Solvability and thermal response of cellulose with different crystal configurations

Abstract

Cellulose is a biodegradable and renewable natural material that it is naturally resistant to breaking and modification. Moreover, the crystalline structure of cellulose is a major factor restricting its industrial utilization. In this study, cellulose polymorphs were prepared from natural cellulose, and their solvability and thermal response were investigated. Using liquid- and solid-state NMR signals, the distinct types and dissolving states of cellulose polymorphs were identified. The thermal behavior of the polymorphic forms of cellulose-d was also evaluated, and cellulose II exhibited the poorest thermal stability and a unique exothermic reaction.

Keywords

cellulose / crystal structure / thermal response / XRD / CP/MAS ¹³C NMR

参考文献

[1] Ashraf M T, Thomsen M H, Schmidt J E (2017). Hydrothermal pretreatment and enzymatic hydrolysis of mixed green and woody lignocellulosics from arid regions. Bioresource Technology, 238: 369–378

[2] Balat M (2008). Mechanisms of thermochemical biomass conversion processes. Part 1: Reactions of pyrolysis. Energy Sources. Part A, Recovery, Utilization, and Environmental Effects, 30(7): 620–635

[3] Bertran M S, Dale B E (1986). Determination of cellulose accessibility by differential scanning calorimetry. Journal of Applied Polymer Science, 32(3): 4241–4253

[4] Cai J, Liu Y, Zhang L (2006). Dilute solution properties of cellulose in LiOH/urea aqueous system. Journal of Polymer Science. Part B, Polymer Physics, 44(21): 3093–3101

[5] Cai J, Zhang L N, Liu S L, Liu Y T, Xu X J, Chen X M, Chu B, Guo X L, Xu J, Cheng H, Han C C, Kuga S (2008). Dynamic self-assembly induced rapid dissolution of cellulose at low temperatures. Macromolecules, 41(23): 9345–9351

[6] Cai J, Zhang L N, Zhou J P, Li H, Chen H, Jin H M (2004). Novel fibers prepared from cellulose in NaOH/urea aqueous solution. Macromolecular Rapid Communications, 25(17): 1558–1562

[7] Chen J H, Wang K, Xu F, Sun R C (2014). Progress of preparing regenerated cellulose fibers using novel dissolution process. CIESC Journal, 65: 4213–4221

[8] Chen X, Chen J, You T, Wang K, Xu F (2015). Effects of polymorphs on dissolution of cellulose in NaOH/urea aqueous solution. Carbohydrate Polymers, 125: 85–91

[9] Chen X M, Burger C, Fang D F, Ruan D, Zhang L N, Hsiao B S, Chu B (2006). X-ray studies of regenerated cellulose fibers wet spun from cotton linter pulp in NaOH/thiourea aqueous solutions. Polymer, 47(8): 2839–2848

[10] Cheng G, Varanasi P, Li C, Liu H, Melnichenko Y B, Simmons B A, Kent M S, Singh S (2011). Transition of cellulose crystalline structure and surface morphology of biomass as a function of ionic liquid pretreatment and its relation to enzymatic hydrolysis. Biomacromolecules, 12(4): 933–941

[11] Egal M, Budtova T, Navard P (2008). The dissolution of microcrystalline cellulose in sodium hydroxide-urea aqueous solutions. Cellulose (London, England), 15(3): 361–370

[12] Himmel M E, Ding S Y, Johnson D K, Adney W S, Nimlos M R, Brady J W, Foust T D (2007). Biomass recalcitrance: Engineering plants and enzymes for biofuels production. Science, 315(5813): 804–807

[13] Huang H, Liu Y, Chao M A, Jiyou G U (2016). Research progress in the application of cellulose and its derivatives. Materials Review, 21: 75–82

[14] Idström A, Schantz S, Sundberg J, Chmelka B F, Gatenholm P, Nordstierna L (2016). (¹³⁾C NMR assignments of regenerated cellulose from solid-state 2D NMR spectroscopy. Carbohydrate Polymers, 151: 480–487

[15] Ishikawa A, Okano T, Sugiyama J (1997). Fine structure and tensile properties of ramie fibres in the crystalline form of cellulose I, II, III_I and IV_I. Polymer, 38(2): 463–468

[16] Isogai A (1997). NMR analysis of cellulose dissolved in aqueous NaOH solutions. Cellulose (London, England), 4(2): 99–107

[17] Isogai A, Usuda M, Kato T, Uryu T, Atalla R H (1989). Solid-state CP/MAS carbon-13 NMR study of cellulose polymorphs. Macromolecules, 22(7): 3168–3172

[18] Jeoh T, Ishizawa C I, Davis M F, Himmel M E, Adney W S, Johnson D K (2007). Cellulase digestibility of pretreated biomass is limited by cellulose accessibility. Biotechnology and Bioengineering, 98(1): 112–122

[19] Jin F, Zhang J, Chen W, Fan Q, Bai Z (2012). Preparation and chiral recognition of new chiral stationary phases derived from cellulose microspheres. Wuhan University Journal of Natural Sciences, 17(3): 205–210

[20] Jin H, Zha C, Gu L (2007). Direct dissolution of cellulose in NaOH/thiourea/urea aqueous solution. Carbohydrate Research, 342(6): 851–858

[21] Junior J L P (2000). Effect of cellulose crystallinity on the progress of thermal oxidative degradation of paper. Journal of Applied Polymer Science, 78: 61–66

[22] Kono H, Erata T, Takai M (2003). Complete assignment of the CP/MAS ¹³C NMR spectrum of cellulose III_I. Macromolecules, 36(10): 3589–3592

[23] Kumar P, Barrett D M, Delwiche M J, Stroeve P (2009). Methods for pretreatment of lignocellulosic biomass for efficient hydrolysis and biofuel production. Industrial & Engineering Chemistry Research, 48(8): 3713–3729

[24] Langan P, Nishiyama Y, Chanzy H (1999). A revised structure and hydrogen-bonding system in cellulose II from a neutron fiber diffraction analysis. Journal of the American Chemical Society, 121(43): 9940–9946

[25] Lennholm H, Larsson T, Iversen T (1994). Determination of cellulose I[alpha] and I[beta] in lignocellulosic materials. Carbohydrate Research, 261(1): 119–131

[26] Liebert T, Heinze T, Edgar K J (2010). Cellulose solvents: For analysis, shaping and chemical modification. Journal of the American Chemical Society, 132: 17976–17976

[27] Liitiä T, Maunu S L, Hortling B, Tamminen T, Pekkala O, Varhimo A (2003). Cellulose crystallinity and ordering of hemicelluloses in pine and birch pulps as revealed by solid-state NMR spectroscopic methods. Cellulose (London, England), 10(4): 307–316

[28] Lou Y R, Kanninen L, Kuisma T, Niklander J, Noon L A, Burks D, Urtti A, Yliperttula M (2014). The use of nanofibrillar cellulose hydrogel as a flexible three-dimensional model to culture human pluripotent stem cells. Stem Cells and Development, 23(4): 380–392

[29] Luo X, Zhang L (2010). Immobilization of penicillin G acylase in epoxy-activated magnetic cellulose microspheres for improvement of biocatalytic stability and activities. Biomacromolecules, 11(11): 2896–2903

[30] Madaeni S S, Heidary F (2011). Improving separation capability of regenerated cellulose ultrafiltration membrane by surface modification. Applied Surface Science, 257(11): 4870–4876

[31] Moigne N L, Navard P (2010). Dissolution mechanisms of wood cellulose fibres in NaOH–water. Cellulose (London, England), 17(1): 31–45

[32] Mori T, Chikayama E, Tsuboi Y, Ishida N, Shisa N, Noritake Y, Moriya S, Kikuchi J (2012). Exploring the conformational space of amorphous cellulose using NMR chemical shifts. Carbohydrate Polymers, 90(3): 1197–1203

[33] Mosier N, Wyman C, Dale B, Elander R, Lee Y Y, Holtzapple M, Ladisch M (2005). Features of promising technologies for pretreatment of lignocellulosic biomass. Bioresource Technology, 96(6): 673–686

[34] Nishino T, Matsuda I, Hirao K (2004). All-cellulose composite. Macromolecules, 37(20): 7683–7687

[35] Perlack R D, Wright L L, Turhollow A F, Graham R L, Stokes B J, Erbach D C (2005). Biomass as feedstock for a bioenergy and bioproducts industry: The technical feasibility of a billion-ton annual supply. Oak Ridge National Lab TN, doi: 10.2172/885984

[36] Qin X, Lu A, Cai J, Zhang L (2013a). Stability of inclusion complex formed by cellulose in NaOH/urea aqueous solution at low temperature. Carbohydrate Polymers, 92(2): 1315–1320

[37] Qin X, Lu A, Zhang L (2013b). Gelation behavior of cellulose in NaOH/urea aqueous system via cross-linking. Cellulose (London, England), 20(4): 1669–1677

[38] Sarko A (1978). What is the crystalline structure of cellulose? Technical Association of the Pulp and Paper Industry, Tappi

[39] Segal L, Creely J J, Martin A E Jr, Conrad C M (1959). An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Textile Research Journal, 29(10): 786–794

[40] Teng N, Ni J, Chen H Z, Ren Q H, Na H N, Liu X Q, Zhang R Y, Zhu J (2016). Initiating highly effective hydrolysis of regenerated cellulose by controlling transition of crystal form with sulfolane under microwave radiation. ACS Sustainable Chemistry & Engineering, 4(3): 1507–1511

[41] Tsarevsky N V, Bernaerts K, Dufour B, Prez F D, Matyjaszewski K (2004). Well-defined (Co) polymers with 5-vinyltetrazole units via combination of atom transfer radical (Co) polymerization of acrylonitrile and “click chemistry”-type postpolymerization modification. Macromolecules, 37(25): 9308–9313

[42] Wang J, Lin X, Luo X, Yao W (2015). Preparation and characterization of the linked lanthanum carboxymethylcellulose microsphere adsorbent for removal of fluoride from aqueous solutions. RSC Advances, 5(73): 59273–59285

[43] Wang L H, Wang Y L, Zhao X S, Han Z (2013). Comparative study on the method of extracting straw cellulose. Zhongguo Nongxue Tongbao, 29: 130–134 (in Chinese)

[44] Wang T, Phyo P, Hong M (2016). Multidimensional solid-state NMR spectroscopy of plant cell walls. Solid State Nuclear Magnetic Resonance, 78: 56–63

[45] Wang Y, Deng Y (2009). The kinetics of cellulose dissolution in sodium hydroxide solution at low temperatures. Biotechnology and Bioengineering, 102(5): 1398–1405

[46] Yang B, Wyman C E (2008). Pretreatment: The key to unlocking low-cost cellulosic ethanol. Biofuels, Bioproducts & Biorefining, 2(1): 26–40

[47] Yui T, Okayama N, Hayashi S (2010). Structure conversions of cellulose III_I crystal models in solution state: A molecular dynamics study. Cellulose (London, England), 17(4): 679–691

[48] Zhang J Q, Lin L, Sun Y, Mitchell G, Liu S J (2008). Advance of studies on structure and decrystallization of cellulose. Linchan Huaxue Yu Gongye, 28: 109–114 (in Chinese)

版权

2019 Higher Education Press