Please wait a minute...

Frontiers of Mechanical Engineering

Front. Mech. Eng.    2010, Vol. 5 Issue (3) : 316-321     https://doi.org/10.1007/s11465-010-0021-1
Research articles |
Remote calibration system for frequency based on in-place benchmark
Xiaobin HONG,Guixiong LIU,Zhuokui WU,Xipeng DU,
School of Mechanical & Automobile Engineering, South China University of Technology, Guangzhou 510640, China;
Download: PDF(248 KB)  
Export: BibTeX | EndNote | Reference Manager | ProCite | RefWorks
Abstract According to the deficiencies of remote calibration mode based on material object reference, a new model of a remote calibration system for frequency based on in-place benchmark is introduced, which is made of a calibration subsystem on the spot and a remote management subsystem. The key technology of some key problems for the remote calibration system is particularly discussed, including the time and frequency benchmark receiving module based on global positioning system (GPS), frequency comparison based on a phase method, frequency division based on dual high-frequency phase locked loop (PLL), and remote calibration based on the web. The results show that the system possesses some characteristics, such as high precision, good versatility, and no limitation of time and place.
Keywords remote calibration      in-place benchmark      frequency comparison      global position system (GPS)      
Issue Date: 05 September 2010
 Cite this article:   
Xiaobin HONG,Zhuokui WU,Guixiong LIU, et al. Remote calibration system for frequency based on in-place benchmark[J]. Front. Mech. Eng., 2010, 5(3): 316-321.
 URL:  
http://journal.hep.com.cn/fme/EN/10.1007/s11465-010-0021-1
http://journal.hep.com.cn/fme/EN/Y2010/V5/I3/316
Gambhir B L, Erives H. Scenestatistics based calibration of remote sensing instruments. IEEE Geoscience and Remote Sensing Letters, 2006, 3(1): 178―182

doi: 10.1109/LGRS.2005.861544
Mochizuki K, Uchino M, Morikawa T. Frequency-stability measurementsystem using high-speed ADCs and digital signal processing. IEEE Transactions on Instrumentation and Measurement, 2007, 56(5): 1887―1893

doi: 10.1109/TIM.2007.895588
Dudley R A, Ridler N M. Traceability via the internet for microware measurements using vectornetwork analyzers. IEEE Transactions onInstrumentation and Measurement, 2003, 52(1): 130―134

doi: 10.1109/TIM.2003.809482
Carullo A, Parvis M, Vallan A. A traveling standard forthe calibration of data acquisition boards. IEEE Transactions on Instrumentation and Measurement, 2004, 53(2): 557―560

doi: 10.1109/TIM.2003.820448
Albu M M, Ferrero A, Mihai F, Salicone S. Remote calibration using mobile multiagent technology. IEEE Transactions on Instrumentation and Measurement, 2005, 54(1): 24―30

doi: 10.1109/TIM.2004.838139
Lombardi M A, Novick A N. Remote time calibrations via the NIST time measurement and analysisservice. The Journal of Measurement, 2006, 1(4): 50―59
Zhou W, Ou X M, Zhou H. Measurement & Control Technologyfor Time & Frequency. 1nd ed. Xi'an: Publishing Company of Xidian University, 2006, 15―19 (in Chinese)
Zhou D C, Bian Y M, Wu H T. Study on measurement digitalization ofphase tracking points for long wave time service system. Journal of Xi’an Jiaotong University, 2006, 40(6): 729―733 (in Chinese)
Wagner C, Armenta S, Lendl-Talanta B. Developing automated analyticalmethods for scientific environments using LabVIEW. Talanta, 2010, 80(3): 1081―1087

doi: 10.1016/j.talanta.2009.08.018
Viewed
Full text


Abstract

Cited

  Shared   0
  Discussed