hierarchical graphene-CNT@Se: a highly efficient freestanding cathode for Li-Se batteries.ACS Energy Lett2016;1:16-20

[14] Chen LH,Su BL.Hierarchy in materials for maximized efficiency.Natl Sci Rev2020;7:1626-30 PMCID:PMC8290953

[15] Wu L,Fu Z.Hierarchically structured porous materials: synthesis strategies and applications in energy storage.Natl Sci Rev2020;7:1667-701 PMCID:PMC8288509

[16] Fan S,Li S,Xu J.Hollow selenium encapsulated into 3D graphene hydrogels for lithium-selenium batteries with high rate performance and cycling stability.RSC Adv2017;7:21281-6

[17] Fan JM,Zhang Q.An Amorphous carbon nitride composite derived from ZIF-8 as anode material for sodium-ion batteries.ChemSusChem2015;8:1856-61

[18] Song JP,Dong WD.MOF-derived nitrogen-doped core-shell hierarchical porous carbon confining selenium for advanced lithium-selenium batteries.Nanoscale2019;11:6970-81

[19] Yang CP,Yin YX,Zhang J.An advanced selenium-carbon cathode for rechargeable lithium-selenium batteries.Angew Chem Int Ed Engl2013;52:8363-7

[20] Ji X,Nazar LF.A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries.Nat Mater2009;8:500-6

[21] Zhao Y,Li X.Metal organic frameworks for energy storage and conversion.Energy Storage Materials2016;2:35-62

[22] Wang L,Feng X,Qi P.Metal-organic frameworks for energy storage: Batteries and supercapacitors.Coordination Chemistry Reviews2016;307:361-81

[23] Liu X,Hu J.Composites of metal-organic frameworks and carbon-based materials: preparations, functionalities and applications.J Mater Chem A2016;4:3584-616

[24] Xu J,Fan H,Wang G.Updated metal compounds (MOFs, S, OH, N, C) used as cathode materials for lithium-sulfur batteries.Adv Energy Mater2018;8:1702607

[25] Pan Y,Zeng G,Lai Z.Rapid synthesis of zeolitic imidazolate framework-8 (ZIF-8) nanocrystals in an aqueous system.Chem Commun (Camb)2011;47:2071-3

[26] Cravillon J,Lohmeier S,Huber K.Rapid room-temperature synthesis and characterization of nanocrystals of a prototypical zeolitic imidazolate framework.Chem Mater2009;21:1410-2

[27] Stolar T.Mechanochemistry: an efficient and versatile toolbox for synthesis, transformation, and functionalization of porous metal-organic frameworks.CrystEngComm2020;22:4511-25

[28] Zhou J,Fan X.Rational design of a metal-organic framework host for sulfur storage in fast, long-cycle Li-S batteries.Energy Environ Sci2014;7:2715

[29] Tang J.Carbon materials: MOF morphologies in control.Nat Chem2016;8:638-9

[30] Dang S,Xu Q.Nanomaterials derived from metal-organic frameworks.Nat Rev Mater2018;3:17075

[31] Lim S,Kim Y.Porous carbon materials with a controllable surface area synthesized from metal-organic frameworks.Chem Commun (Camb)2012;48:7447-9

[32] Chaikittisilp W,Yamauchi Y.A new family of carbon materials: synthesis of MOF-derived nanoporous carbons and their promising applications.J Mater Chem A2013;1:14-9

[33] Wu HB.Metal-organic frameworks and their derived materials for electrochemical energy storage and conversion: promises and challenges.Sci Adv2017;3:eaap9252 PMCID:PMC5714063

[34] Liu Y,Zhou X.A selenium-confined microporous carbon cathode for ultrastable lithium-selenium batteries.J Mater Chem A2014;2:17735-9

[35] Li X,Liu J,Li R.Tunable porous structure of metal organic framework derived carbon and the application in lithium-sulfur batteries.Journal of Power Sources2016;302:174-9

[36] Kim D,Hong WG.Graphene/ZIF-8 composites with tunable hierarchical porosity and electrical conductivity.J Mater Chem A2016;4:7710-7

[37] Chen K,Fang R,Cheng H.Metal-organic frameworks (MOFs)-derived nitrogen-doped porous carbon anchored on graphene with multifunctional effects for lithium-sulfur batteries.Adv Funct Mater2018;28:1707592

[38] Park S,Kang YC.Selenium-infiltrated metal-organic framework-derived porous carbon nanofibers comprising interconnected bimodal pores for Li-Se batteries with high capacity and rate performance.J Mater Chem A2018;6:1028-36

[39] Yu W,Li C.Interwoven scaffolded porous titanium oxide nanocubes/carbon nanotubes framework for high-performance sodium-ion battery.Journal of Energy Chemistry2021;59:38-46

[40] Yuan L,Qiu X,Zhu W.Improvement of cycle property of sulfur-coated multi-walled carbon nanotubes composite cathode for lithium/sulfur batteries.Journal of Power Sources2009;189:1141-6

[41] Lu C,Zhao J,Chen W.A continuous carbon nitride polyhedron assembly for high-performance flexible supercapacitors.Adv Funct Mater2017;27:1606219

[42] Huang G,Du X,Yin D.Metal organic frameworks route to in situ insertion of multiwalled carbon nanotubes in Co₃O₄ polyhedra as anode materials for lithium-ion batteries.ACS Nano2015;9:1592-9

[43] Wu R,Rui X.In-situ formation of hollow hybrids composed of cobalt sulfides embedded within porous carbon polyhedra/carbon nanotubes for high-performance lithium-ion batteries.Adv Mater2015;27:3038-44

[44] Li C,Li H.Weaving 3D highly conductive hierarchically interconnected nanoporous web by threading MOF crystals onto multi walled carbon nanotubes for high performance Li-Se battery.Journal of Energy Chemistry2021;59:396-404

[45] Mao Y,Guo Y.Foldable interpenetrated metal-organic frameworks/carbon nanotubes thin film for lithium-sulfur batteries.Nat Commun2017;8:14628 PMCID:PMC5343496

[46] Zhang H,Zou M.3D, mutually embedded MOF@Carbon nanotube hybrid networks for high-performance lithium-sulfur batteries.Adv Energy Mater2018;8:1800013

[47] Zhu J.Electrochemical photocatalytic degradation of eriochrome black T dye using synthesized TiO₂@CNTs nanofibers.Int J Electrochem Sci2021;16:210318

[48] Kulkarni G,Phadtare V.Enhanced electromagnetic interference shielding effectiveness of chemical vapor deposited MWCNTs in X-band region.J Mater Sci: Mater Electron2017;28:7212-20

[49] Chen M,Li Y,Cao X.ZnO@ZIF-8 core-shell heterostructures with improved photocatalytic activity.CrystEngComm2021;23:4327-35

[50] Dong W,Xia F.Selenium clusters in Zn-glutamate MOF derived nitrogen-doped hierarchically radial-structured microporous carbon for advanced rechargeable Na-Se batteries.J Mater Chem A2018;6:22790-7

[51] Balakumar K.Selenium containing tube-in-tube carbon: a one dimensional carbon frame work for selenium cathode in Li-Se battery.Carbon2017;112:79-90

[52] Liu T,Jia M.Selenium embedded in metal-organic framework derived hollow hierarchical porous carbon spheres for advanced lithium-selenium batteries.ACS Appl Mater Interfaces2016;8:16063-70

[53] Dong W,Wang C.Phase conversion accelerating “Zn-Escape” effect in ZnSe-CFs heterostructure for high performance Sodium-Ion half/full batteries.Small

[54] Dong W,Li X.Bronze TiO₂ as a cathode host for lithium-sulfur batteries.Journal of Energy Chemistry2020;48:259-66

[55] Han K,Shen J,Dai F.A free-standing and ultralong-life lithium-selenium battery cathode enabled by 3D mesoporous carbon/graphene hierarchical architecture.Adv Funct Mater2015;25:455-63

[56] Qiu R,Zhang T.Biomass-derived, 3D interconnected N-doped carbon foam as a host matrix for Li/Na/K-selenium batteries.Electrochimica Acta2020;356:136832

[57] Li H,Li C.Three-dimensional ordered hierarchically porous carbon materials for high performance Li-Se battery.Journal of Energy Chemistry2022;68:624-36

[58] Xiao L,Yi J.Enhancing the performance of nanostructured ZnO as an anode material for lithium-ion batteries by polydopamine-derived carbon coating and confined crystallization.Journal of Alloys and Compounds2018;764:545-54

[59] Dong WD,Xia FJ.Melamine-based polymer networks enabled N, O, S Co-doped defect-rich hierarchically porous carbon nanobelts for stable and long-cycle Li-ion and Li-Se batteries.J Colloid Interface Sci2021;582:60-9

[60] Li Y,Zerrin T.State-of-health prediction for lithium-ion batteries via electrochemical impedance spectroscopy and artificial neural networks.Energy Storage2020;2